65.060.80 林业设备 标准查询与下载

22/30446413 DC BS ISO 7914 林业机械 便携式链锯 最小手柄间隙和尺寸

BS ISO 7914. Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes

BS EN ISO 11681-2:2022 林业机械 便携式链锯安全要求和测试 树木服务用链锯

1   Scope This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty). The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document. Figure 1 — Example of chain-saw Key ...

Machinery for forestry. Portable chain-saw safety requirements and testing - Chain-saws for tree service

BS EN ISO 11806-1:2022 农林机械 便携式、手持式、电动割灌机和割草机的安全要求和测试 配备一体式内燃机的机器

1   Scope This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines ) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines , as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades. NOTE See Annex C for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.

Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers. Machines fitted with an integral combustion engine

T/ZS 0290-2022 "领跑者"标准评价要求 便携手持式油锯

前 言  1 范围   2 规范性引用文件  3 术语和定义   4 评价指标体系     4.1 基本要求    4.2 评价指标分类    4.3 评价指标体系框架  5 评价方法 

Assessment requirements for forerunner standard — Portable hand-held chain-saws

KS B ISO 11806-2-2022 农业和林业机械 便携式、手持式电动割灌机和割草机的安全要求和测试 第2部分：使用背负式动力装置的机器

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit

KS B ISO 8082-1-2022 林业自行式机械 防翻滚结构实验室试验和性能要求 第1部分：通用机械

Self-propelled machinery for forestry — Laboratory tests and performance requirements for roll-over protective structures —Part 1: General machines

BS EN ISO 11681-1:2022 林业机械 便携式链锯安全要求和测试 林业用链锯

1   Scope This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm 3 , relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document. Figure 1 — Example of chain-saw Key

Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for forest service

EN ISO 11850:2011/A2:2022 林业机械.通用安全要求 包含修改件A2,2022

Machinery for forestry - General safety requirements - Amendment 2: Access to operator's station and maintenance locations (ISO 11850:2011/Amd 2:2022)

EN ISO 11681-1:2022 林业机械 便携式链锯的安全要求和试验 第1部分:林业专用链锯

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to chain-saws manufactured after its date of publication.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022)

EN ISO 11681-2:2022 林业机械.便携式链锯的安全要求和测试.第2部分:林木保养用链锯

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty). The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)

BS EN ISO 19472-2:2022 林业机械 绞车 牵引辅助绞车

1   Scope This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill ( pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine . In addition, this document defines requirements for the assembly of supported machine and traction aid winch . It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements...

Machinery for forestry. Winches - Traction aid winches

BS ISO 8082-1:2009+A1:2021 用于林业的自行式机械 防翻滚结构的实验室试验和性能要求 通用机械

What is ISO 8082-1 - Tests and performance requirements for roll-over protective structures about? ISO 8082-1 is the first part of the ISO 8082 multi-series regarding self-propelled machinery for forestry. ISO 8082-1 establishes a consistent, reproducible means of evaluating the force-deflection characteristics of roll-over protective structures (ROPS) on self-propelled forestry machines under static loading, and prescribes performance requirements for a representative specimen under such loading. ISO 8082-1 is applicable to forwarders, skidders, feller-bunchers, processors, harvesters and log loaders, as defined in ISO 6814 . Note: ISO 8082-1 is not applicable to machines having a rotating platform with a cab and boom on the platform, which are addressed by ISO 8082-2 . Who is ISO 8082-1 - Tests and performance requirements for roll-over protective structures for ?

Self-propelled machinery for forestry. Laboratory tests and performance requirements for rollover protective structures - General machines

EN ISO 11806-1:2022 农林机械.内燃机驱动的便携手持式灌木铲除机和割草机的安全性要求.装配有整体内燃机的机械

This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades. NOTE See Annex C for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)

ISO 11681-1:2022 林业机械.便携式链锯的安全要求和试验.第1部分:林业用链锯

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain- saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document. Key 1 rear hand-guard 7 spiked bumper 2 rear handle 8 guide-bar cover 3 throttle trigger 9 guide-bar 4 throttle trigger lock-out 10 saw-chain 5 front handle 11 chain catcher 6 front hand-guard Figure 1 — Example of chain-saw 1

Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service

ISO 11681-2:2022 林业机械.便携式链锯的安全要求和试验.第2部分:树木用链锯

This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty). The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document. 1 Key 1 rear handle 7 guide bar 2 throttle trigger lock-out 8 spiked bumper 3 throttle trigger 9 chain catcher 4 front handle 10 stopping device 5 front handguard 11 attachment point 6 guide bar cover 12 saw-chain Figure 1 — Example of chain-saw

Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service

EN ISO 11806-2:2022 农业和林业机械.便携式动力割灌机和割草机的安全要求和试验.第2部分:使用背负式动力装置的机械

This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication. NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)

EN ISO 19472-2:2022 林业机械绞车第2部分:牵引辅助绞车

This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011. This document is not applicable to traction aid winches manufactured before the date of its publication.

Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)

ISO 11850:2011/Amd 2:2022 林业机械.一般安全要求.修改件2:进入操作员站和维护位置

Machinery for forestry — General safety requirements — Amendment 2: Access to operator's station and maintenance locations

ISO 11806-1:2022 农业和林业机械.便携式手持式动力割草机和割草机的安全要求和试验.第1部分:装有整体式内燃机的机器

This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades. NOTE See Annex C for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine

ISO 11806-2:2022 农业和林业机械.便携式手持式动力割草机和割草机的安全要求和试验.第2部分:背包动力装置用机器

This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack- mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication. NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with backpack power unit