共找到 274 条与 有色金属综合 相关的标准,共 19 页
Determination of Niobium and Tantalum in Geological Samples by Inductively Coupled Plasma Mass Spectrometry
本标准规定了铜及铜合金板、带、箔材(以下简称产品)能源消耗(以下简称能耗)限额的技术要求、计算原则、计算范围、计算方法和节能管理与措施。 本标准适用于铜及铜合金加工企业板、带、箔材生产能耗的计算、考核,以及对新建项目的能耗控制。
Norm of energy consumption per unit products of copper and copper-alloy sheet,strip,foil
Aluminium foil for packing. Specifications
Aluminium foil for technical purposes. Specifications
3.1 The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees. 3.2 Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used. 1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02. 1.2 To standardize the terminology used in these documents. 1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.
Standard Terminology Relating to Non-ferrous Metals and Alloys
Titanium nitride coatings by dry processing
YS/T 3015的本部分规定了载金炭中铜、铁、钙和镁含量的测定方法、本部分适用于载金炭中铜、铁、钙和镁含量的测定、测定范围:铜0.010%~2.00%;铁0.010%~1.00%;钙 0.050%~2.00%;镁 0.010%-0.50%、
Methods for chemical analysis of gold-loaded carbon.Part 4:Determination of copper,iron,calcium and magnesium contents.Inductively coupled plasma-atomic emission spectrometry
YS/T 3015的本部分规定了载金炭中钙和镁含量的测定方法、本部分适用于载金炭中钙和镁含量的测定、测定范围:钙0.050%~2.0% ;镁0.010%~0.50%、
Methods for chemical analysis of gold-loaded carbon.Part 3:Determination of calcium and magnesium contents.Flame atomic absorption spectrometry
YS/T 3015的本部分规定了载金炭中铜和铁含量的测定方法、本部分适用于载金炭中铜和铁含量的测定、测定范围:铜0.010%~2.00%;铁0.010%~1.00%、
Methods for chemical analysis of gold-loaded carbon.Part 2:Determination of copper and iron contents.Flame atomic absorption spectrometry
YS/T 3015的本部分规定了载金炭中水分含量的测定方法、本部分适用于载金炭中水分含量的测定、测定范围:10.00%~40.00%、
Methods for chemical analysis of gold-loaded carbon.Part 1:Determination of moisture content.Desiccation gravimetric method
本标准规定了载金炭的要求、试验方法、检验规则、标志、包装、运输、贮存及订货单(或合同)内容、本标准适用于氰化提金工艺(如堆浸、池浸、炭装)产出的载金炭、本标准还适用于氰化废液、尾矿库上清液回收金产出的载金炭、
Gold-loaded carbon
Plain aluminum foil web for packing of food products for household purposes. Specifications
本标准规定了有色金属精矿产品的包装、标志、运输和贮存。本标准适用于有色金属精矿产品:铜、铅、锌、金、银、钼、镍、锡等。
Nonferrous-metals concentrate products-Packing,marking,transporting and storing
Material Numbers - Part 4: System of the Principal Groups 2 and 3: Non-ferrous Metals
YS/T 745的本部分规定了铜阳极泥中锑含量的测定方法。 本部分适用于铜阳极泥中锑含量的测定。测定范围:0.50%~10.00%。
Methods for chemical analysis of copper anode slime.Part 9:Determination of antimony content.Flame atomic absorption spectrophotometry method
本标准规定了铝土矿石的磨矿功指数的测量方法。 本标准适用于铝土矿石的磨矿功指数测量方法。适用产品粒度范围为45μm~500μm。
Test method for the grinding work index of bauxitic ore
Specifications for Classification of Precious Metals, Jewelry and Jade Stores (Counters)
Titanium alloys-Method for determination of lanthanum,cerium, praseodymium and neodymium
이 표준은 타이타늄 합금 중의 란타넘, 세륨, 프라세오디뮴 및 네오디뮴의 정량 방법에 대해
Titanium alloys-Method for determination of lanthanum,cerium, praseodymium and neodymium
YS/T 775的本部分规定了铅阳极泥中砷、铜、硒含量的测定方法。 本部分适用于铅阳极泥中砷、铜、硒含量的测定。测定范围:砷:0.10%~2.00%、铜:1.00%~5.00%、硒:0.10%~4.00%。
Methods for chemical analysis of lead anode slime.Part 7:Determination of arsenic、copper and selenium content.Inductively coupled plasma atomic emission spectrometery
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号