77.150.60 铅、锌和锡产品 标准查询与下载
共找到 227 条与 铅、锌和锡产品 相关的标准，共 16 页
This part of EN 611 specifies the requirements for the fabrication, sampling, analysis and marking of pewterware. It does not cover articles manufactured from materials other than pewter which have been coated or clad with pewter.
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware
- ICS
- 77.150.60
- CCS
- 发布
- 1997-07-07
- 实施
- 1996-11-29
This European Standard specifies requirements for rolled flat products for building purposes made from zinc-copper-titanium alloy, in the form of strip, sheet or cut length. It covers products in the range of 0,6 mm up to and including 1,0 mm thickness and from 100 mm up to and including 1000 mm width.
Zinc and zinc alloys - Specification for rolled flat products for building
- ICS
- 77.150.60
- CCS
- 发布
- 1997-07-07
- 实施
- 1996-11-29
Requirements for fabrication, sampling, analysis and marking of pewterware.
Tin and tin alloys - Pewter and pewterware - Pewterware
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1997-01-15
- 实施
- 1997-01-15
Composition and tolerances on dimensions of a zinc/titanium/copper alloy for roofing. Typical available sizes, typical physical and mechanical properties.
Zinc and zinc alloys - Specification for rolled flat products for building
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1997-01-15
- 实施
- 1997-01-15
Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
- ICS
- 77.150.60
- CCS
- H61
- 发布
- 1997
- 实施
Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
- ICS
- 77.150.60
- CCS
- H61
- 发布
- 1997
- 实施
Tin and tin alloys. Pewter and pewterware. Part 2 : pewterware.
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1996-12-01
- 实施
- 1996-12-05
This European Standard specifies the requirements for the chemical compositions, surface conditions, sampling, analysis, inspection documentation and marking for five grades of ingot tin.
Tin and tin alloys - Ingot tin
- ICS
- 77.150.60
- CCS
- 发布
- 1996-09-13
- 实施
- 1995-07-27
The document specifies the requirements for the fabrication, sampling, analysis and marking of pewterware. It does not cover articles manufactured from materials other than pewter which have been coated or clad with pewter. The requirements for pewter are specified in DIN EN 611-1.
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware; German version EN 611-2:1996
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1996-08
- 实施
This document specifies requirements for rolled flat products for building purposes made from zinc-copper-titanium alloy, in the form of strip, sheet or cut length. It covers products in the range of 0,6 mm up to and including 1,0 mm thickness and from 100 mm up to and including 1000 mm width. It does not cover formed or shaped products or products prefabricated by any means other than cutting to size.
Zinc and zinc alloys - Specification for rolled flat products for building; German version EN 988:1996
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1996-08
- 实施
This document specifies requirements for rolled flat products for building purposes made from zinc-copper-titanium alloy, inThe form of strip, sheet or cut length. It covers products inThe range of 0,6 mm up to and including 1,0 mm thickness and from 100 mm up to and including 1000 mm width. It does not cover formed or shaped products or products prefabricated by any means other than cutting to size.
Zinc and zinc alloys - Specifications for rolled flat products for building
- ICS
- 77.150.60
- CCS
- 发布
- 1996-06-01
- 实施
Gives general requirements, including chemical composition, sampling and marking for five grades of ingot tin.
Tin and tin alloys - Ingot tin
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1996-04-15
- 实施
- 1996-04-15
This specification covers refined lead in pig, block, or hog form. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Specification for Pig Lead
- ICS
- 77.150.60
- CCS
- G54
- 发布
- 1996
- 实施
This specification covers lead sheet, strip, and plate of various alloys intended for use in chemical plants, sound attenuation, roofing, vibration dampening, flashing and weather stripping, waterproofing, and radiation shielding.The values stated in inch-pound units are to be regarded as the standard.
Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1996
- 实施
This document specifies the requirements for the chemical composition, sampling, analysis, inspection documentation and marking for five grades of ingot tin. The grade of tin included in this document are those which are traded internationally.#,,#
Tin and tin alloys - Ingot tin; German version EN 610:1995
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1995-09
- 实施
Zinc and zinc alloys. Secondary zinc.
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1995-06-01
- 实施
- 1995-06-05
Methods for chemical analysis of die casting zinc alloy
- ICS
- 77.150.60
- CCS
- H13
- 发布
- 1994-03-01
- 实施
- 1994-03-01
この規格は，JIS H 2201及びJIS H 5301に規定するダィカスト用亜鉛合金塊及びダィカスト亜鉛合金の光電測光法による発光分光分析方法について規定する。この規格は，アルミニウム，マグネシウム，銅，鉛，カドミウム，鉄及びすずの定量に適用する。
Method for atomic emission spectrophotoelectric analysis of die casting zinc alloy
- ICS
- 77.150.60
- CCS
- H13
- 发布
- 1994-03-01
- 实施
この規格は，押出製造した一般工業用に使用する鉛及び鉛合金管(以下，管という。)について規定する。なお，水道用鉛管は，JIS H 4312による。
Lead and lead alloy tubes for common industries
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1993-11-01
- 实施
この規格は，一般工業用に使用するDM鉛板について規定する。
DM lead sheets and plates
- ICS
- 77.150.60
- CCS
- H62
- 发布
- 1993-11-01
- 实施
