71.120.01 化工设备综合 标准查询与下载

DB44/T 1979-2017 供暖空调系统水处理技术规程

本标准规定了以市政水、地表水、地下水和非传统水源水作为补充水源的，集中空调循环水系统、水温不超过95℃的集中供暖循环热水系统的补充水与循环水以及作为冷却水源的水源热泵直流冷却水系统的水处理技术要求。 本标准适用于新建、扩建、改建的工业与民用建筑工程的供暖空调系统水处理设计、施工和运营管理。

Technical specification for water treatment of heating and air conditioning system

DIN 28017-1:2014 处理装置的固定接近.第1部分:平台

Stationary accesses to process apparatus - Part 1: Platforms

KS L 7103-2013 工业搪玻璃器具和设备试验方法

Test method of glass-lined apparatus and equipment for industry

KS L 1553-2013(2023) 化工耐酸瓷试验方法

Testing method of acid proof porcelain for chemical industry

KS L 1553-2013(2018) 耐酸瓷材料化工行业用测试方法

Testing method of acid proof porcelain for chemical industry

ASTM G157-98(2013) 化学工业行业锻铁和镍基耐腐蚀合金腐蚀性能评价指标

1.1 This guide covers an evaluation approach that is designed to provide information on the corrosion properties of wrought ironand nickel-based alloys for the chemical process industries. This guide incorporates test conditions for general corrosion measurements in a variety of environments, crevice corrosion resistance in chloride environments, and stress corrosion cracking resistance in chloride environments. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

GOST R 55601-2013 热交换装置和空气冷却装置. 管板胀管. 通用技术要求

Heat exchanger apparatuses and air cooling apparatuses.Tube expanding in tube-sheets. General technical requirements

GOST R 55597-2013 高压容器和装置. 强度计算规范和方法. 外壳和头部遭受外压时的开口补强. 喷嘴遭受外部静态荷载时的强度计算

High pressure vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openinys in shells and heads external pressure. Strength calculation under external static loads on the nozzle

GOST R 55600-2013 压力为100至320 MPa的管材和管道部件. 强度计算规范和方法

Pipes and pipeline components for pressure over 100 to 320 MPa. Norms and methods of strength calculation

DIN 28017-4:2012 处理装置的固定使用.第4部分:抗非故意下降的安全设备

Stationary accesses to process apparatus - Part 4: Safety devices against unintentional descent

DIN 28017-2:2012 处理装置的固定使用.第2部分:平台的围栏

Stationery accesses to process apparatus - Part 2: Railings for platforms

DIN 28017-1:2012 处理装置的固定接近.第1部分:平台

Stationary accesses to process apparatus - Part 1: Platforms

GOST R 54522-2011 高压力容器和设备.强度计算的标准和方法.圆柱状的壳体、头、法兰、盖子的计算.设计建议

High pressure vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric shells, heads, flanges, covers. Design recommendations

GOST R 52630-2012 钢材焊接容器和装置.通用规格

Steel welded vessels and apparatus. General specifications

GOST R 54803-2011 高压焊接钢制容器. 通用技术要求

High-pressure welded steel vessels. General technical requirements

ASTM E2629-11 过程解析技术(PAT)控制系统验证标准指南

This guide supports the principles of Guide E2500 and extends these principles to the verification of PAT-enabled control systems. This guide clarifies what is important for verification of PAT-enabled control systems. Such systems are often complex and require multidisciplinary and cross-functional teams to achieve optimum results. This guide provides a common basis for understanding requirements for all involved disciplines such as control engineering, development, manufacturing, and process validation.1.1 This guide describes the verification of process analytical technology (PAT) enabled control systems using a science- and risk-based approach. It establishes principles for determining the scope and extent of verification activities necessary to ensure that the PAT-enabled control system is fit for purpose, properly implemented, and functions as expected. 1.2 In this guide, a PAT-enabled control system is considered to be the system that adjusts the manufacturing process using timely measurements (that is, during processing) of attributes of raw and in-process materials to determine responses that assure the process remains within specified boundaries and minimizes variability in the output material. The overall aim of the PAT-enabled control system is to ensure product quality. The PAT-enabled control system of a manufacturing process provides the capability to determine the current status of the process and drive the process to ensure the output material has the desired quality characteristics. The control system should be able to respond to process variations in a timely manner, providing corrections that ensure that the process follows the desired process trajectory to reach the desired outcome. PAT-enabled control systems may use process models based on first principles understanding or empirical models derived from experimental investigations or both. In addition to automated controls, a PAT-enabled control system may include components where there is manual intervention. 1.3 Principles described in this guide may be applied regardless of the complexity or scale of the PAT-enabled control system or whether applied to batch or continuous processing, or both. 1.4 The principles described in this guide are applicable to a PAT-enabled control system and also to its component subsystems. This guide does not cover the requirements for continuous quality verification of the overall process, which are covered in Guide E2537. 1.5 For information on science- and risk-based approaches in the pharmaceutical industry, reference should be made to ICH Q8(R2), ICH Q9, and ICH Q10. For guidance on PAT systems in the pharmaceutical industry, reference should be made to FDA Guidance for IndustryPAT and FDA Guidance for IndustryProcess Validation. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

DB14/T 593-2010 太原市绿色焦化企业技术要求

本标准规定了太原市绿色焦化企业的术语和定义、要求、实施、评价与改进。 本标准适用于太原市行政区域内的焦化企业。本省其他行政区域可以参照执行

Technical requirements for green coking enterprises in Taiyuan

KS L 1581-2010(2020) 耐酸陶器化工行业用包装

Packing of acid proof pottery for chemical industry

HG/T 2806-2009 奥氏体不锈钢压力容器制造管理细则

本标准规定了奥氏体不锈钢及复层为奥氏体不锈钢制压力容器及零部件制造与管理的基本要求。 本标准适用于不锈钢压力容器及零部件的制造与管理。 非奥氏体或衬里为非奥氏体不锈钢压力容器及零部件、常压不锈钢容器及零部件的制造与管理亦可参照采用本标准。

Detailed management rules for manufacturing of austenitic stainless steel pressure vessels

HG/T 4079-2009 金属抛光表面质量检测及评判规则

本标准规定了金属抛光表面检测的一般要求、抛光表面的检验及评判规则 、抛光表面保护等要求。 本标准适用于钢制容器内表面和内件外表面抛光检测，如聚氯乙烯合釜、聚醚釜、橡胶釜等搅拌设备及与其配套的换热器等设备表面的抛光检测。其他类似设备表面的抛光检测亦可参照执行本标准。

Metal surface polishing inspecting procedure and rule