共找到 1043 条与 铝生产用材料 相关的标准,共 70 页
本文件适用于以氢氧化铝和纯度99.9 %以上的无水氟化氢为原料生产的氟化铝。
Anhydrous aluminum fluoride
Determination of softening point of pitches-Mettler softening point method
Determination of quinoline-insoluble(QI) material of pitch
Labelling of chemicals based on GHS
本文件规定了铝电解用预焙阳极的生产技术要求、产品质量要求、试验方法、检验规则、包装、存 储、运输内容等。
Technical specification for the production of prebaked anodes for aluminum electrolysis
本文件规定了测定石油焦黏结指数的原理、材料、仪器设备、样品的制备、步骤、结果计算、精密度和试验报告。 本文件适用于石油焦黏结指数的测定。
Method for determination of caking index of petroleum coke
What is ISO 4443 - Determination of cryolite about? Cryolite is an uncommon mineral used in the electrolytic processing of aluminium-rich oxide ore bauxite. ISO 4443 specifies a wavelength-dispersive X-ray fluorescence spectrometric (XRF) method for the determination of cryolite (Na3AlF6) from the content of fluorine to the content of trace elements. The calibration reference materials are not specified in this method. ISO 4443 is applicable to cryolite, which is primarily used for the production of aluminium. ISO 4443 provides conversion factors for converting elements to compounds. The validity and precision of test results for concentrations outside these ranges have not been determined.
Cryolite primarily used for the production of aluminium. Determination of elements. Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
This document specifies a wavelength-dispersive X-ray fluorescence spectrometric (XRF) method for the determination of cryolite (Na3AlF6) from the content of fluorine to the content of trace elements. The calibration reference materials are not specified in this method. The method is applicable to cryolite, which is primarily used for the production of aluminium. Annex A provides conversion factors for converting elements to compounds. The validity and precision of test results for concentrations outside these ranges has not been determined. The concentration range of fluorine (given as F) is from 510 g/kg to 560 g/kg. The concentration range of aluminium (given as Al) is from 120 g/kg to 150 g/kg. The concentration range of sodium (given as Na) is from 270 g/kg to 330 g/kg. The concentration range of silicon (given as SiO2) is from the lowest limit of detection (LLD) to 4,0 g/kg. The concentration range of iron (given as Fe2O3) is from LLD to 0,37 g/kg. The concentration range of sulfur (given asISO 4) is from LLD to 5,0 g/kg. The concentration range of phosphorus (given as P2O5) is from LLD to 0,40 g/kg. The concentration range of calcium (given as CaO) is from LLD to 0,80 g/kg.
Cryolite primarily used for the production of aluminium — Determination of elements — Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
Carbonaceous products for the production of aluminium —Baked anodes and shaped carbon products —Determination of the coefficient of linear thermal expansion
Carbonaceous products for the production of aluminium —Baked anodes and shaped carbon products —Determination of the coefficient of linear thermal expansion
1.1 This test method covers the determination of the apparent density of core samples from manufactured articles of anode and cathode carbon used by the aluminum industry in the production of aluminum. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
Carbonaceous materials for the production of aluminium-Cathode blocks and baked anodes-Determination of compressive strength
Aqueous hydrofluoric acid for industrial use-Sampling and methods of test
Carbonaceous materials for the production of aluminium-Baked anodes-Determination of the air permeability
Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
Aluminium oxide used for the production of aluminium-Determination of particles passing a 20 micrometer aperture sieve
Testing methods for media of biofilter
Carbonaceous materials used in the production of aluminium-Determination of baking level expressed by equivalent temperature
Carbonaceous materials for the production of aluminium-Petroleum coke-Determination of trace metals by inductively coupled plasma atomic emission spectrometry
Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 2:Determination of flexural strength by the foru-point method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号