97.220.10 标准查询与下载

ASTM F3383-19a 合成草皮中单根纤维的纤维粘合的标准试验方法

1.1 This test method applies to tufted synthetic turf produced with at least one bundle of monofilament fibers. 1.2 This test method is applicable to laboratory testing (Method A), and for testing of installed turf (Method B). 1.3 The results from this test method provide an indication of the resistance to single fiber loss during installation or end use applications of the synthetic turf. 1.4 All values stated in inch-pound units are to be regarded as standard; the values in SI units are provided as information only and are not exact equivalents. In case of reference decisions, the inch-pound units shall prevail. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf

ASTM F2223-19a ASTM标准游乐场表面标准指南

1.1 This guide covers standards for selecting and specifying surface systems under and around playground equipment. 1.2 This guide describes how to apply existing ASTM standards to evaluate the impact attenuation, accessibility characteristics and product characteristics when selecting surfacing systems for use under and around playground equipment. 1.3 This guide does not imply that an injury cannot be incurred when the surface system complies with standards referred to in this guide. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercurycontaining products, or both, in your state may be prohibited by state law. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for ASTM Standards on Playground Surfacing

ASTM F2772-11(2019) 室内运动场地系统运动性能特征标准规范

1.1 This specification establishes levels for athletic performance properties of multi-purpose indoor sports floor systems excluding turf and materials specific to running tracks and tennis courts. 1.2 The methods described are applicable in both the laboratory and field unless otherwise stated. 1.3 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems

ASTM F2747-19 高尔夫推杆果岭和发球台用砂基根区的建造标准指南

1.1 This guide covers techniques that are appropriate for the construction of high performance sand-based rootzones for golf greens and tees. This guide provides guidance for the selection of materials, including soil, sand, gravel, peat, etc., for use in designing and constructing sand-based golf turf rootzones. 1.2 Decisions in selecting construction and maintenance techniques are influenced by existing soil types, climatic factors, level of play, intensity and frequency of use, equipment available, budget and training, and the ability of management personnel. 1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees

ASTM F1777-19 彩弹游戏现场操作的标准实施规程

1.1 This practice establishes minimum safety requirements for the operation of paintball playing game sites, and provides for certain materials and procedures required. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Paintball Game Site Operation

ASTM F2898-11(2019) 非限制区域洪水试验方法合成草坪运动场基础石材和表面系统渗透性的标准试验方法

1.1 This test method may be used to determine the permeability rate of synthetic turf playing field systems, playing field systems with pad or premolded drainage boards, or both, playing field systems with premolded panel base systems, porous and non porous pavement systems, or base stone systems in the field, or a combination thereof, by non-confined area flood test method. This system is suitable for use on the finish synthetic turf playing surface and on the stone base system below the playing system. 1.2 This test method is applicable for synthetic turf playing field systems and stone bases where system is designed for permeability through the synthetic turf surface and or through a base stone surface. It is also suitable for synthetic turf playing systems that are directly underlined with resilient and nonresilient pre-molded drainage boards systems and porous pavement base systems. The method tests a larger surface area than confined ring test methods and decreases the effect lateral flow within the surface and or stone base system due to the large increase in the ratio of test surface area to the synthetic turf playing system and stone base system thickness. The method is intended to more accurately mimic natural storm flow conditions by eliminating the effect of head pressure created by the water column height which creates a pressure flow condition at the surface of the test area that does not exist naturally. 1.3 This test method is intended for finish-graded and compacted stone or finished surfaces that are installed with cross-slope gradients of less than 2.0 % or under conditions where the effect of cross-slope is mitigated by high system permeability. High sloping systems tend to have high sloping base systems which may impact results due to increases in the lateral flow within the section caused increased hydraulic energy caused by larger slopes. 1.4 This test method is not applicable for conditions or locations in-which surface flow, due to high surface cross-slope or proximity, carries water flow from the test site to surface and subsurface drainage trenches or structures. 1.5 Further, this test method may be impacted if preformed directly after a significant rainfall event in cases where the downstream capacity of the receiving drainage system is taxed to the extent that water backs up in the downstream system. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method

DB37/T 2905-2019 运动场地合成材料面层 施工要求

Requirements for the construction of synthetic material surfaces for sports venues

DB37/T 2906-2019 运动场地合成材料面层 验收要求

Requirements for acceptance of synthetic material surfaces for sports venues

DB37/T 2904-2019 运动场地合成材料面层 原材料使用规范

Specifications for the use of raw materials for synthetic material surfaces in sports venues

DB37/T 3679-2019 合成材料面层健身步道技术要求

Technical requirements for fitness walkways with synthetic material surfaces

DB37/T 2907-2019 运动场地合成材料面层 维护保养指南

Guidelines for Maintenance of Synthetic Surfaces for Sports Fields

DB44/T 2162-2019 温泉服务质量监测规范

本标准规定了温泉企业服务质量的监测对象、监测方法和监测数据计算。 本标准适用于温泉服务质量监测。

Hot spring service quality monitoring specification

DB44/T 297-2019 温泉服务 温泉沐浴服务要求

本标准规定了温泉沐浴服务的总则、一般要求、温泉沐浴服务功能区要求、服务人员要求、服务质量监测与持续改进要求。 本标准适用于温泉沐浴服务。

Hot Spring Service Hot Spring Bathing Service Requirements

ASTM F2223-19 ASTM标准游乐场表面标准指南

Standard Guide for ASTM Standards on Playground Surfacing

ASTM F1936-19 田间测量的草坪播放系统的影响衰减标准规范

1.1 This specification establishes an in situ test method and maximum impact attenuation value for all types of turf playing systems and for a number of sport-specific field layouts. It also includes a protocol for determining test point locations on fields that are lined for multiple sports. 1.1.1 Turf playing systems may be located outdoors or indoors, and typically include field areas within the in-bounds lines and areas outside the in-bounds lines extending to sport-specific limit lines; areas where an athlete should expect to encounter impact attenuation performance that complies with this specification. 1.1.2 Site-specific conditions may exist wherein non-turf surface materials, such as track surfacing and/or covers over subsurface structures, are found within the boundaries of the limit lines. These alternate surface materials are not included in the scope of this specification. 1.2 This specification establishes a method for reporting test results and identifying areas within an existing turf playing system where impact attenuation measurements exceed required threshold values. 1.3 Nothing in this specification is intended to impose limitations on what fields can be tested, or how a particular field can be used. Test providers can adapt the procedures and guidelines contained herein to tests performed on any turf playing system. 1.4 This specification does not imply that an impact-related injury cannot be incurred if a turf playing system complies with its g-max performance requirement. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field

T/HSCA 001-2019 高等学校合成材料面层运动场地

合成材料面层的物理性能、化学性能、有害物质限量和挥发性有机物限量

Sports areas with synthetic surfaces for university

T/JYBZ 012-2019 学校人造草运动场地要求

包括学校人造草运动场地术语定义、分类和规格、技术要求、检验方法、检验规则和场地维护。

Requirements on synthetic turf sports grounds for schools

ASTM F3383-19 合成草皮中单根纤维的纤维粘合的标准试验方法

Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf

DB62/T 2989-2019 运动场地合成材料面层维护保养指南

Guidelines for Maintenance of Synthetic Surfaces for Sports Fields

DB62/T 2988-2019 运动场地合成材料面层原材料使用规范

Specifications for the use of raw materials for synthetic material surfaces in sports venues