97.220.10 标准查询与下载

PN-EN 13451-2+A1-2020-12 E 游泳池设备 第2部分：梯子、活梯和把手弯头的附加特定安全要求和测试方法

Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

ASTM F3496-20 人造草皮填充物中多环芳烃（PAH）含量的标准规范

1.1 This specification applies to the maximum content of eight PAHs (PAH8) in materials used as synthetic turf infill. 1.2 This specification outlines a test method for sample preparation and the method for analyzing the content of the eight PAHs in synthetic turf infill. 1.3 This specification provides guidelines for reporting the content of the eight PAHs in the synthetic turf infill. 1.4 This specification is applicable to any infill material used in synthetic turf. 1.5 The values stated in SI units are to be regarded as standard. No other units are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polyaromatic Hydrocarbon (PAH) Content in Synthetic Turf Infill

SN EN 13451-2+A1-2020 游泳池设备 第2部分：梯子、活梯和把手弯头的附加特定安全要求和测试方法

Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

DS/EN 13451-1:2020 游泳池设备 第1部分：安装在游泳池内供公众使用的设备的一般安全要求和试验方法

Swimming pool equipment – Part 1: General safety requirements and test methods for equipment installed in pools for public use

BS EN 13451-1:2020 游泳池设备. 泳池公用设备一般安全要求和试验方法

Swimming pool equipment. General safety requirements and test methods for equipment installed in pools for public use

NF S52-388-1:2020 游泳池设备. 第1部分: 泳池公用设备一般安全要求和试验方法

Domaine d'applicationLe présent document spécifie des exigences générales de sécurité et méthodes d'essai pour les équipements installés dans des piscines à usage public telles que classifiées dans l'EN 15288-1 et l'EN 15288-2.Lorsqu'il existe des normes spécifiques, la présente

Swimming pool equipment - Part 1 : general safety requirements and test methods for equipment installed in pools for public use

PN-EN 17409-2020-11 E 运动场表面 合成草坪表面使用的性能填充物取样实施规程

Surfaces for sports areas -- Code of practice for the sampling of performance infills used within synthetic turf surfaces

PN-EN 17326-2020-11 E 运动区域表面 运动系统中使用的减震垫尺寸稳定性的测定

Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems

PN-EN 1569-2020-11 E 运动场表面 滚动载荷下性能的测定

Surfaces for sports areas - Determination of the behaviour under a rolling load

PN-EN 17324-2020-11 E 运动区域表面 减震垫和运动表面抗动态疲劳性能测定的试验方法

Surfaces for sports areas - Test method for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces

PN-EN 1517-2020-11 E 运动场表面 抗冲击性的测定

Surfaces for sports areas - Determination of resistance to impact

ASTM F3189-20 使用先进人造运动员测量合成草坪系统的力减小 垂直变形和能量恢复的标准测试方法

1.1 This test method specifies a method for measuring force reduction, vertical deformation, and energy restitution of synthetic turf surfaces. 1.2 This method is used to characterize properties of synthetic turf systems including the turf fabric, infill material, and shock pad (if applicable). 1.3 It can be used for characterizing synthetic turf systems in laboratory environment or in the field. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete

SN EN 1569-2020 运动场表面 滚动载荷下性能的测定

Surfaces for sports areas - Determination of the behaviour under a rolling load

SN EN 1517-2020 运动场表面 抗冲击性的测定

Surfaces for sports areas - Determination of resistance to impact

SN EN 17324-2020 运动区域表面 减震垫和运动表面抗动态疲劳性能测定的试验方法

Surfaces for sports areas - Test method for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces

SN EN 17326-2020 运动区域表面 运动系统中使用的减震垫尺寸稳定性的测定

Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems

EN 13451-1:2020 泳池设备.第1部分:一般安全要求和试验方法

Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use

SN EN 17409-2020 运动场表面 合成草坪表面内使用的性能填充物取样实施规程

Surfaces for sports areas - Code of practice for the sampling of performance infills used within synthetic turf surfaces

ASTM F2461-20a 水上游乐设备制造 建造 操作和维护的标准实施规程

1.1 This practice covers information for manufacture, construction, operations and maintenance of aquatic play equipment and provides safety performance standards for various types of public aquatic play components and aquatic play composite structures. 1.2 Inclusions: 1.2.1 Climbable and climb-resistant aquatic play components, composite aquatic play structures, user controls, water sprays, fountains, and slides that occur on wet decks and wading, swimming or leisure pools. The play components specified herein occur for use in aquatic play areas. 1.2.2 Play equipment, fall zones, use zones for wet decks, wading pools, swimming pools and leisure pools. 1.2.3 This standard is intended to apply to Aquatic Play Equipment that is located in and around recirculated and potable water recreational facilities. Such facilities include but are not limited to amusement parks, theme parks, water parks, family entertainment centers, municipal swimming pools and municipal parks. 1.2.4 Waterslides 6 ft in height or smaller. 1.3 Exclusions: 1.3.1 Playground equipment that does not have an entry or an exit onto or into a wet deck, wading pool, swimming pool or aquatic recreation pool. 1.3.2 Home playground or home pool equipment or play equipment as scoped in Consumer Safety Performance Specification F1148-17 and ANSI/NSPI-5. 1.3.3 Waterslides as scoped in Practice F2376-17a. 1.3.4 Flotation devices used on water slides or in swimming pools. 1.3.5 Swimming pools as specified by ANSI/NSPI-1 or ANSI/IAF-9. 1.3.6 Products or facility elements specifically designed to provide access to and from pools for people with disabilities. 1.3.7 Water rides such as log flumes, raft rides, inner tube rides, waterslides or other attractions where the participant sits in a vehicle or is physically propelled or moved by or with water. 1.3.8 Sports equipment, fitness equipment, and diving equipment. 1.4 Compliance: 1.4.1 Where water is indirectly or directly added or applied to Consumer Safety Performance Specification F1487-17 play equipment, the equipment shall comply with this standard. Where a requirement for compliance to a section of the Consumer Safety Performance Specification F1487-17 standard is required by this standard, the section number is preceded with the standard’s designation. 1.4.2 Soft contained play structures with aquatic play components shall comply with Safety Performance Specification F1918-12 except as modified by this standard. 1.4.3 Aquatic play components and composite play structures represented, as complying with this safety performance standard shall meet all applicable requirements specified herein. Anyone representing compliance with this standard shall keep such essential records as are necessary to document any claim that the requirements within this standard have been met. 1.5 This standard includes the following sections: Scope Section 1 Referenced Documents Section 2 Terminology Section 3 Manufacturing and Materials Section 4 Design Section 5 Performance Requirements Section 6 Operator Responsibilities Section 7 Manufacturer/Designer Responsibilities Section 8 Installer Responsibilities Section 9 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. (The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.) 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the 1 This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.70 on Water Related Amusement Rides and Devices. Current edition approved Oct. 1, 2020. Published November 2020. Originally approved in 2009. Last previous edition approved in 2020 as F2461 – 20. DOI: 10.1520/F2461-20A. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment

ASTM F2461-20 水上游乐设备制造 建造 操作和维护的标准实施规程

Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment