77.140.75 特殊用管钢 标准查询与下载

T/CISA 283-2022 钢管色标

本文件规定了钢管色标的术语和定义、颜色和色卡、色标规定。

Color coding for steel tubes and pipes

T/CISA 282-2022 工程机械液压缸用冷拔精密内径无缝钢管

本文件规定了工程机械液压缸用冷拔精密内径无缝钢管的分类、代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。

Cold-drawn precision inside diameter seamless steel tubes for engineering machinery hydraulic cylinders

ASTM A1085/A1085M-22 冷成型焊接碳钢空心结构型材（HSS）标准规范

1.1 This specification covers cold-formed welded carbon steel hollow structural sections (HSS) for welded or bolted construction. These shapes are utilized in but not limited to the following applications: buildings, bridges, towers, cranes, sign supports and poles, off-shore production and drilling platforms, roll-over protective structures (ROPS), falling object protective structures (FOPS), and amusement rides. 1.2 This HSS is produced in welded sizes with a periphery of 88 in. [2235 mm] or less, and a specified nominal wall thickness of 0.148 in. [3.8 mm] or greater and 1.000 in. [25.4 mm] or less. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.4 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

YB/T 6081-2022 卫生级不锈钢洁净管

本文件规定了卫生级不锈钢洁净管的分类和代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于医药设施、通讯系统等领域用达到卫生级的不锈钢洁净冷轧（拔）无缝钢管。

Sanitary stainless steel clean pipe

ASTM A595/A595M-22 钢管 低碳或高强度低合金标准规范 用于结构用途

1.1 This specification covers three grades of seam-welded, round, tapered steel tubes for structural use. Grades A and B are of low-carbon steel or high-strength low-alloy steel composition and Grade C is of weather-resistant steel composition. 1.1.1 The product may be modified from its round cross section into other shapes without subsequent retesting. 1.2 This tubing is produced in welded sizes in a range of diameters from 2 3⁄8 to 30 in. [60 to 762 mm] inclusive. Wall thicknesses range from 0.1046 to 0.375 in. [2.66 to 9.53 mm]. Tapers are subject to agreement with the manufacturer. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

ASTM A1097/A1097M-22 电熔（电弧）焊接（NPS 10及以上）碳钢套管标准规范

1.1 This specification covers electric-fusion (arc)-welded straight seam or spiral seam steel casing pipe NPS 10 (Note 1) and larger in diameter (outside diameter as specified by purchaser) with wall thickness 0.200 in. [5.1 mm] or greater. It shall be permissible to specify and furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. The pipe is intended for use as casing or encasement in horizontal underground boring, tunneling, or open trench applications. 1.2 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)

KS D 3577-2022 锅炉和热交换器管用不锈钢

Stainless steel for boiler and heat exchanger tubes

T/NDAS 59-2022 双相不锈钢无缝管

1、范围 本文件规定了双相不锈钢无缝管（以下简称“钢管”）的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明文件。 本文件适用于石油、化工、医疗、食品、轻工、机械仪表等工业输送管道以及机械结构部件的双相不锈钢无缝管。 2、订货内容 本文件规定了双相不锈钢无缝管的订货内容。 3、尺寸、外形、重量 本文件规定了双相不锈钢无缝管的尺寸、外形、重量。 4、技术要求 本文件规定了双相不锈钢无缝管的技术要求。 5、试验方法 本文件规定了双相不锈钢无缝管的试验方法。 6、检验规则 本文件规定了双相不锈钢无缝管的检验规则。 7、标志、包装、运输、贮存 本文件规定了双相不锈钢无缝管的标志、包装、运输、贮存。 8、质量证明文件 本文件规定了双相不锈钢无缝管的质量证明文件。

Duplex stainless steel seamless pipe

KS D 3864-2022 焊接结构用冷轧碳钢方管

Cold rolled carbon steel square pipes for welded structure

T/CISA 251-2022 “领跑者”标准评价要求 流体输送用不锈钢无缝钢管

本文件规定了流体输送用不锈钢无缝钢管（以下简称钢管）“领跑者”标准评价的评价指标体系和评价方法及等级划分。

Assessment requirements for forerunner standards—Seamless stainless steel pipes for fluid transport

