73.120 矿产加工设备 标准查询与下载

ISO 4077:2023 煤炭 选煤厂取样指南

This document specifies recommended practices for sampling in coal preparation plants (CPPs). The document is applicable to sampling of all coal product(s), reject material(s) and magnetite. The coal and mineral matter size covered by this document ranges from a nominal top size of 63 mm to 0,1 mm. This document also covers larger sizes in the case of mechanical sampling. Manual sampling is not recommended for particle size larger than 63 mm.

Coal — Guidance for sampling in coal preparation plants

T/GXAS 425-2022 非金属矿摆式磨粉机

本文件规定了摆式磨粉机的结构型式、产品型号、基本参数、生产能力、技术要求、标志、随行文件、包装、运输和贮存等要求，描述了相应的试验方法、检验规则。  本文件适用于粉磨方解石、大理石、石膏、石灰石、重晶石、萤石、滑石、硅灰石、高岭土、长石、石英石等莫氏硬度不大于7级，湿度在6％以下的矿产物料的摆式磨粉机。 

Pendulum mill for non-metallic mine

T/GXAS 424-2022 锰矿粉立式辊磨机

本文件规定了锰矿粉立式辊磨机的型式、产品型号、基本参数、技术要求、标志、随行文件、包装、运输和贮存等要求，描述了相应的试验方法、检验规则。  本文件适用于粉磨锰矿的立式辊磨机。

Vertical roller mill for manganese mineral powder

T/CFA 020102048-2022 自磨机和半自磨机铸造衬板技术条件

本文件规定了自磨机和半自磨机铸造衬板的术语和定义、牌号和代号、技术要求、试验方法、检验规则、标志、合格证、包装、运输和贮存。 本文件适用于冶金矿山等行业的自磨机和半自磨机铸造衬板（以下简称衬板）。其他行业自磨机和半自磨机铸造衬板可参照执行。

Autogenous mill and semi autogenous millTechnical conditions for casting lining plate

BS ISO 923:2022 煤炭 煤炭密度分离设备 绩效评估

Coal. Density separation equipment for coal. Performance evaluation

ISO 923:2022 煤.煤的密度分离设备.性能评估

This document describes the principles and methods for evaluating the performance of density separation equipment used for coal cleaning operations . Testing and sampling procedures are specified, and methods of presenting test results are detailed. Performance parameters are recommended and defined, and their determination is formulated, thereby permitting their use in evaluating, comparing and predicting performance levels of coal cleaning operations. This document is applicable to the following types of coal cleaning equipment using relative density (RD) as the main characteris tic for separation: a) dense-medium separators; b) j igs; c) other density-based separators, including spiral separator, hindered settling cleaners, shaking table, water-only cyclone, etc.

Coal — Density separation equipment for coal — Performance evaluation

T/CASME 85-2022 尾矿废石建筑垃圾回收利用生产技术条件

本文件规定了尾矿废石建筑垃圾回收利用生产的术语和定义、一般规定、开采和加工、质量控制、 储存、综合利用和环境保护。

Production technical conditions for recycling and utilization of tailings waste rock construction waste

JB/T 11097.1-2022 立式自动压滤机 第1部分：主机

Vertical automatic filter press part 1: main machine

JB/T 14228-2022 螺旋紊流水分离器

Spiral turbulent water separator

JB/T 14229-2022 振动卸料离心机

Vibrating discharge centrifuge

JB/T 14227-2022 流砂过滤器

quicksand filter

JB/T 11097.2-2022 立式自动压滤机 第2部分：滤板

Vertical automatic filter press part 2: filter plate

JB/T 8103.5-2022 碟式分离机 第5部分：淀粉分离机

Disc Separator Part 5: Starch Separator

T/JAS 05-2022 风扇磨煤机

1、规定了FM型风扇磨煤机主要技术性能参数和FMH褐煤型风扇磨煤机主要技术性能参数。 2、规定了FM型风扇磨煤机和FMH褐煤型风扇磨煤机的技术要求。 3、规定了FM型风扇磨煤机和FMH褐煤型风扇磨煤机试验方法、检验规则、包装运输等。

Beater wheel mill

BS EN 15163-2:2022 用于天然石材开采和加工的机器和设备 安全 移动式金刚石绳锯的要求

1   Scope This document deals with all significant hazards, hazardous situations and events which are relevant to transportable diamond wire saws , used in quarries for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). For this document, the intended use of machine is limited by the following cutting operations , defined in Clause 3: 1) vertical cut (see 3.16); a) mountain vertical cut (see 3.16.1); b) mountain side vertical cut (see 3.16.2); c) block vertical cut (see 3.16.3); d) overhead underslung vertical cut (see 3.16.4); ...

Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for transportable diamond wire saws

BS EN 15163-1:2022 用于天然石材开采和加工的机器和设备 安全 固定式金刚石线锯的要求

1   Scope This document deals with all significant hazards, hazardous situations and events as listed in Annex A, which are relevant to stationary diamond wire saws ( stationary diamond mono-wire saws and stationary diamond multi-wire saws ), as defined in Clause 3, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Stationary diamond wire saws can be used in quarries or in sawmill for cutting natural stones, e.g. marble, granite (see Annex A). This document deals only with stationary diamond wire saws using coated diamond wire as tool. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This document deals all significant hazards that could occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping. This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that could be fitted on the machines or that can be used during the work cycle. This document does not apply to: 1) machines intended for operation in a potentially explosive atmosphere; 2...

Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for stationary diamond wire saws

22/30426767 DC BS ISO 5146 选煤厂 用于测量煤密度分离器性能的密度示踪测试

BS ISO 5146. Coal preparation plant. Density tracer testing for measuring performance of coal density separators

KS D 7016-2022 金属丝编织布

Woven wire cloth

EN 15163-1:2022 天然石材开采和加工的机器和装置 安全 第1部分：固定式金刚石线锯的要求

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to stationary diamond wire saws (stationary diamond mono-wire saws and stationary diamond multi-wire saws), as defined in Clause 3. Stationary diamond wire saws may be used in quarries or in sawmill for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document deals only with stationary diamond wire saws using coated diamond wire as tool. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping. This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle. This document does not deal with: a) operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018); b) upstream and downstream conveying elements, not integrated with stationary diamond wire saws, for transporting of the work-pieces. This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws

T/MMAC 008-2022 自动布料机器人

本文件规定了自动布料机器人的术语和定义、分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存、运行与维护。 本文件主要适用于矿山选矿、矿石分拣、物料装载与输送过程中，对散状物料进行分配卸料的场所。

Automatic materials dispensing and unloading robot