97.190 儿童用器具 标准查询与下载

23/30468461 DC BS EN 71-16 玩具安全 第16部分：玩具材料中的某些阻燃剂

BS EN 71-16 Safety of toys - Part 16. Certain flame retardants in toy materials

23/30472309 DC BS EN 71-19 玩具安全 第19部分：玩具材料中双酚 A 的迁移

BS EN 71-19 Safety of toys - Part 19. Migration of bisphenol A from toy materials

23/30472303 DC BS EN 71-17 玩具安全 第17部分：水性玩具材料中的异噻唑啉酮

BS EN 71-17 Safety of toys - Part 17. Isothiazolinones in aqueous toy materials

23/30472540 DC BS EN 71-15 玩具安全 第5部分：泡沫玩具材料中的甲酰胺

BS EN 71-15Safety of toys - Part 5. Formamide in foam toy materials

BS EN 16232:2013+A2:2023 儿童使用和护理用品 婴儿秋千

Child use and care articles. Infant swings

23/30478231 DC BS EN 12790-1 儿童护理用品 倾斜式摇篮和婴儿秋千 第1部分：适合儿童直至开始尝试坐起来的倾斜式摇篮和婴儿秋千

BS EN 12790-1. Child care articles. Reclined cradles and infant swings - Part 1. Reclined cradles and infant swings for children up to when they start to try to sit up

BS EN 14350:2020+A1:2023 儿童护理用品 饮水设备 安全要求及测试方法

Child care articles. Drinking equipment. Safety requirements and test methods

23/30478723 DC BS EN 17826 儿童护理用品 化学危险 要求及测试方法

BS EN 17826 Child care articles. Chemical hazards. Requirements and test methods

T/CAB 0268-2023 便携式儿童散步车安全技术规范

主要包括便携式儿童散步车的术语和定义、技术要求、试验方法、标识和使用说明等。

Safety technical specification for portable child conveyance

T/PWSBZ 0004-2023 儿童遛娃神器技术要求

本标准规定了供一名或是两名儿童乘坐的遛娃神器的技术要求和测试方法，玩具遛娃神器和用于其他用途的遛娃神器不适用本标准。

Technical requirements for children’s walking equipment

23/30473817 DC BS EN 1888-3 带轮儿童交通工具 第3部分：用于体育活动的较重儿童的婴儿车

BS EN 1888-3. Wheeled child conveyances - Part 3. Pushchairs for heavier children intended for sport activities

23/30466479 DC BS EN 1273:2020/A1 儿童护理用品 婴儿学步架 安全要求及测试方法

BS EN 1273:2020/A1 Child care articles. Baby walking frames. Safety requirements and test methods

T/PWSBZ 0003-2023 户外露营车技术要求

本标准规定了户外露营所使用的推（拉）车辆的术语和定义，以及相关技术要求和检测方法。

Technical requirements for outdoor camping vehicles

ASTM F1004-23 膨胀门和可膨胀外壳的标准消费者安全规范

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures. 1.2 Products known as expansion gates and expandable enclosures, or by any other name, which are in the scope of this consumer safety specification are intended for young children aged six months through 24 months, and are defined in Section 3. 1.3 Expansion gates and expandable enclosures defined in Section 3 are for domestic use and are not to be confused with other types of gates or enclosures that may be specifically designed for commercial, institutional, agricultural, pet use, or any other such use. 1.4 No expansion gate or expandable enclosure as defined in Section 3, that is, produced after the approval date of this consumer safety specification either by label or other means, shall indicate compliance with this specification unless it conforms to all the requirements contained herein. 1.5 For expediency, expansion gates and expandable enclosures as defined in Section 3 will heretofore be referred to in this consumer safety specification as “gates” and “enclosures” unless referred to definitively. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.11 on Bed Rails and Expandable Gates. Current edition approved Jan. 1, 2023. Published January 2023. Originally approved in 1986. Last previous edition approved in 2022 as F1004 – 22. DOI: 10.1520/F1004-23. *A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

ASTM F2285-22 商业用尿布更换台的标准消费者安全性能规范

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to children presented by diaper changing tables as identified in the introduction. 1.2 This specification is intended to apply to diaper changing tables for commercial use. It is intended for use with children up to 3.5 years of age and weighing less than 50 lbs. 1.3 No diaper changing table produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use

