77.150.60 铅、锌和锡产品 标准查询与下载

LST EN 12844-2000 锌和锌合金 铸件 规范

Zinc and zinc alloys - Castings - Specifications

LST EN 1559-6-2000 铸造-交货技术条件-第6部分：锌合金铸件的附加要求

Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings

ASTM B102-00 铅和锡合金压铸件的标准规范

1.1 This specification covers die castings produced from five alloys whose primary metal is either lead or tin. Table 1 lists the designations for these alloys as well as their chemical compositions.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Lead- and Tin-Alloy Die Castings

LST EN 12548-2000 铅和铅合金 电缆护套和套管用铅合金锭

Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves

ASTM B102-00(2005) 铅和锡合金压模铸件的标准规范

1.1 This specification covers die castings produced from five alloys whose primary metal is either lead or tin. lists the designations for these alloys as well as their chemical compositions.1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Lead- and Tin-Alloy Die Castings

ANSI/ASTM B102:2000 铅和锡合金压模铸件规范

This specification covers die castings produced from five alloys whose primary metal is either lead or tin. lists the designations for these alloys as well as their chemical compositions. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Lead and Tin Alloy Die Castings

BS EN 12548:1999 铅和合金.电缆护套和套筒用铅合金锭

This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for the manufacture of electric cable sheathing and sleeves.

Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves

DIN EN 12548:1999 铅及铅合金.电缆护套和套筒用铅合金锭

Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves; German version EN 12548:1999

EN 12548:1999 铅及铅合金.电缆护套和套筒用铅合金锭

This European Standard specifies the designation, chemical composition, sampling and analysis, marking,labelling and other requirements for lead alloys in ingot form which are used forThe manufacture of electriccable sheathing and sleeves.

Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves

NF A58-003:1999 铅及铅合金.建筑物用薄铅板

Lead and lead alloys. Rolled lead sheet for building purposes.

DS/EN 12844:1999 锌和锌合金 铸件 规范

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

Zinc and zinc alloys - Castings - Specifications

BS EN 1559-6:1999 铸造.交付技术条件.锌合金铸件附加要求

To be read in conjunction with BS EN 1559-1:1997

Founding - Technical conditions of delivery - Additional requirements for zinc alloy castings

BS EN 12844:1998 锌和锌合金.铸件.规范

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

Zinc and zinc alloys - Castings - Specifications

BS EN 12844:1999 锌和锌合金 铸件 规范

Zinc and zinc alloys. Castings. Specifications

DIN EN 12844:1999 锌和锌合金.铸件.规范

The document specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

Zinc and zinc alloys - Castings - Specifications; German version EN 12844:1998

DIN EN 1559-6:1999 铸造.交货技术条件.第6部分:锌合金铸件的附加要求

The document specifies the additional technical report delivery conditions for zinc alloy castings. It applies to castings made from zinc alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting.

Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings; German version EN 1559-6:1998

ANSI/ASTM B894:1999 锌铜铝合金压模铸件规范

This specification covers zinc-copper-aluminum alloy die castings. (UNS Z46541). The values stated in inch-pound units are standard. The SI values in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Zinc-Copper-Aluminum Alloy Die Castings

ANSI/ASTM B86:1998 锌合金压模铸件规范

This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in . Seven alloy compositions are specified and designated as follows: Zinc Alloys Z33520, Z33523, Z35531, and Z35541 are used primarily in the manufacture of pressure die castings. Zinc-Aluminum Alloys Z35636, Z35631, and Z35841 are used in the manufacture of both foundry and pressure die castings. These alloys are also fabricated into continuous cast bar stock used for prototyping and screw machine stock. The values stated in inch-pound units are to be regarded as the standard. Systems of nomenclature used to designate zinc and zinc-aluminum (ZA) alloys used for casting are described in . This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Zinc-Alloy Die Castings

EN 1559-6:1998 铸造.交货的技术条件.第6部分:锌合金铸件附加要求

This part of EN 1559 applies to castings made from zinc alloys produced by sand casting, permanent mould castingpressure dieng, centrifugal casting, continuous casting or investment casting.

Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings

EN 12844:1998 锌和锌合金.铸件.规范;已批准的欧洲文本［代替:GME QN 4096G0］

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

Zinc and zinc alloys - Castings - Specifications