71.080.90 酚 标准查询与下载

GB/T 3709-1997 工业酚

本标准规定了工业酚的技术要求、试验方法、检验规则、包装、标志、运输、贮存和安全注意事项。 本标准适用于从煤焦油和含酚废水中制取的粗酚经分馏所得的工业酚。

Technical phenol

GB/T 2600-1997 工业二甲酚

本标准规定了工业二甲酚的技术要求、试验方法、检验规则、标志、包装、运输、贮存与安全注意事项。 本标准适用于从煤焦油、含酚分废水制取的粗本分经分馏所得的二甲酚。

Technical xylenol

GB/T 1646-1994 2-萘酚

2-Naphthol

GB/T 2279-1989 邻甲酚

本标准规定了邻甲酚的技术要求、试验方法、检验规则、包装、标志、质量证明书。 本标准适用于从煤焦油、含酚污水制取的粗酚、经精馏所得的邻甲酚。

o-Cresol

GB/T 3711-1983 酚类产品中性油及吡啶碱含量测定方法

本标准适用于从煤焦油、含酚污水制取的粗酚，经分馏所得的苯酚、工业酚、三混甲酚、间对甲酚和工业二甲酚中的中性油及吡啶碱含量的测定。

Method of determination for neutral oils and pyridine bases contents of phenol products

GB/T 3710-1983 工业酚,苯酚结晶点测定方法

本标准适用于高温煤焦油的粗酚，经分馏所制得的工业酚、苯酚结晶点的测定。

Method of determination for crystallizing point of technical phenol and phenic acid

GB/T 2601-1981 酚类产品组成的气相色谱测定方法

本标准适用于焦化产品的三混甲酚、间对甲酚中苯酚、邻甲酚、间甲酚和对甲酚等组分的测定。

Products from phenols--Determination of composition--Gas chromatography

GB/T 2604-1981 邻甲酚组成的气相色谱测定方法

本标准适用于从煤焦油、含酚污水制取的邻甲酚的组成分析。

o-Cresol--Determination of composition--Gas chromatography

T/CSRA 22-2023 聚碳酸酯回收双酚A

本文件规定了聚碳酸醋回收双酚 A 的要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于界面缩聚法聚碳酸生产过程中回收的双酚 A产品。

Bisphenol A as recycled-content product from polycarbonate resin production

T/QGCML 412-2022 2,3,5-三甲基苯酚生产技术规范

本文件规定了2,3,5-三甲基苯酚生产技术规范的术语和定义、基本要求、加工工艺流程、成品检验、标志、包装、运输及贮存。 本文件适用于2,3,5-三甲基苯酚生产全过程。

Technical specification for the production of 2,3,5-trimethylphenol

T/SDHCIA 023-2022 过氧化氢异丙苯制环氧丙烷（POCHP）装置副产品 苯酚

本文件规定了过氧化氢异丙苯制环氧丙烷（POCHP）装置副产品 苯酚（以下简称“副产苯酚”）的要求、试验方法、检验规则、标志、标签和随行文件和包装、运输和贮存。 本文件适用于过氧化氢异丙苯制环氧丙烷（POCHP）装置副产品苯酚。

Hydrogen peroxide isopropylbenzene propylene oxide plant by-product—phenol

T/FSI 084-2022 双酚AF

本文件规定了双酚AF的技术要求、试验方法、检验规则、标志、包装、运输、贮存和安全。 本文件适用于苯酚和六氟丙酮三水化合物反应生成的双酚AF化合物。 化学名称：2，2-双(对羟基苯基)六氟丙烷 分子式：C15H10F6O2 相对分子量：336.23（按2019年国际相对原子质量） CAS号：1478-61-1

Bisphenol AF

T/CPCIF 0190-2022 重烷基酚

项　　目　指　　标 　Ⅰ　型　Ⅱ　型 外观　浅黄色至深黄色油状液体　深黄色油状液体 重烷基酚含量，w/%　　　　　　　　　≥　90　95 2,6-二叔丁基对甲酚含量，w/%　　　　 ≥　50　40 水分/%　　　　　　　　　　　　　　 ≤　1.0　1.0 密度（20 ℃）/（g/cm3）　0.91～0.98　0.91～0.98

Heavy alkylphenol

T/CPCIF 0139-2021 粗制腰果酚

项    目　要    求 腰果酚含量/%　≥　60.0 灰分/%　≤　1.0 水分/%　≤　1.0 酸值/（mgKOH/g）　≤　20.0 黏度（25 ℃）/（mPa?s）　　100～300 密度（25 ℃）/（kg/L）　　0.920～0.980 碘值/（gI/100g）　　200～300

Crude cardanol

HG/T 5793-2021 工业用对异丙基苯硫酚

Industrial p-isopropylthiophenol

KS M 1671-2020 五氯苯酚

Pentachlorophenol

ASTM D4789-20e1 双酚A（4,4-异丙基二苯酚）溶液颜色的标准试验方法

1.1 This test method covers the procedure for determination of the Platinum-Cobalt Color of bisphenol A (4,4'Isopropylidenediphenol) dissolved in methanol. 1.2 This test method has been found applicable for the determination of solution color of bisphenol A to 20 Pt–Co color units. 1.3 The following applies for the purposes of determining the conformance of the test results using this test method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)

ASTM D4789-20 双酚A（4,4-异丙基二苯酚）溶液颜色的标准试验方法

Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)

ASTM D4493-20 双酚A凝固点的标准试验方法

1.1 This test method describes the procedure for determination of the solidification point of bisphenol A (4,4'isopropylidene diphenol). 1.2 The test method has been found applicable for determination of the solidification point between 150 and 157°C. 1.3 In determining conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 Warning—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol)

ASTM D2439-20 精制苯酚的标准规范

1.1 This specification covers refined phenol. 1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 Consult current OSHA regulations and supplier’s Safety Data Sheets, and local regulations for all materials listed in this specification. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Refined Phenol