77.120.01 有色金属综合 标准查询与下载

KS D 0052-2019 金属基复合材料中使用的术语表

Glossery of terms used in metal matrix composites

T/CNIA 0035-2019 绿色设计产品评价技术规范 铜精矿

本标准规定了铜精矿绿色设计产品评价的术语和定义、评价要求、生命周期评价报告编制方法以及评价方法和判定依据。 本标准适用于铜精矿绿色设计产品的评价。

Green Design Product Evaluation Technical Specification for Copper Concentrate

ASTM B936-19 铜铬铁钛合金板、薄板、带材和轧制棒材的标准规范

1.1 This specification establishes the requirements for Copper Alloy UNS No. C18080 for plate, sheet, strip, and rolled bar. NOTE 1—Since Copper Alloy UNS No. C18080 is frequently used in a variety of applications where yield strength and stress-corrosion resistance may be critical, it is recommended that drawings or samples of the part to be fabricated and details of application be submitted for use in establishing temper and treatment of material. NOTE 2—Copper Alloy UNS No. C18080 is covered by a patent. Interested parties are invited to submit information regarding the identification of an alternative(s) to this patented item to ASTM International headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee,1 which you may attend. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

DB34/T 3253-2018 铜精矿化学分析方法 氯含量的测定 自动电位滴定法

本标准规定了铜精矿中氯含量的自动电位滴定测定方法。 本标准适用于铜精矿中氯含量测定。测定范围：0.0600％～0.3000％。 注：本标准中测定的氯是指氨性浸出氯。

Methods for chemical analysis of copper concentrates - Determination of chlorine content - Automatic potentiometric titration

YS/T 1293-2018 废旧电路板中有色金属回收技术规范 铜、锌、铅、锡、金、银、钯的回收

Technical Specification for Recycling of Non-ferrous Metals from Waste Circuit Boards Recycling of Copper, Zinc, Lead, Tin, Gold, Silver and Palladium

YS/T 1292-2018 报废汽车中有色金属分选技术规范

Technical specifications for sorting non-ferrous metals from scrapped cars

ASTM B77-07(2018) 电阻合金热电功率的标准测试方法

1.1 This test method covers the determination of the thermoelectric power of a metal or alloy with respect to copper when the temperatures of the junctions lie between 0 and 100°C. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

ASTM B899-18 与有色金属和合金有关的标准术语

Standard Terminology Relating to Non-ferrous Metals and Alloys

ASTM B753-07(2018) 温控元件合金的标准规格

1.1 This specification describes requirements for alloys to be used as components in the manufacture of bonded multicomponent thermostat metal strip. More specifically it describes alloys having composition, and thermal expansion suitable for application in thermostat metal sheet and strip. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Thermostat Component Alloys

ASTM B223-08(2018) 恒温金属弹性模量的标准测试方法（悬臂梁法）

1.1 This test method covers the determination of the modulus of elasticity of thermostat metals at any temperature between −300 and +1000°F (−185 and 540°C) by mounting the specimen as a cantilever beam and measuring the deflection when subjected to a mechanical load. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

T/ACREI CREIS34002-2018 铈及富铈烧结永磁体

本标准规定了铈（ Ce） 及富铈（ Ce） 烧结永磁体的技术要求、 试验方法、 检验规则和标志、 包装、运输、 贮存、 质量证明书。 本标准适用于粉末冶金工艺生产的烧结铈（ Ce） 永磁体。

Cerium and cerium rich sintered permanent magnets

T/ACREI CREIS54001-2018 稀土产品成分分析质量控制技术规范—第一部分·总则

本部分规定了稀土产品成分分析质量控制技术规范的相关术语、基本原则和基本要求。 本部分适用于稀土产品成分分析质量控制。

Specification of quality control for chemical analysis of rare earth products —Part 1：General rules

YS/T 1193-2017 电解用阴极板绝缘密封夹边条

Cathode plate insulation sealing edge strip for electrolysis

T/ACREI CREIS54002-2018 稀土产品成分分析质量控制技术规范—第2部分·单一稀土金属及其氧化物成分分析

本部分规定了单一稀土金属及其氧化物样品化学成分分析质量管理的基本要求。 本部分适用于单一稀土金属及其氧化物样品化学成分分析的质量控制。

Specification of quality control for chemical analysis of rare earth products —Part 2： Chemical analysis of individual rare earth metals and oxides

YS/T 745.2-2016 铜阳极泥化学分析方法 第2部分：金量和银量的测定 火试金重量法

Methods for chemical analysis of copper anode mud Part 2: Determination of gold and silver amounts Fire assay gold gravimetric method

SN/T 4501.1-2016 镍精矿化学分析方法 第1部分：镍、钴、铜、锰、镁、钙元素含量的测定 电感耦合等离子体原子发射光谱法

Methods for chemical analysis of nickel concentrates Part 1: Determination of elemental contents of nickel, cobalt, copper, manganese, magnesium and calcium by inductively coupled plasma atomic emission spectrometry

DB51/T 2111-2016 生态地球化学评价土壤样品中砷、汞的同时测定 氢化物发生—原子荧光光谱法

本标准规定了生态地球化学评价土壤样品中砷、汞的氢化物发生-原子荧光光谱法同时测定方法。 本标准适用于生态地球化学评价土壤样品中砷、汞的氢化物发生-原子荧光光谱法同时测定，其他类型土壤样品中砷、汞的测定可参照执行。 方法检出限为，砷: 0.023μg/g、 汞: 0.0018μg/g。

Simultaneous Determination of Hydride Generation in Ecogeochemical Evaluation of Arsenic and Mercury in Soil Samples—Atomic Fluorescence Spectrometry

DB51/T 2113-2016 生态地球化学评价土壤样品中铬、铜、镉、铅的测定 电感耦合等离子体质谱法

本标准规定了生态地球化学评价土壤样品中铬、铜、镉、铅的电感耦合等离子体质谱测定方法。 本标准适用于生态地球化学评价土壤样品中铬、铜、镉、铅的电感耦合等离子体质谱测定，其他类型土壤样品铬、铜、镉、铅的测定可参照执行。 方法检出限及测定下限见附录A。

Determination of chromium, copper, cadmium and lead in soil samples for ecological geochemical evaluation by inductively coupled plasma mass spectrometry

DB51/T 2114-2016 地球化学样品中铂、钯的测定电感耦合等离子体质谱法

本标准规定了地球化学样品中铂、钯的小铅试金-电感耦合等离子体质谱测定方法。 本标准适用于地球化学样品中铂、钯的小铅试金-电感耦合等离子体质谱测定。方法检出限为Pt：0.10ng/g；Pd：0.12ng/g。

Determination of Platinum and Palladium in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry

DB51/T 2112-2016 地球化学样品中金的测定 电感耦合等离子体质谱法

本标准规定了地球化学样品（土壤、水系沉积物、岩石）中金的电感耦合等离子体质谱测定法。 本标准适用于地球化学样品（土壤、水系沉积物、岩石）中金的测定。方法检出限为：0.16 ng/g。

Determination of Gold in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry