83.040.20 橡胶合成配料 标准查询与下载

ASTM D4818-21 橡胶复合材料的标准分类硫化促进剂

1.1 This classification covers vulcanization accelerators and defines their important chemical and physical characteristics. The properties outlined herein are useful for quality control; they can frequently be directly or indirectly related to the performance characteristics in rubber compounds. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

ASTM D1817-05(2021) 橡胶化学品密度的标准试验方法

1.1 This test method covers the determination of the density of solid chemicals used as rubber additives during processing and manufacture. It is intended for determining the density of the rubber chemical itself and not for the determination of the effective density of the chemical in a rubber. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Chemicals—Density

ASTM D4075-06(2021) 橡胶复合材料的标准试验方法金属的火焰原子吸收分析测定

1.1 These test methods cover the determination of metals in rubber compounding materials by flame atomic absorption. 1.2 The test methods include the following materials: Sections Zinc oxide 11 – 20 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For a specific warning statement, see 6.1.) 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

ASTM D5461-06(2021) 橡胶复合材料的标准试验方法粉末橡胶复合材料的湿筛分析

1.1 This test method covers a procedure for the qualitative evaluation of aggregate size and aggregate size distribution of powdered rubber accelerators and other compounding materials which are insoluble in water. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

ASTM D4569-06(2021) 橡胶复合材料的标准试验方法硫中酸度的测定

1.1 This test method covers the determination of the acid material, which disassociates in distilled water, that is present in sulfur. The acidity is determined by an electrometric or visual titration. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

ASTM D1766-05(2021) 橡胶化学品溶解度的标准试验方法

1.1 This test method covers a practical test for the solubility of commercial chemicals used in rubber products. 1.2 It is not a true measure of solubility, since equilibrium is not approached from both sides, that is, higher temperature and lower temperature. 1.3 The test method indicates the total solubility, under the conditions of the test, of all components in the presence of each other and in the proportions present in the sample. 1.4 This test method does not measure the solubility of a rubber chemical in rubber. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Chemicals—Solubility

ASTM D4315-21 橡胶复合材料氧化锌的标准试验方法

1.1 These test methods cover chemical and physical tests for zinc oxide that are considered to be important to its use in rubber compounding. 1.2 The tests appear in the following order: Test Section Zinc Oxide 5 Lead and Cadmium 6 Sulfur 7 Heat Loss 8 Surface Area 9 Sieve Residue 10 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see 5.2. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Rubber Compounding Material—Zinc Oxide

ASTM D4295-89(2021) 橡胶复合材料的标准分类氧化锌

1.1 This classification system covers the compounding material commercially known as zinc oxide. The types of zinc oxide used in the rubber industry are related to the production process used. Typical chemical and physical properties are included. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Zinc Oxide

ASTM D3156-96(2021) 抗降解剂（抗氧化剂、抗臭氧剂和稳定剂）的橡胶色谱分析的标准实施规程

1.1 This practice covers the detection and identification by thin-layer chromatography of antidegradants (antioxidants, antiozonants, and stabilizers) that may be present in raw rubber or rubber products. Analysis for other types of antidegradants is possible as long as the requirements of the practice are met. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

ASTM D4571-21 橡胶复合材料的标准试验方法挥发性物质的测定

Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

ASTM D4934-02(2021) 橡胶复合材料的标准试验方法:2-苯并噻唑磺酰胺促进剂不溶物

1.1 This test method covers a general procedure for the determination of insoluble impurities of sulfenamides in suitable organic solvents. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

ASTM D4817-88(2021) 硬脂酸橡胶复合材料的标准分类

1.1 This classification covers the compounding materials commercially known as stearic acid. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Stearic Acid

ASTM D4676-94(2021) 橡胶复合材料防降解剂的标准分类

1.1 This classification covers antidegradants used in rubber and where appropriate defines their important chemical and physical characteristics for use in rubber. 1.2 The general term “antidegradant” describes materials used in rubber to protect against the effects of oxygen and ozone. Materials that fall in this general category include both antioxidants and antiozonants. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Antidegradants

ASTM D5460-02(2021)e1 橡胶复合材料的标准试验方法橡胶添加剂中的水

1.1 This test method covers a procedure for the determination of water in 2-mercaptobenzothiazole sulfenamide accelerators by a Karl Fischer coulometric titration. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

ASTM D5377-93(2021) 橡胶复合材料的标准分类磨煤

1.1 This classification covers the compounding material known as ground coal. It is generally used in rubber compounds as a filler. 1.2 There are three grades of ground coal based on particle size, ash, and moisture. The selected values for these properties are suitable for use in a rubber compound. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Ground Coal

ASTM D4578-06(2021) 用萃取法测定橡胶化学品硫百分比的标准试验方法

Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

ASTM D5230-21 炭黑自动单个颗粒硬度的标准试验方法

1.1 This test method covers a procedure for measuring individual pellet hardness of carbon black by the automated pellet hardness tester. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

ASTM D8411-21 橡胶复合材料的标准试验方法橡胶中2-巯基苯并噻唑（MBT）的测定

1.1 This standard test method covers a procedure for the determination of extractable 2-Mercaptobenzothiazole (MBT) in rubber by high performance liquid chromatography (HPLC) to assess its bioavailability. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Compounding Materials—Determination of 2-Mercaptobenzothiazole (MBT) in Rubber

T/CSTM 00512-2021 橡胶助剂 预分散母胶粒 CBS-80

本文件规定了橡胶助剂预分散母胶粒CBS-80的术语和定义、分类和编码、理化性能、组批规则、采样、试验方法、标志、包装、运输和贮存等内容。 本文件适用于橡胶助剂预分散母胶粒CBS-80的检验。

Rubber additives –Predispersed masterbatch - CBS-80

T/CSTM 00511-2021 印制电路板清洗用消泡剂 消抑泡性能的测试方法

本文件规定了印制电路板清洗在去膜和显影阶段用消泡剂消抑泡性能的测试方法。 本文件适用于印制电路板清洗去膜和显影阶段时，所用消泡剂消泡及抑泡性能的测试。

Defoamer for printed circuit board cleaning—Test method for defoaming and antifoaming performance