77.150.99 其他有色金属产品 标准查询与下载

T/NPCA 01-2023 冶炼用钼酸钠

序号　项    目　指  标 1　钼含量，wt%　≥30 2　水分，wt%　≤15 3　碱度（以NaOH计），wt%　≤8 4　砷，mg/kg　报告

Sodium molybdate for smelting

T/JGE 0049-2023 江西绿色生态 烧结钕铁硼永磁材料

本文件规定了“江西绿色生态 烧结钕铁硼永磁材料”的术语和定义、评价要求和品牌互认等内容。 本文件适用烧结钕铁硼永磁材料申请“江西绿色生态”品牌认证活动。“江西绿色生态 烧结钕铁硼永磁材料”产品的质量检测可参照本文件执行。

Jiangxi Green Ecology -Sintered neodymium iron boron permanent magnets

T/LCH 004-2023 含锂电解铝固体废物提炼制碳酸锂技术规范

本文件规定了碳酸锂的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本文件适用于以含锂电解铝固体废物为原料提炼制成的碳酸锂。

Technical specifications for the extraction of lithium-containing electrolytic aluminum solid waste to produce lithium carbonate

T/LCH 005-2023 含锂电解铝固体废物制碳酸锂原料技术规范

本文件规定了碳酸锂原料的要求、检验规则、标志、包装、运输、贮存及质量证明书。 本文件适用于以含锂电解铝固体废物经预处理、破碎、烧结等工序制成的用于提炼碳酸锂的原料。

Technical specification for lithium carbonate raw material production from lithium-containing electrolytic aluminum solid waste

YS/T 609-2023 铂电极浆料

Platinum electrode paste

YS/T 598-2023 超细二氧化钌粉

Super fine ruthenium oxide powder

YS/T 639-2023 纯三氧化钼

Pure molybdenum trioxide

YS/T 245-2023 粉冶钼合金顶头

Sintered molybdenum alloy mandrels for tube-rolling

YS/T 611-2023 正温度系数陶瓷用电极浆料

Electrode paste used for positive temperature coefficient ceramic

YS/T 1597-2023 热电偶用钼管

Molybdenum tubes for thermocouple

YS/T 1595-2023 电子封装用钼铜层状复合材料

Molybdenum copper layered composite material for electronic packaging

T/CNIA 0183-2023 进口锑精矿中有害元素限量规范

本文件规定了进口锑精矿中有害元素砷、汞、镉的技术要求、试验方法及检验规则。 本文件适用于进口锑精矿产品。

Specifications for Limits of Harmful Elements in Imported Antimony Concentrates

ASTM B387/B387M-23 钼和钼合金棒材、棒材和线材的标准规范

1.1 This specification covers unalloyed molybdenum and molybdenum alloy bar, rod, and wire as follows: 1.1.1 Molybdenum 360—Unalloyed vacuum arc-cast molybdenum. 1.1.2 Molybdenum 361—Unalloyed powder metallurgy molybdenum. 1.1.3 Molybdenum Alloy 363—Vacuum arc-cast molybdenum–0.5 % titanium–0.1 % zirconium (TZM) alloy. 1.1.4 Molybdenum Alloy 364—Powder metallurgy molybdenum–0.5 % titanium–0.1 % zirconium (TZM) alloy. 1.1.5 Molybdenum 365—Unalloyed vacuum arc-cast molybdenum, low carbon. 1.1.6 Molybdenum Alloy 366—Vacuum arc-cast molybdenum, 30 % tungsten alloy. 1.2 This specification covers wire no smaller than 0.020 in. [0.51 mm] in diameter or of equivalent cross-sectional area. Specification F289 covers diameters up to 0.020 in. [0.51 mm]. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

T/SHDSGY 036-2022 汽车转向器用杻杆材料

本文件规定了汽车转向器用杻杆材料的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本文件适用于中大小型汽车转向系统驱动单元模块内的扭杆类材料。

The c-rod material used in automobile switchgear

YS/T 1518-2022 氢燃料电池用锆带

本文件适用于厚度为0.1mm～0.3mm的氢燃料电池用锆带。

Zirconium ribbon for hydrogen fuel cells

YS/T 1534-2022 单水氢氧化铯

本文件适用于以各种方法生产的单水氢氧化铯。

Cesium hydroxide monohydrate

YS/T 1558-2022 高纯锆锭

本文件适用于通过锆、铪分离后的锆原料，经电子束熔炼生产的高纯锆锭。

High purity zirconium ingot

YS/T 592-2022 电镀用氰化亚金钾

本文件适用于电镀行业用的氰化亚金钾[KAu（CN）2]。

Potassium gold cyanide for electroplating

YS/T 1529-2022 粗二氧化碲

本文件适用于从阳极泥、碲渣富集提取的粗二氧化碲。本产品主要用于碲精炼及碲化工生产的原料。

Crude tellurium dioxide

YS/T 1555-2022 铂钴铬硼合金溅射靶材

本文件适用于以高纯钴、铬、铂、硼为原料，经真空熔铸或粉末冶金烧结等工艺制得的钴铬铂硼合金溅射靶材，产品主要用于机械硬盘磁存储介质的磁记录层材料。

Platinum cobalt chromium boron alloy sputtering target