77.120.01 有色金属综合 标准查询与下载

DB34/T 2581-2015 铜砷滤饼化学分析方法 铼含量的测定 电感耦合等离子体原子发射光谱法

本标准规定了铜砷滤饼中铼含量的测定方法。 本标准适用于铜砷滤饼中铼含量的测定，测定范围：50 g/t～5000 g/t。

Method for chemical analysis of copper arsenic filter cake Determination of rhenium content Inductively coupled plasma atomic emission spectrometry

DB34/T 2578-2015 粗硒化学分析方法 硒含量的测定 碘量法

本标准规定了粗硒中硒含量的测定方法。 本标准适用于粗硒中硒含量的测定。测定范围：75.00％～98.00％。

Crude selenium chemical analysis method Determination of selenium content iodometric method

DB34/T 2579-2015 铜电解液化学分析方法 氯含量的测定 自动电位滴定法

本标准规定了铜电解液中氯含量的测定方法。 本标准适用于铜电解液中氯含量测定。测定范围：0.0100 g/L～0.2300 g/L。

Methods for chemical analysis of copper electrolytes - Determination of chlorine content - Automatic potentiometric titration

DB34/T 2580-2015 碲化铜化学分析方法 碲含量的测定 重铬酸钾-硫酸亚铁铵容量法

本标准规定了碲化铜中碲含量的测定方法。 本标准适用于碲化铜中碲含量的测定。测定范围：10.00％～50.00％。

Copper telluride chemical analysis method Determination of tellurium content Potassium dichromate-ferrous ammonium sulfate volumetric method

DB22/T 2362-2015 镁合金中钠含量的测定 火焰原子吸收光谱法

Determination of sodium content in magnesium alloys by flame atomic absorption spectrometry

DB22/T 2361-2015 镁合金中高含量镍的测定 火焰原子吸收光谱法

Determination of High Content Nickel in Magnesium Alloy by Flame Atomic Absorption Spectrometry

GSO ISO/TR 7242:2015 轻金属及其合金的化学分析 -实验室间实验的统计解释

This Technical Report constitutes an attempt to explain the numerical results of a statistical examination in the simplest possible way and to show how statistical results can be used in laboratory practice. This simplified method is applicable when the number of laboratories is not more than 20 and when the number of results per laboratory is not more than 10.

Chemical analysis of light metals and their alloys -- Statistical interpretation of inter-laboratory trials

ASTM B823-15 铜基粉末冶金 (PM) 结构件材料的标准规格

1.1 This specification covers a variety of copper base powder metallurgy (PM) structural materials, including those used in applications where high electrical conductivity is required. It includes a classification system, or material designation code. With the classification system, this specification includes chemical composition and minimum tensile yield strength. Note 1: Paragraphs 6.1 and 8.1 govern material classification by the designation code. The classification system is explained in the Appendix. Note 2: Materials classified as C-0000 are expected to be used in applications where high electrical conductivity is required. 1.2 With the exception of density values, for which the cubic centimetre (g/cm3) unit is the industry standard, the values stated in inch-pound units are to be regarded as the standard. Values in SI units result from conversion. They may be approximate and are for information only.

Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

ASTM B899-15 关于有色金属和合金的标准术语

3.1 The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees. 3.2 Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used. 1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02. 1.2 To standardize the terminology used in these documents. 1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

Standard Terminology Relating to Non-ferrous Metals and Alloys

DB34/T 2270-2014 铜阳极泥 铜、金、银、硒、铋、铅含量测定 波长色散 X射线荧光光谱法

本标准规定了铜阳极泥中铜、金、银、硒、铋、铅含量的测定方法。 本标准适用于铜阳极泥中铜、金、银、硒、铋、铅含量的测定。

Determination of copper, gold, silver, selenium, bismuth, lead content in copper anode slime wavelength dispersive X-ray fluorescence spectrometry

YS/T 441.2-2014 有色金属平衡管理规范 第2部分:铅选矿冶炼

YS/T 441的本部分规定了铅选矿冶炼部分金属平衡管理的术语、管理职责、金属平衡计算公式、金属平衡表的编制方法及格式等。本部分适用于铅及其附属产品选矿冶炼生产企业。

Management rules of nonferrous metals balance.Part 2:Lead enrichment and metallurgy

YS/T 952-2014 铜钼多金属矿化学分析方法 铜和钼量的测定 电感耦合等离子体原子发射光谱法

本标准规定了铜钼多金属矿石中铜和钼含量的测定方法。本标准适用于铜钼多金属矿石中铜和钼含量的测定。测定范围为0.001 0%~5.00%。

Methods for chemical analysis of multi-metallic ores.Determination of copper and molybdenum contents.Inductively coupled plasma-atomic emission spectrometry

YS/T 441.1-2014 有色金属平衡管理规范 第1部分:铜选矿冶炼

YS/T 441的本部分规定了铜选矿冶炼部分金属平衡管理的术语、管理职责、金属平衡计算公式、金属平衡表的编制方法及格式等。本部分适用于铜及其附属产品选矿冶炼生产企业。

Management rules of nonferrous metals balance.Part 1:Copper enrichment and metallurgy

YS/T 441.3-2014 有色金属平衡管理规范 第3部分:锌选矿冶炼

YS/T 441的本部分规定了锌选矿冶炼部分金属平衡管理规范的术语、管理职责、金属平衡计算公式、金属平衡表的编制方法及格式等。本部分适用于锌及其附属产品选矿冶炼生产企业。

Management rules of nonferrous metals balance.Part 3:Zinc enrichment and metallurgy

YS/T 441.4-2014 有色金属平衡管理规范 第4部分:锡选矿冶炼

YS/T 441的本部分规定了锡选矿冶炼金属平衡管理的术语、管理职责、金属平衡计算公式、金属平衡表的编制方法及格式等。本部分适用于锡及其附属产品选矿冶炼生产企业。

Management rules of nonferrous metals balance.Part 4:Tin enrichment and metallurgy

YS/T 441.5-2014 有色金属平衡管理规范 第5部分:金、银冶炼

YS/T 441的本部分规定了有色金属金、银冶化部分金属平衡管理的术语、管理职责、金属平衡计算公式、金属平衡表的编制方法及格式等。本部分适用于以有色金属冶金尾料阳极泥为原料的金、银及其附属产品冶炼生产企业。

Management rules of nonferrous metals balance.Part 5:Gold and silver metallurgy

YS/T 951-2014 红土镍矿 交货批水分含量的测定

本标准规定了红土镍矿交货批水分含量的测定方法。本标准适用于红土镍矿交货批水分含量的测定。

Laterite nickel ores.Determination of moisture content of a consignment

YS/T 950-2014 散装红土镍矿取制样方法

本标准规定了采取和制备散装红土镍矿品质特性测定用样品的一般程序、基本原则、设备和操作程序。本标准适用于传送带、货车、料箱、船、料堆、集装袋转运的散装红土镍矿样品的采取和制备。

Methods for sampling and sample preparation of laterite nickel ores in bulk

DB51/T 1782-2014 地质样品中铌、钽的测定 电感耦合等离子体质谱法

Determination of Niobium and Tantalum in Geological Samples by Inductively Coupled Plasma Mass Spectrometry

DB51/T 1781-2014 钒钛磁铁矿中全铁、钛、钒的测定 电感耦合等离子体光谱法

Determination of total iron, titanium and vanadium in vanadium-titanium magnetite by inductively coupled plasma spectrometry