ASTM F406-22 非全尺寸婴儿床/游乐场的标准消费者安全规范

1.1 This consumer safety specification establishes testing requirements for structural integrity and performance requirements for non-full-size cribs/play yards, both rigid sided and mesh/fabric assemblies. It also provides requirements for labeling and instructional material. The term unit or product will refer to a non-full-size crib/play yard. 1.2 This specification covers a framed enclosure with a floor made for the purpose of providing sleeping or playing accommodations, or both, for a child who cannot climb out and is less than 35 in. (890 mm) in height. It also covers bassinet, changing table, or similar accessories to a non-full size crib/play yard. These accessories shall also comply with the applicable requirements of ASTM standards addressing those accessories. For example, a changing table that attaches to a play yard shall also comply with the applicable requirements in Specification F2388. This specification does not cover inflatable products. 1.3 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—This consumer safety specification includes the following sections: Title Section Scope 1 Referenced Documents 2 ASTM Standards 2.1 EN Standards 2.2 ISO Standards 2.3 Federal Regulations 2.4 Terminology 3 Definitions of Terms Specific to This Standard 3.1 Accessory 3.1.23 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.18 on Cribs, Toddler Beds, Play Yards, Bassinets, Cradles and Baby Changing Products. Current edition approved Oct. 1, 2022. Published November 2022. Originally approved in 1977. Last previous edition approved in 2019 as F406 – 19. DOI: 10.1520/F0406-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Accessory Attachment Components 3.1.1 Bassinet/Cradle Accessory 3.1.2 Cantilevered Accessory 3.1.3 Conspicuous 3.1.4 Cord 3.1.5 Corner Post 3.1.6 Dropgate 3.1.7 Dynamic Load 3.1.8 Fabric 3.1.9 Foldable Side or End 3.1.10 Key Structural Elements 3.1.11 Manufacturer’s Recommended Use Position 3.1.12 Mattress 3.1.13 Mattress Support Surface 3.1.14 Mesh 3.1.15 Mesh/Fabric Unit 3.1.16 Moveable Side 3.1.17 Non-Full-Size Crib 3.1.18 Non-paper Label 3.1.19 Occupant 3.1.20 Paper Label 3.1.21 Play Yard 3.1.22 Protrusion 3.1.24 Rigid Sided Product 3.1.25 Seam 3.1.26 Static Load 3.1.27 Stationary Side 3.1.28 Strap 3.1.29 Structural Failure 3.1.30 Calibration and Standardization 4 General Requirements 5 Corner Posts 5.1 Scissoring, Shearing, or Pinching 5.6 Latching and Locking Mechanisms 5.8 Openings 5.9 Protective Components 5.10 Labeling 5.11 Stability 5.12 Cords/Straps 5.13 Coil Springs 5.14 Entrapment in Accessories 5.15 Mattress 5.16 Mattresses for Rigid Sided Products 5.17 Protrusions 5.18 Bassinet/Cradle Accessories – Missing Accessory Attachment Components 5.19 Record Keeping 5.20 Performance Requirements for Rigid Sided Products 6 Crib-Side Height 6.2 Spacing of Unit Components 6.3 Hardware 6.4 Fasteners 6.5 Construction and Finishing 6.6 Requirements for Cutouts 6.7 Plastic Teething Rail 6.10 Cyclic Test 6.11 Side(s) or End(s) Latch Testing, or Both 6.12 Dropgate or Other Moveable Side Latch Testing 6.12.1 Foldable Side or End Latch Testing 6.12.2 Mattress Support System Vertical Impact Test Requirements 6.13 Mattress Support System Testing 6.14 Crib Side Test Requirements 6.15 Spindle/Slat Strength Testing 6.16 Performance Requirements for Mesh/Fabric Products 7 Height of Sides 7.2 Side Deflection and Strength 7.3 Floor Strength 7.4 Top Rail Covering Material 7.5 Mesh Requirements 7.6 Mesh Openings 7.6.1 Mesh Strength 7.6.2 Fabric Material Requirements 7.7 Fabric Strength 7.7.1 Mesh/Fabric Assembly Requirements 7.8 Sewn Assembly 7.8.1 Seam Strength 7.8.2 Mesh/Fabric Attachment Strength 7.8.3 Mattress Vertical Displacement 7.9 Top Rail Configuration 7.10 Top Rail to Corner Post Attachment 7.11 Test Methods 8 Component Spacing Test Apparatus 8.1 Component-Spacing Test Method 8.2 Test Requirements for Cutouts 8.3 Plastic Teething Rail Test for Rigid Sided Products 8.4 Cyclic Test 8.5 Side or End Latch Test, or Both, for Rigid Sided Products 8.6 Movable Side Latch Tests 8.6.3 Hinged Drop Gate Latch Test 8.6.4 Test Procedure for Latches to Prevent Folding of a Foldable Side or End 8.6.5 Mattress Support System Vertical Impact Test for Rigid Sided Products 8.7 Mattress Support System Test for Rigid Sided Products 8.8 Crib Side Test 8.9 Crib Side Cyclic Tests 8.9.4 Crib Side Static Test 8.9.5 Crib Side Spindle/Slat Torque Test 8.9.6 Spindle/Slat Static Load Strength 8.10 Side Deflection and Strength Tests for Mesh/Fabric Products 8.11 Floor Strength Test for Mesh/Fabric Products 8.12 Locking Mechanism Test 8.13 Dropgate Locking Device Test Method 8.13.1 Folding Latch Test Method 8.13.2 Mesh Opening Test 8.14 Test for Strength of Mesh and Integrity of Attachment 8.15 Mesh/Fabric Attachment Strength Test Method 8.16 Test for Stability of Product 8.17 Permanency of Labels and Warnings 8.18 Removal of Protective Components 8.21 Torque Test 8.21.3 Tension Test 8.21.4 Vinyl Thickness Measurement 8.22 Test for Attachment of Storage Pouch or Other Parts with Printed Warnings 8.23 Cords/Straps Test Methods 8.24 Protrusions 8.25 Entrapment Tests 8.26 False Latch 8.27 Mattress Vertical Displacement Test 8.28 Top Rail Configuration Test 8.29 Minimum Space when Folded 8.29.1 Top Rail V-Shape Configuration Test 8.29.2 Top Rail to Corner Post Attachment Test 8.30 Load Application Procedure 8.30.3 Bassinet and Cradle Accessory – Sleep Surface Collapse/Tilt 8.31 Marking and Labeling 9 Labeling 9.1 Warning Statements 9.2 Instructional Literature 10 Warning Statements 10.1.2 Water Mattress Use 10.3.3 Keywords 11 Design Guidelines for Protrusions Annex A2 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the F406 − 22 2 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards

