共找到 606 条与 特殊用管钢 相关的标准,共 41 页
Hydraulic fluid power -- Plain-end, seamless and welded precision steel tubes -- Dimensions and nominal working pressures
Green Design Product Evaluation Technical Specification Ductile Iron Pipe
Hot finished steel structural hollow sections -- Part 3: Technical delivery conditions for high strength and weather resistant steels
Cold formed welded steel structural hollow sections -- Part 3: Technical delivery conditions for high strength and weather resistant steels
本文件规定了低Cr耐CO2腐蚀套管和油管用无缝钢管的术语和定义、钢级表示方法、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、涂层防护和质量证明书。 本文件适用于制造CO2 腐蚀环境情况下套管和油管用的管体和接箍坯料(以下简称钢管)。
Low Cr CO2 Corrosion Resistant Seamless Steel Tubes for Casing and Oil Pipes
本文件规定了高强度钻杆用无缝钢管的术语、定义、符号和缩略语、牌号表示方法、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于制造石油行业钻探高强度、高韧性钻杆管体用无缝钢管(以下简称钢管)。
Seamless steel pipe for high strength drill pipe
本文件规定了光伏支架用方形和矩形焊接钢管的分类及代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于光伏支架用连续冷弯焊接成型方形和矩形管(以下简称方矩管),不适用于拉拔、冲压、折弯等方式生产的方矩管。
Square and rectangular welded steel pipes for photovoltaic support
本部分规定了电站用马氏体耐热钢08Cr9W3Co3VNbCuBN(G115) 无缝钢管的分类和代号、尺寸、外形、重量及允许偏差、技术要求、试样、检验和试验方法、检验规则、包装、标志和质量证明书。 本部分适用于制造600℃以上电站锅炉和管道用马氏体耐热钢08Cr9W3Co3VNbCuBN(G115)无缝钢管(以下简称“钢管”)。
Seamless steel tubes and pipes of martensitic heat-resistant steel of 08Cr9W3Co3VNbCuBN(G115) for power station
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections -- Amendment 1: Change of ul
Petroleum and natural gas industries -- Steel drill pipe -- Amendment 1 (ISO 11961:2018/Amd 1:2020)
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes -- Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections -- Amendment 1: Change of ultrasonic test frequency; change of accepta
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018/Amd 1:2020); Amendement A1
本文件规定了压水堆核电站核安全级仪表系统用奥氏体不锈钢无缝钢管(以下简称“钢管”)的订货内容、制造方法、技术指标、试验方法、检验规则、包装、标志和质量证明书等要求。 本文件适用于外径6.0mm~20 mm、壁厚0.5mm~4.0 mm的钢管。其他非核安全级仪表系统用奥氏体不锈钢管也可参照本文件执行。
Specification for austenitic stainless steel seamless tube in nuclear-safety-class instrument system
本文件规定了塔机用尖角方管的产品代号、订货内容、截面尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。
Tower crane with sharp angle square tube
本文件规定了方形和矩形焊接钢管(以下简称方矩管)“领跑者”标准的术语和定义、评价指标体系、评价方法及等级划分。 本文件适用于方矩管企业标准水平评价。相关机构在制定企业标准“领跑者”评估方案时可参照使用,企业在制定企业标准时也可参照使用。
"Top Runner" Standard Evaluation Requires Square and Rectangular Welded Steel Tubes
Electrically welded steel pipe for drive shaft
Precision seamless steel pipe for injection molding machinery
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号