共找到 702 条与 黑色金属综合 相关的标准,共 47 页
警告:适用本标准的人员应有正规实验室工作的实践经验。本部分并为指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关法规规定的条件。 GB/T 223的本部分规定了甲醇蒸馏-姜黄素光度法测定硼含量。 本部分适用于碳钢、合金钢、高温合金及精密合金中质量分数为0.0005%~0.20%硼含量的测定。
Iron,steel and alloy.Determination of boron content. Methanol distillation-curcumin photometric method
警告:使用本部分的人员应有正规实验室工作的实践经验。本部分并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关法规规定的条件。 GB/T 223的本部分规定了用管式炉内燃烧后气体容量法测定碳含量。 本部分适用于钢、铁、高温合金和精密合金中质量分数为0.10%~2.00%碳含量的测定。
Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 223的本部分规定了用氢化物发生-原子荧光光谱法测定钢铁及合金中铋和砷含量的方法。 本方法适用于钢铁及镍基合金中铋和砷含量的测定。铋测定质量分数范围:0.000 05%~0.Ol%;砷测定质量分数范围:0.000 05%~0.01%
Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
GB/T 223的本部分规定了用微波消解-电感耦合等离子体质谱法测定钢铁及合金中的总铝和总硼含量 本方法适用于钢铁及合金中总铝和总硼含量的测定,总铝测定质量分数范围:0.000 5%~0.10%;总硼测定质量分数范围:0.000 2%~0.10%
Iron,steel and alloy-Determination of total aluminum and total aluminum and total boron contents-Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223的本部分规定了用X-射线荧光光谱法测定硅、锰、磷、硫、铜、铝、镍、铬、钼、钒、钛、钨和铌的含量 本部分适用于铸铁、生铁、非合金钢、低合金钢,各元素测定范围见表1
Iron and steel-Determination of multi-element contents-X-ray fluorescence spectrometry (Routine method)
GB/T 223的本部分规定了用惰气脉冲熔融热导法测定钢铁中的氢含量的方法。本方法适用于钢铁中质量分数为0.20μg/g~30.0 μg/g氢含量的测定
Steel and iron-Determination of hydrogen content-Inert gas impulse fusion heat conductivity method
本标准规定了惰性气体熔融热导法测定钢铁中的氮。 本方法适用于钢铁中质量分数为0.002%~0.6%的氮含量。
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
本标准规定了用脉冲加热惰气熔融-红外线吸收法测定钢铁中氧含量。 本方法适用于钢铁中质量分数0.0005%~0.020%氧含量的测定。
Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
本标准规定了高频感应炉燃烧后红外吸收法测定钢铁中总碳硫含量的方法。 方法适用于质量分数为0.005%~4.3%的碳含量及0.0005%~0.33%的硫含量的测定。 本方法能适用于常规的生产控制分析工作,并符合公认的实验室认可机构对分析方法的要求,这种方法是被广泛接受的、好的实验室分析方法。本标准采用校准过的商业仪器,并以钢铁有证参考物质验证校准,同时其仪器性能由常规统计过程控制方法(SPC)进行控制。 本方法可采用单元素测定方式,即单独测定碳或硫;或者采用同时测定方式,即同时测定碳和硫。
Steel and iron - Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
本报准规定了生铁、铸铁和钢化学成分测定用试样的取样和制样方法。这些方法分别适用于其液态和固态。
Steel and iron.Sampling and preparation of samples for the determination of chemical composition
本标准规定了废钢铁的术语和定义、分类、技术要求、检验项目和检验方法、验收规则、运输和质量证明书等。本标准适用于炼钢、炼铁、铸造及铁合金冶炼时作为炉料使用的熔炼用废钢铁以及一般用途的非熔炼用废钢铁。
Iron and steel scraps
本标准规定了焦化粘油类产品馏程测定的原理、仪器、试验步骤、结果计算和精密度。 本标准适用于焦化洗油、木材防腐油、炭黑用焦化原料油、蒽油、燃料油等焦化粘油类产品馏程的测定。
Coking viscous oil products-Determination of distillation range
本标准规定了用磷钼蓝分光光度法测定磷量。 本标准适用于锰硅合金中磷量的测定。测定范围:≤0.450%。
Methods for chemical analysis of silicomanganese --The phosphomolybdenum blue phtometric method for the determination of phosphorus content
本标准规定了钢铁及合金产品牌号统一数字代号(简称“ISC”代号)的编制原则、结构、分类、管理及体系表等内容。 本标准适用于钢铁及合金产品牌号编制统一数字代号。凡列入国家标准和行业标准的钢铁及合金产品应同时列入产品牌号和统一数字代号,相互对照,两种表示方法均有效。
Unified numbering system for designations of iron,steel and alloy
Silver—Determination of iron,lead and bismuth contents—Flame atomic absorption spectrometric method
Steel. Determination of oxygen. Infrared absorption method after fusion under inert gas (Routine method)
BS EN ISO 4937 Steel and iron — Determination of chromium content — Potentiometric or visual titration method
本文件规定了全氢罩式退火炉(以下简称罩式炉)尾气回收氢气循环再利用的术语和定义、原理与工艺、技术要求、试验方法、运行与维护。 本文件适用于罩式炉尾气回收氢气循环再利用技术。其他以氢气为保护气氛的热处理炉可参照执行。
Technical Specification for Hydrogen Recycling and Reuse of Exhaust Gas from Full Hydrogen Bell Annealing Furnace
本文件规定了钢铁企业链篦机-回转窑球团工艺烟气脱硝的术语和定义、原理与工艺、技术要求、计算与检测、运行与维护。 本文件适用于新建或改造的链篦机-回转窑球团工艺烟气脱硝项目。
Technical specifications for flue gas denitrification of grate machine-rotary kiln pellet process in steel enterprises
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号