65.060.80 林业设备 标准查询与下载

KS B ISO 13772-2020 林业机械 - 便携式链锯 - 非手动致动链制动性能

Forestry machinery — Portable chain-saws —Non-manually actuated chain brake performance

KS B ISO 13772:2020 林业机械 - 便携式链锯 - 非手动致动链制动性能

Forestry machinery — Portable chain-saws —Non-manually actuated chain brake performance

ABNT NBR ISO 13861:2020 林业机械 - 轮式集材机 - 术语，定义和商业规范

Machinery for forestry - Wheeled skidders - Terms, definitions and commercial specifications

ABNT NBR ISO 13862:2020 林业机械 - 伐木机（伐木归堆机) - 术语、定义和商业规范

Machinery for forestry - Feller-bunchers - Terms, definitions and commercial specifications

BS ISO 21876:2020 林业机械 锯链射击防护窗 测试方法和性能标准

What is ISO 21876 about?   ISO 21876 discusses machinery for forestry. ISO 21876 specifies a test method and corresponding performance requirements for saw chain shot protective windows on forestry machines equipped with a chain saw for cutting, harvesting or processing as defined in ISO 6814 .   ISO 21876 also applies to machines that have been modified to perform cutting, harvesting or processing (such as excavator) with a chain saw cutting attachment.   Who is ISO 21876 for? ISO 21876 on pe...

Machinery for forestry. Saw chain shot protective windows. Test method and performance criteria

ISO 21876:2020 林业机械 - 锯链防护窗 - 试验方法和性能标准

This document specifies a test method and corresponding performance requirements for saw chain shot protective windows on forestry machines equipped with a chain saw for cutting, harvesting or processing as defined in ISO 6814. It also applies to machines that have been modified to perform cutting, harvesting or processing (such as excavator) with a chain saw cutting attachment.

Machinery for forestry — Saw chain shot protective windows — Test method and performance criteria

BS ISO 6533:2020 林业机械 便携式链锯前护手板 尺寸和间隙

What is ISO 6533 about?    ISO 6533 discusses forestry machinery. ISO 6533 specifies the dimensions and clearances for front handguards and their openings on portable hand-held chain-saws. These dimensions and clearances ensure the necessary safety provided by the hand-guard, which serves as both a shield between the operator’s hand and the saw chain and as an actuator for manually operated chain brakes.   Note: For chain-saws with wrap around handles, ISO 6533 is not applicable to the portion of the front handle to the right (when viewed from the rear) of the top brace.  Who is ISO 6533 for?   ISO 6533 on Dimensions and clearances for portable chain-saw front hand-guard is useful for:   Chainsaw manufacturers  

Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances

20/30395094 DC BS EN ISO 11806-1 农林机械 便携式、手持式、动力割草机和割草机的安全要求和测试 第 1 部分：配备整体内燃机的机器

BS EN ISO 11806-1. Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1. Machines fitted with an integral combustion engine

ISO 6533:2020 林业机械 - 便携式链锯前卫 - 尺寸和间隙

This document specifies the dimensions and clearances for front hand-guards and their openings on portable hand-held chain-saws. These dimensions and clearances ensure the necessary safety provided by the hand-guard, which serves as both a shield between the operator’s hand and the saw-chain and as an actuator for manually operated chain brakes. For chain-saws with wrap around handles (see Figure 1), this document is not applicable to the portion of the front handle to the right (when viewed from the rear) of the top brace. Key 1 top brace 2 front handle 3 rear handle Figure 1 — Example of a chain-saw with a wrap around the handle — Rear view

Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances

BS ISO 10726:2020 便携式链锯 链捕手 尺寸和机械强度

What is ISO 10726 about?   ISO 10726 is a standard that serves technical specifications for dimensions and mechanical strength of portable chainsaws, specifically chain catchers. ISO 10726 specifies the mechanical strength and dimension requirements, and the corresponding test method for the chain catcher of chainsaws.   ISO 10726 test temperature operates within a range of –25 °C ± 3 °C, unless the chain catcher, its fastenings and the saw body are of metal, in which case the test may be conducted at room temperature.   Who is ISO 10726 for?   ISO 10726

