65.060.80 林业设备 标准查询与下载

GB/T 5390-1995 油锯 耳旁噪声测定方法

本标准规定了油锯在操作者位置上噪声A声级和倍频带声压级的测定方法。 本标准适用于便携式油锯，油锯操作条件模拟林区现场情况。

Portable chain saws--Measurement at the operator's position of air-borne noise

GB/T 15103-1994 绞盘机 技术条件

本标准规定 了绞盘机的术语、型式与参数、基本技术要求、装配质量要求、安全要求、检验规则以及标志和包装。 本标准适用于林业生产中进行集材、装卸、归楞、推河、出河、编排等作业的绞盘机。

Winches for forestry-Technical requirements

GB/T 5391-1985 油锯 台架试验方法

本标准规定了油锯在试验台上进行性能试验和耐久试验的方法，适用于高、短把型式的各类油锯。

Gasoline powered chain saws--Bench test methods

GB/T 5389-1985 链锯 锯链

本标准适用于油锯及手提式电动链锯的锯链。

Chain saws--Saw chain

GB/T 5388-1985 链锯 导板

本标准适用于手提式内燃机链锯及电动链锯的导板。

Chain saw--Guide bar

BS ISO 11839:2021 林业机械 投掷物守卫 测试方法和性能标准

Machinery for forestry. Thrown object guard. Test method and performance criteria

T/SMHMX 01-2023 林区丘陵山地无人机喷雾技术规范

本标准规定了无人机施肥施药喷雾的定义和术语及基本要求、施药作业前准备、施药作业要求、施药作业后效果检查和机具维护等技术措施。

Technical specification for spraying of UAV in forest area

BS ISO 6534:2023 林业机械 便携式链锯护手板 机械强度

Forestry machinery. Portable chain-saw hand-guards. Mechanical strength

ISO 6534:2023 林业机械 便携式链锯护手板 机械强度

This document specifies the mechanical strength requirements relating to the front and rear hand- guards of portable hand-held chain-saws for use primarily in forestry and for tree service. It also gives the corresponding test methods.

Forestry machinery — Portable chain-saw hand-guards — Mechanical strength

ISO/CD TS 19858:2023 林业机械 便携式链锯 评价锯链油润滑性的试验方法

Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil lubricity

ISO 7914:2023 林业机械 便携式链锯 最小手柄间隙和尺寸

This document specifies the minimum clearances and related dimensions for the front and rear handles of portable, hand-held chain-saws.

Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes

ISO/CD 11680:2023 林业机械 便携式杆式动力修枝剪的安全要求和测试

Machinery for forestry — Safety requirements and testing for portable pole mounted powered pruners

BS EN 17822:2023 林业机械 林业运输作业中吊具和偏转滑轮的要求

1   Scope This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications. It is applicable to forestal hauling operations including rope-assisted felling . This document is applicable to the following elements, sling gear and fastening elements: — deflection pulleys used in forestal hauling operation (see 3.22); — choker ropes ; — choker chains ; — radio-controlled chokers ; — shackles ; — round slings / tree protectors ; — tree towing ropes ; —...

Forestry machinery. Requirements for sling gear and deflection pulleys for forestal hauling operations

EN 17822:2023 林业机械 林业运输作业用吊索和偏转滑轮的要求

This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications. It is applicable to forestal hauling operations including rope-assisted felling. This document is applicable to the following elements, sling gear and fastening elements: - deflection pulleys used in forestal hauling operation (see 3.22); - choker ropes; - choker chains; - radio-controlled chokers; - shackles; - round slings/tree protectors; - tree towing ropes; - rope slide hooks/rope sliders/choker hooks. It is not applicable to the following sling gear: - the functional safety of radio-controlled chokers; - non-sheathed tree towing ropes made of synthetic fibres; - slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517:2021 (e.g. for the installation of the haul-back line).

Forestry machinery - Requirements for sling gear and deflection pulleys for forestal hauling operations

BS EN ISO 11850:2011+A2:2022 林业机械 一般安全要求

This document specifies general safety requirements for self-propelled forestry machines and machines configured as forestry machines. It deals with all significant hazards, hazardous situations and events common to fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors, harvesters, mulchers and multi-function versions of these machine types, as defined in ISO 6814:2009, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not deal with hazards specific to individual machines, such as those related to specific attachments, and therefore its use will not alone be sufficient to address all significant hazards for a majority of the machines it covers. It does not deal with hazards related to chain shot, chain breakage on the upper side of the bar, lifting operation, remote control operation, the need for work lights or road safety. For vibration measurement, the test setup and work cycles are not dealt with; nor is the verification method for noise measurement addressed. It is not applicable to hazards related to maintenance or repairs carried out by professional service personnel. The list of significant hazards dealt with is given in Annex A. This International Standard is not applicable to machines manufactured before its date of publication.

Machinery for forestry. General safety requirements

BS EN ISO 11806-2:2022 农林机械 便携式、手持式电动割灌机和割草机的安全要求和测试 与背包式动力装置一起使用的机器

This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack- mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, taken together with the relevant clauses of ISO 11806-1:2022 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. not available at the time of publication. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.

Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Machines for use with backpack power unit

LY/T 3307-2022 以汽油机为动力的手推式割草松土两用机

Gasoline engine powered hand-push grass trimmer/cultivator

LY/T 1669-2022 车载式风送高射程喷雾机

Vehicle mounted high-range sprayers with a fan

22/30446413 DC BS ISO 7914 林业机械 便携式链锯 最小手柄间隙和尺寸

BS ISO 7914. Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes

22/30446416 DC BS ISO 6534 林业机械 便携式链锯护手板 机械强度

BS ISO 6534. Forestry machinery. Portable chain-saw hand-guards. Mechanical strength