59.140.30 皮革和裘皮 标准查询与下载

ASTM D4704-13(2023) 皮革撕裂强度、舌撕裂的标准试验方法

1.1 This test method is intended for determining the tearing strength of leather by measuring the force required to tear a specimen cut perpendicular to the surface. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tearing Strength, Tongue Tear of Leather

ASTM D5052-18(2023) 皮革对水蒸气渗透性的标准试验方法

1.1 This test method covers the determination of the permeability of leather to water vapor by measuring the rate at which water vapor passes through a test specimen. This test method does not apply to wet blue. 1.2 The values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents, therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Permeability of Leather to Water Vapor

ASTM D1610-18(2023) 试验用皮革和皮革制品的调节

1.1 This practice covers the conditioning of all units and specimens of leather and leather products prior to testing and the conditions under which they should be tested. This practice does not apply to wet blue. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Conditioning Leather and Leather Products for Testing

ASTM D7912-14(2023) 饰面耐热老化性（饰面稳定性）的标准试验方法

1.1 This test method covers the determination of resistance of leather finish to cracking, flaking or becoming tacky after aging. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)

ASTM D2322-14(2023) 鞋面革耐人造汗性的标准试验方法

1.1 This test method covers the determination of the effect of perspiration on shoe upper leather. The leather is subjected to treatment with a formulation of artificial perspiration specific for breakdown of leather. Resistance to grain cracking as measured in accordance with Test Method D2210 and area loss are used as the criterion of deterioration. The artificial perspiration may also affect the flexibility of the leather. However, these effects have not been fully evaluated as criteria of deterioration in this test method. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration

ASTM D4705-18(2023) 双孔皮革缝合撕裂强度的标准试验方法

1.1 This test method is intended for use in determining the stitch tearing resistance of leather using a double hole tear. It is particularly applicable to lightweight leathers. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Stitch Tear Strength of Leather, Double Hole

ASTM D1912-00(2023) 装饰皮革耐冷裂性的标准试验方法

1.1 This test method2 covers the measurement of the coldcrack resistance on all types of upholstery leathers, but especially in the field of automotive upholstery.3 This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Cold-Crack Resistance of Upholstery Leather

ASTM D6076-18(2023) 皮革收缩温度的标准试验方法

1.1 This test method covers the determination of the shrinkage temperature of all types of leather. The heating medium is water when the shrinkage temperature is at or below 98 °C. The heating medium is a glycerine-water solution when the shrinkage temperature is above 98 °C. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Shrinkage Temperature of Leather

ASTM D8137-18(2023) 皮革加速老化的实施规程

1.1 This practice is based on studies relating the rate of deterioration of leathers having known durabilities from longterm storage of samples, to the deterioration experienced by laboratory exposure of specimens to known contents of acid gases in air or oxygen. This is accomplished by measuring the deterioration (reduction in tensile strength) of leather specimens when they are subjected to exposure to a mixture of air, moisture and sulfur dioxide at a given temperature and pressure and for a given exposure time. The loss of tensile strength of the specimens resulting from this exposure is compared to that experienced by a variety of leathers having various tannages and having historically long and short service lifetimes. The initial tensile strength and the degree of loss of tensile strength is related to what service life can be anticipated from a given leather. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Practice for Accelerated Aging of Leather

ASTM D6077-16(2023) 皮革梯形撕裂强度的标准试验方法

1.1 This test method covers the measurement of the tearing load of nonwoven fabrics by the trapezoid method for leather. This test method does not apply to wet blue. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Trapezoid Tearing Strength of Leather

ISO 19076:2023 | IULTCS/IUP 58 皮革 皮革表面的测量 电子技术

Leather — Measurement of leather surface — Electronic techniques

ISO 14268:2023 | IULTCS/IUP 15 皮革 物理和机械试验 水蒸气渗透性的测定

Leather — Physical and mechanical tests — Determination of water vapour permeability

T/ZPGX 001-2022 鞋面用皮革

本文件规定了鞋面用皮革的产品分类、要求、分级、试验方法、检验规则和包装、标志、运输、贮存。

Shoe upper leather

T/ZPGX 002-2022 鞋里用皮革

本文件规定了鞋里用皮革的要求、试验方法、检验规则和标志、包装、运输、贮存。

Lining leather

BS ISO 5431:2022 皮革 蓝色湿山羊皮 规格

1   Scope This document specifies requirements, sampling methods and testing methods for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.

Leather. Wet blue goat skins. Specification

BS ISO 5432:2022 皮革 湿蓝羊皮 规格

1   Scope This document specifies requirements, sampling methods and testing methods for wet blue leather produced from sheep skins tanned without wool and with the use of basic chromium sulfate as the primary tanning agent.

Leather. Wet blue sheep skins. Specification

BS ISO 5433:2022 皮革 牛蓝湿皮 规格

1   Scope This document specifies requirements, sampling methods and testing methods for wet blue leather produced from bovine hides and parts of bovine hides tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.

Leather. Bovine wet blue. Specification

T/WZB 001-2023 牛皮家具用皮革

本标准规定了牛皮家具用皮革的基本要求、技术要求、试验方法、检测规则、标志、包装、运输和贮存、质量承诺。

LeatherForCowhideFurniture

T/ZZB 2927-2022 服装用水貂毛皮

本文件规定了服装用水貂毛皮的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺等内容。 本文件适用于成人服装用水貂毛皮。

Minks for garment

22/30461264 DC BS EN ISO 20137 皮革 化学测试 皮革中关键化学品测试指南

BS EN ISO 20137. Leather. Chemical tests. Guidelines for testing critical chemicals in leather