共找到 160 条与 有机化学 相关的标准,共 11 页
本标准适用于高温煤焦油经分馏所得的产品,如洗油、粗酚、三混甲酚、工业邻甲酚、间对甲酚、工业酚、粗轻吡比啶及由粗轻吡啶分馏所制得的纯吡啶、a-甲基吡啶、β-甲基吡啶、吡啶溶剂等水分的测定。
Coking products--Determination of moisture content--Microcoulomb method
本标准适用于煤沥青经高温干馏所得沥青焦的真比重的测定。
Method for the determination of the true specific gravity of pitch coke
本标准适用于高温煤焦油经加工所得的低温、中温、高温煤沥清灰分的测定。
Method for determination of coal tar pitch ash content
本标准适用于高温煤焦油经加工所得产品,如洗油、木材防腐油、炭黑用原料油、粗蒽、粗轻吡啶、重苯、重质苯、粗酚、三混甲酚、工业二甲酚、工业邻甲酚、间对甲酚、工业酚、煤沥青和固体古马隆等的水分测定。
Method for the determination of water content of coal--Carbonization products
本文件规定了焦化可纺沥青的技术要求、试验方法、检验规则、包装、标志、运输、贮存和质量证明书。本文件适用于煤焦油深度加工所制得的,用于生产高性能沥青基炭纤维及超高功率电极用针状焦、中间相炭微球、高导热泡沫炭、超高比表面积活性炭等的焦化可纺沥青。
Coked spinnable bitumen
本文件规定了气相色谱法测定煤焦油中的联苯、苊、芴含量的试验原理、试剂和材料、仪器和设备、试样、试验步骤、计算方法、精密度、试验报告等内容。本文件适用于炼焦时所生产的煤焦油中联苯、苊、芴含量的测定。
Determination of biphenyl, acenaphthene and fluorene content in coal tar by gas chromatography
本文件规定了焦化轻油中酚含量测定的试剂材料、仪器设备、试验步骤、数据处理、允许差等。 本文件适用于煤焦油蒸馏所制得的焦化轻油中酚含量的测定。
Determination of coked light oil phenol content by gas chromatography
本文件规定了酚重油馏分的技术要求、试验方法、检验规则、包装、标志、运输、贮存、质量证明书和安全注意事项。 本文件适用于煤焦油加工后得到的焦化酚、吡啶、喹啉残留物与重质洗油按一定配比得到酚重油馏分。
Phenol heavy oil fraction
本文件规定了煤沥青软化点测定冷压环球法的仪器设备、取制样、试验步骤、结果计算、允许差和试验报告。 本文件适用于软化点>157℃的煤沥青试样软化点的测定。
Determination of softening point of coking high softening point coal pitch by cold pressing ball and ball method
本文件规定了煤气中粗苯含量的气相色谱法的测定原理、试剂和材料、仪器设备、试验步骤、结果计算、精密度和试验报告。 本文件适用于炼焦生产过程中产生的焦炉煤气中粗苯含量的测定。
Determination of benzene content in coke oven gas by gas chromatography
本文件规定了焦化产品正庚烷不溶物含量测定试剂材料、仪器设备、试验步骤、数据处理、允许差等。 本文件适用于炭黑用焦化原料油、煤焦油、煤沥青等焦化产品中正庚烷不溶物含量的测定。
Determination of n-heptane insoluble matter content of coking products
Specifications for production, processing and technical control of 1-methyl-2-(3-pyridyl)pyrrolidine
Determination of 3,4-benzopyrene content in coal pitch by gas chromatography
This method is for determining total mercury in liquid hydrocarbons using a Nippon Instruments Corporation (NIC) Mercury Analyzer. The lower limit of quantitation is 0.1 ng/mL (m/v-ppb). The results can be converted to mass-ppb. Appendix A contains a procedure, Determination of Mercury Species in Hydrocarbons, which can be used to differentiate between elemental mercury, organic non-ionic mercury and ionic (both inorganic and organic) mercury species. Appendix B contains an alternative procedure for total mercury in liquid hydrocarbons, using different equipment from the same manufacturer with higher sensitivity. Refer to UOP Method 938-10 and earlier versions when using the NIC SP-3D Mercury Analyzer.
Total Mercury and Mercury Species in Liquid Hydrocarbons
4-hydroxy-4ˊ-benzyloxydiphenyl sulfone for thermal magnetic tickets
Determination of Industrial o-cresol Content by Gas Chromatography with Large Bore Capillary Column
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号