共找到 409 条与 酸 相关的标准,共 28 页
本标准规定了工业硼酸中硫酸盐含量的测定方法目视比浊法。
Boric acid for industrial use--Determination of sulphate content by visual turbidimetry
本标准规定了工业硼酸中氯化物含量的测定方法。
Boric acid for industrial use--Determination of chloride content
本标准规定了工业硼酸中氨含量的测定方法。
Boric acid for industrial use--Determination of ammonia content
本标准规定了用透视法测定工业硫酸的透明度。 本标准只适用于工业用硫酸中的特种硫酸和浓硫酸。
Sulphuric acid for industrial use--Determination of transparency
本标准规定了用双硫腙光度法测定工业硫酸中的铅含量。 本标准适用于工业硫酸中铅(pb)含量大于0.0001%的测定。
Sulphuric acid for industrial use--Determination of lead content--Dithizone photometric method
本标准规定了用原子吸收分光光度法测定工业硫酸中的铅含量。 本标准适用于工业用硫酸试样中含铅量不超过200ug的测定。
Sulphuric acid for industrial use--Determination of lead content--Atomic absorption spectroscopy
本标准规定了用滴定法测定工业硫酸中的硫酸含量和计算发烟硫酸中的游离三氧化硫含量。 本标准适用于工业用硫酸。
Sulphuric acid for industrial use--Determination of sulphuric acid content and calculation of free sulphur trioxide content of oleum--Titrimetric method
本标准规定了用电位滴定法测定工业硫酸中的氯含量。 本标准适用于工业硫酸中氯含量等于或大于0.0003%的测定。
Sulphuric acid for industrial use--Determination of chlorine content--Potentiometric method
本标准规定了用无火焰原子吸收分光光度法测定工业硫酸中的汞含量。 本标准适用于工业硫酸中汞含量大于0.000002%的测定。
Sulphuric acid for industrial use--Determination of mercury content--Flameless atomic absorption spectremetric method
本标准规定了用邻菲啰啉分光光度法测定工业硫酸中的铁含量。 本标准适用于工业硫酸中含铁量大于0.0001%(m/m)的测定。
Sulphuric acid for industrial use--Determination of iron content--O-Phenanthroline spectrophotometric method
本标准规定了用双硫腙光度法测定工业硫酸中的汞含量。 本标准适用于工业硫酸中汞含量大于0.000005%的测定。
Sulphuric acid for industrial use--Determination of mercury content--Dithizone photometric method
本标准规定了用2,4-二甲苯酚分光光度法测定工业硫酸中的氮氧化物。 本标准适用于工业硫酸中氮氧化物〔以氮(N)计〕含量等于或大于0.00002%(m/m)的测定。
Sulphuric acid for industrial use--Determination of oxides of nitrogen-2.4-xylenol spectrophotometric method
本标准规定了用目视比色法测定工业硫酸的色度。 本标准适用于工业用硫酸。
Sulphuric acid for industrial use--Determination of colourity
本标准规定了用重量法测定工业硫酸中的灰分。 本标准适用于工业用硫酸。
Sulphuric acid for industrial use--Determination of ash--Gravimetric method
本标准规定了用原子吸收分光光度法测定工业硫酸中的铁含量。 本标准适用于工业硫酸试样中含铁量不超过400ug的测定。
Sulphuric acid for industrial use--Determination of iron content--Atomic absorption spectroscopy
本标准规定了用二乙基二硫代氨基甲酸银光度法测定工业硫酸中的砷含量。 本标准适用于工业硫酸中砷含量等于或大于0.00001%(m/m)的测定。
Sulphuric acid for industrial use--Determination of arsenic content--Silver diethyldithiocarbamate photometric method
本标准规定了用碘量法测定工业硫酸中的二氧化硫含量。 本标准适用于工业用硫酸。
Sulphyric acid for industrial use--Determination of sulpur dioxide content--Iodometric method
本标准规定了用古蔡法测定工业硫酸中的砷含量。 本标准适用于工业硫酸中砷含量等于或大于0.00001%(m/m)的测定。
Sulphuric acid for industrial use--Determination of arsenic content--Gutzeit method
项 目 要 求 外观 浅黄色至棕色液体 硫酸(H2SO4),ω/% ≥ 20.0 酸不溶物,ω/% ≤ 0.2 全铁(TFe),ω/% ≥ 3.0 钛(Ti),ω/% ≤ 0.3 砷(As),ω/% ≤ 0.001 铅(Pb),ω/% ≤ 0.002 汞(Hg),ω/% ≤ 0.0001 镉(Cd),ω/% ≤ 0.0005 铬(Cr),ω/% ≤ 0.005 锌(Zn),ω/% ≤ 0.01 镍(Ni),ω/% ≤ 0.01
Titanium dioxide for water treatment agent by-product sulfuric acid
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号