Portable chain-saws. Chain catcher. Dimensions and mechanical strength

T/CNFMA B011-2020 林火防扑机械 以汽油机为动力的背负式风水两用灭火机

本标准规定了以汽油机为动力的背负式风水两用灭火机在符合LY/T 1719-2017的基础上还应满足的技术要求与试验方法以及第三方检验。

Forest fire prevention machinery Backpack type feng shui dual-purpose fire extinguisher powered by gasoline engine

T/CNFMA B013-2020 园林绿化机械 以直流电为动力源的便携式挖树机

本标准规定了以直流电为动力源的便携式挖树机的术语和定义、型号编制方法、基本参数、技术要求与试验方法、第三方检验、标志、使用说明书、包装、运输、贮存和处理。

Landscaping machinery Portable tree digging machine powered by direct current

T/CNFMA B012-2020 园林绿化机械 以汽油机为动力的手扶自走式往复刀剪草机

本标准规定了以汽油机为动力的手扶自走式往复刀剪草机的术语和定义、型号编制、基本参数、技术要求和试验方法、第三方检验、标志、使用说明书、包装、运输和贮存。

Landscaping machinery Gasoline engine-powered hand-held self-propelled reciprocating knife lawnmower

ISO 10726:2020 便携式链锯 - 链式捕手 - 尺寸和机械强度

This document specifies the mechanical s trength and dimension requirements, and the corresponding test method for the chain catcher of chain-saws .

Portable chain-saws — Chain catcher — Dimensions and mechanical strength

BS ISO 13772:2018+A1:2020 林业机械 便携式链锯 非手动链制动性能

1   Scope This document specifies a method for checking the functioning and performance of the non-manually actuated chain brake on an electric or gasoline engine powered, portable hand-held chain-saw.

Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance

ISO 13772:2018/Amd 1:2020 林业机械.便携式链锯.非手动链式制动器性能.修改件1

Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance — Amendment 1

EN 13525:2020 林业机械.木材切削机的安全性

This document specifies safety requirements and their verification for design and construction of, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping. This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components or by separate integrated infeed components such as rollers or conveyors integral to the infeed chute. Wood chippers may be powered either by an external power take-off, hydraulics etc. or by an integral power source such as an internal combustion engine. This document does not cover: - requirements relating to national road regulations arising from transport between work sites; - hazards arising from any self-propelled function; - hazards arising from the transmission of power from an external power source - e.g. power take-off drive shafts; - any machines where the infeed chute is fitted with an extension table or an integrated conveyor that is protruding beyond the outermost lower edge of the infeed chute and the Lower Protective Device of the infeed chute; - hazards arising from the engine pull starting of an integral power source; - hazards arising from mechanical loading; - vertical infeed chute chippers; - electromagnetic aspects of the chippers; - shredders/chippers to be covered by EN 13683; - any machines that are only loaded mechanically; - additional mechanical discharge systems for woodchips which are not part of the chipping mechanism e.g. conveyors. For machines that can be both manually and mechanically loaded, this document is only covering the safety of the manual loading. NOTE 1 Any additional requirements related to use with both mechanical and manual feed that could affect safe use or which are necessary to maintain the integrity of protective devices are outside the scope of this document. Such additional measures are intended to be determined by risk assessment carried out by the manufacturer. This document deals with all significant hazards, hazardous situations and events relevant to wood chippers, when they are used as intended and under the conditions foreseeable by the manufacturer (see Annex A). In addition, it specifies the type of information to be provided by the manufacturer on the safe use of these machines. It is not applicable to environmental hazards (except noise). NOTE 2 The noise test code described in this standard does not comply with the outdoor noise directive 2000/14/EC. This document is not applicable to wood chippers which are manufactured before the date of publication of this document by CEN.

Forestry machinery - Wood chippers - Safety

20/30363686 DC BS EN ISO 11839 林业机械 操作员外壳中使用的玻璃和面板材料可防止锯齿抛出 测试方法和性能标准

BS EN ISO 11839. Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown sawteeth. Test method and performance criteria

20/30391718 DC BS EN ISO 11680-2 林业机械 杆式动力修枝剪的安全要求和测试 第 2 部分：使用背包式电源的机器

BS EN ISO 11680-2. Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners - Part 2. Machines for use with back-pack power source

20/30391715 DC BS EN ISO 11680-1 林业机械 杆式动力修枝剪的安全要求和测试 第 1 部分：配备一体式内燃机的机器

BS EN ISO 11680-1. Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners - Part 1. Machines fitted with an integral combustion engine