T/HBBSPA 001-2022 自行车-儿童自行车安全要求

本标准主要对儿童自行车的结构、强度、材质（有毒有害物质管控）等方面进行要求。

Bicycles - Safety Requirements for Children's Bicycles

BS EN 1888-1:2018+A1:2022 儿童护理用品 轮式儿童交通工具 折叠式婴儿车和婴儿车

This document specifies the safety requirements and test methods for pushchairs and prams, designed for the carriage of one or more children, up to 15 kg each and up to 20 kg for any integrated platform on which a child can stand. This document does not cover toys, baby carriers fitted with wheels; pushchairs and prams propelled by a motor and pushchairs and prams designed for children with special needs. Where a pushchair or pram or any part of the pushchair or pram has several functions or can be converted into another function it is due to comply with relevant standard(s).

Child care articles. Wheeled child conveyances - Pushchairs and prams

22/30443380 DC BS EN 1888-3 带轮儿童交通工具 第3部分：用于体育活动的较重儿童的婴儿车

BS EN 1888-3. Wheeled child conveyances - Part 3. Pushchairs for heavier children intended for sport activities

ASTM F977-22e1 婴儿步行器的标准消费者安全规范

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of the infant walker (see 3.1). 1.2 This consumer safety specification is intended to minimize accidents to children resulting from normal use and reasonably foreseeable misuse or abuse of walkers. 1.3 No walker produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of other persons with the child in the walker or the accidents resulting from abuse and misuse by children able to walk. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.6 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Walkers