77.140.65 钢丝、钢丝绳和环节链 标准查询与下载

ASTM A805/A805M-09(2021) 冷轧碳素钢扁线的标准规范

1.1 This specification covers carbon steel flat wire in coils or cut lengths. Flat wire is classified as a cold-rolled section, rectangular in shape, 0.500 in. [12.7 mm] or less in width and under 0.250 in. [6.35 mm] in thickness. 1.2 Low-carbon steel flat wire is produced from steel compositions with a maximum carbon content of 0.25 % by cast or heat analysis. 1.3 Carbon spring steel flat wire is produced to a carbon range in which the specified or required maximum is over 0.25 % by cast or heat analysis. 1.3.1 Two types of carbon spring steel flat wire are produced: 1.3.1.1 Untempered cold-rolled carbon spring steel flat wire, produced to several desirable combinations of properties and 1.3.1.2 Hardened and tempered carbon spring steel wire. 1.4 Definite application flat wire is a product developed for a specific application and may be specified only by size and descriptive name. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

NF A35-037-2:2021 钢制品 带保护和护套的高强度钢绞线 第2部分：滑动保护和护套钢绞线（P 型）的要求

Steel products - Protected and sheathed high strength steel strands - Part 2 : requirements for sliding protected and sheathed strands (type P)

NF A35-037-1:2021 钢制品 高强度钢绞线和护套钢绞线 第1部分：一般要求

Steel produts - Producted and sheathed high strength steel strands - Part 1 : general requirementss

PN-EN 12385-5-2021-08 E 钢丝绳 安全 第5部分：电梯用绞合绳

Steel wire ropes -- Safety -- Part 5: Stranded ropes for lifts

GSO EN 13658-2:2021 金属板条和珠子 定义、要求和测试方法 第2部分：外部渲染

This European Standard specifies the requirements and test methods of metal lath and beads for external render-ing. This European Standard covers metal lath intended to be used for fixing to structures or solid backgrounds to pro-vide a key to hold the plaster in position. Used in this way it enables fire protecting plastering systems to be pro-vided. This European Standard covers metal beads intended to be used to improve the protection of external angles and also provide features to the external finish of the construction and which can also be used as movement or expan-sion beads. They also contribute to fire protection.

Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

GSO ASTM A492:2021 不锈钢绳索钢丝的标准规范

This specification covers the standard for the more commonly used types of round stainless steel wire intended especially for stranding into wire rope. Chemical analysis shall be performed on the steel and the chemical composition shall conform to the required values in carbon, manganese phosphorus, sulfur, silicon, chromium, nickel, molybdenum, and nitrogen. The material shall also meet the requirements in tensile strength.

Standard Specification for Stainless Steel Rope Wire

GSO ISO 17746:2021 钢丝绳网板和卷 定义和规范

ISO 17746:2016 specifies the characteristics of steel wire rope net panels and rolls for retaining of unstable slopes controlling and preventing rockfalls and loose debris flow along roads, highways and railway, urban areas, mines and quarries, and for snow avalanche protection. Steel wire rope net panels and rolls are produced from metallic-coated wire ropes.

Steel wire rope net panels and rolls — Definitions and specifications

GSO ASTM A392:2021 镀锌钢勾花栅栏织物的标准规范

This specification covers zinc-coated (galvanized) steel chain-link fence fabric, zinc coated either before or after weaving. The wire shall be woven throughout in the form of approximately uniform square mesh, having parallel sides and horizontal and vertical diagonals of approximately uniform dimensions. The top and bottom of the fabric shall be knuckled or twisted. A typical diamond count for each standard height is given. Chain-link fabric shall conform to the requirements specified for (1) mesh size, (2) wire size, (3) fabric height, (4) selvage, (5) zinc coating weight (Class 1or Class 2), and (6) breaking strength. The standard length of rolls and sampling requirements for testing are specified as well.

Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

GSO ISO 17745:2021 钢丝环网板 定义和规范

ISO 17745:2016 specifies the characteristics of steel wire ring net panel for retaining of unstable slopes controlling and preventing rockfalls and loose debris flow along roads, highways and railway, urban areas, mines and quarries, and for snow avalanche protection produced from metallic-coated steel wire or advanced metallic coating. It is not applicable to anchors or soil nails for fixing of steel mesh to an unstable slope.

Steel wire ring net panels — Definitions and specifications

OENORM EN 12385-3-2021 钢丝绳 安全 第3部分：使用和维护信息

Steel wire ropes - Safety - Part 3: Information for use and maintenance

SN/T 5303-2021 进口钢丝绳检验规程

Inspection regulations for imported wire ropes

LST EN 12385-5-2021 钢丝绳 安全 第5部分：电梯用绞合绳

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

PN-EN 12385-3-2021-05 E 钢丝绳 安全 第3部分：使用和维护信息

Steel wire ropes -- Safety -- Part 3: Information for use and maintenance

T/CISA 109-2021 绿色设计产品评价技术规范 胎圈用钢丝

本文件规定了胎圈用钢丝绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法。 本文件适用于胎圈用钢丝的绿色设计产品评价

Technical specification for green-design product assessment - bead wire

YB/T 4296-2021 纸浆板打包用镀锌钢丝

Galvanized steel wire for pulp board packaging

UNI EN 12385-3-2021 钢丝绳 安全 第3部分：使用和维护信息

Steel wire ropes - Safety - Part 3: Information for use and maintenance

BS EN 12385-5:2021 钢丝绳 安全 电梯用绞合绳

Steel wire ropes. Safety. Stranded ropes for lifts

DS/EN 12385-5:2021 钢丝绳《安全》第5部分：电梯用绞合绳

Steel wire ropes – Safety – Part 5: Stranded ropes for lifts

NF A47-205-5:2021 钢丝绳 安全 第5部分：电梯用绞合绳

Steel wire ropes - Safety - Part 5 : stranded ropes for lifts

ASTM A740-21 五金布（编织或焊接镀锌钢丝网）的标准规范

1.1?This specification covers woven or welded galvanized steel wire fabric commercially known as hardware cloth. It is customarily used for window and screen door guards, tree guards, industrial machine guards, sand screens, and grain bins. It serves as a protective screen again

Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)