T/SSEA 0180-2022 一般结构用焊接钢管

本文件规定了一般结构用焊接钢管的分类及代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装标志和质量证明书等内容。 本文件适用于一般结构用焊接钢管。

Welded steel pipes for general structures

22/30450373 DC BS EN 10305-3 用于精密应用的钢管 交货技术条件 第 3 部分：焊接冷定径管

BS EN 10305-3. Steel tubes for precision applications. Technical delivery conditions - Part 3. Welded cold sized tubes

T/ZZB 2017-2022 高速列车制动系统用精密不锈钢无缝管

本文件规定了高速列车制动系统用精密不锈钢无缝管（以下简称钢管）的术语和定义、订货内容、 基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。  本文件适用于外径为6 mm～50 mm、壁厚为0.8 mm～4.0 mm范围的制动系统用精密奥氏不锈钢无缝钢 管。

Precision seamless tube of stainless steel for braking system of high speed train

T/CAMT 13-2022 镀锌钢带焊接钢管

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 订货内容　 4.1 一般要求　 4.2 特殊要求　 5 分类与代号　 6 尺寸、外形、重量及允许偏差 6.1 圆管　 6.2 方、矩钢管　 6.3 重量　 6.4 长度　 6.5 截面特性计算公式　 6.6 其它　 7 技术要求　 7.1 钢带　 7.2 钢带的表面质量　 7.3 钢带的检查与验收　 7.4 制造方法　 7.5 交货状态　 7.6 力学性能　 7.7 圆管的拉伸试验　 7.8 圆管的工艺性能　 7.9 方、矩管的力学性能  7.10 镀锌层的重量测定　 7.11 盐雾试验　 8 检验规则　 8.1 检验分类　 8.2 检查和验收　 8.3 组批规则　 8.4 复验和判定　 8.5 数值修约　 9 试验方法　 9.1 钢的化学成分　 9.2 检验项目　 10 产品包装、储存、运输、标志及质量证明书 10.1 包装　 10.2 储存　 10.3 运输　 10.4 标志　

Steel pipe welded by galvanized steel strip

JIS G 3429:2022 高压气瓶用无缝钢管

Seamless steel tubes for high pressure gas cylinders

T/ZZB 2608-2021 输送管道用高承压不锈钢无缝钢管

本文件规定了输送管道用高承压不锈钢无缝管的术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志、质量证明书、贮存、运输和质量承诺。 本文件适用于公称外径不大于108 mm的高压流体输送管道用不锈钢无缝钢管（以下简称钢管） 。

Seamless stainless steel pipes for high pressure fluid transport

T/GDSS 001-2021 装饰用不锈钢焊管

本文件规定了装饰用不锈钢焊管的分类、代号、技术要求、试验方法、检验规则、包装和贮存。 本文件代替T/GDSS 001—2018《装饰用不锈钢焊管》，与T/GDSS 001—2018相比，主要技术变化如下： ——更改了关于型号标识的要求及其示例； ——更改了SUS304材料中的磷(P)元素含量要求； ——增加了三种牌号钢种J4、J1、J3，及对应的元素成分和物理性能； ——表13添加了检验项目硬度及其测试方法； ——修改了管材尺寸的偏差要求； ——修改了管材的包装、标识的相关规定； ——修改了管材的取样数量和组批规则； ——删除了管材的焊接方法和热处理方法； ——删除了管材工艺性能中的试弯试验； ——增加了术语“装饰用不锈钢焊管”、“拉丝”、“压花”、“印花”； ——增加了三种交货状态及相应代号； ——增加了管材压花深度、印花深度和表面光泽度要求； ——更新了规范性引用文件的版本。

Stainless steel welded tubes for decoration

YB/T 4173-2021 高温用锻造镗孔厚壁无缝钢管

Forged boring thick wall seamless steel pipe for high temperature

YB/T 4934-2021 液压缸用热轧无缝钢管

Hot rolled seamless steel pipe for hydraulic cylinder

T/SSEA 0149-2021 油套管用抗H2S腐蚀无缝钢管

本文件规定了油管和套管用抗H2S应力腐蚀无缝钢管的钢级表示方法、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于H2S分压大于0.0003MPa的服役条件下油套管用无缝钢管（以下简称“钢管”），也适用于与钢管配套使用的接箍坯料、接箍材料、短节和附件材料等。

Hydrogen sulfide stress corrosion resistant seamless for tubing and casing