A51 量和单位 标准查询与下载

ISO 80000-8:2007 量和单位.第8部分:声学

ISO 80000-8 gives names, symbols and definitions for quantities and units of acoustics. Where appropriate, conversion factors are also given.

Quantities and units - Part 8: Acoustics

ISO 80000-5:2007 量和单位.第5部分:热力学

ISO 80000-5 gives names, symbols and definitions for quantities and units of thermodynamics. Where appropriate, conversion factors are also given.

Quantities and units - Part 5: Thermodynamics

ISO/IEC GUIDE 99:2007 计量学的国际词汇.基本与一般概念与相关术语(VIM)

In this Vocabulary, a set of definitions and associated terms is given, in English and French, for a system of basic and general concepts used in metrology, together with concept diagrams to demonstrate their relations. Additional information is given in the form of examples and notes under many definitions. This Vocabulary is meant to be a common reference for scientists and engineers — including physicists, chemists, medical scientists — as well as for both teachers and practitioners involved in planning or performing measurements, irrespective of the level of measurement uncertainty and irrespective of the field of application. It is also meant to be a reference for governmental and intergovernmental bodies, trade associations, accreditation bodies, regulators, and professional societies. Concepts used in different approaches to describing measurement are presented together. The member organizations of the JCGM can select the concepts and definitions in accordance with their respective terminologies. Nevertheless, this Vocabulary is intended to promote global harmonization of terminology used in metrology.

International vocabulary of metrology - Basic and general concepts and associated terms (VIM)

ANSI/IEEE 270:2006 特别关注国际单位制(SI)用量、单位和相关术语的标准定义

Provides definitions for physical quantities and units commonly used in applied science and technology, and for related terms that concern systems of measurement. Particular emphasis is placed on the International System of Units (SI).

Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)

IEEE 270-2006 特殊关注的国际单位制(SI)选定数量、单位和相关术语的定义

Provides definitions for physical quantities and units commonly used in applied science and technology, and for related terms that concern systems of measurement. Particular emphasis is placed on the International System of Units (SI).

Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)

ISO 80000-4:2006 量和单位.第4部分:力学

ISO 80000-4 gives the names, symbols and definitions for quantities and units of classical mechanics. Where appropriate, conversion factors are also given.

Quantities and units - Part 4: Mechanics

ISO 80000-3:2006 量和单位.第3部分:空间和时间

ISO 80000-3 gives names, symbols and definitions for quantities and units of space and time. Where appropriate, conversion factors are also given.

Quantities and units - Part 3: Space and time

IEEE/ASTM SI 10/COR-2005 国际单位制(SI)使用:现代公制.勘误表

Use of the International System of Units (SI): The modern metric system; Errata

BS ISO 31-8:1992 量和单位.物理化学和分子物理学

This document is part 8 of ISO 31, which deals with the quantities and units in the various fields of science and technology.

Quantities and units - Physical chemistry and molecular physics

BS 350:2004 单位的换算因数

This standard provides conversion factors for units of measurement for a number of quantities, which are, or have been, in general use in engineering, industry and trade. The subjects covered are, broadly, metrology, mechanics and heat; the standard does not deal with purely electrical units. NOTE 1 SI units are normally recommended. However, in certain circumstances use of particular units is required by legislation. NOTE 2 Electrical and light units are given in BS 5775-5 and in BS 5775-6, respectively. NOTE 3 A commentary on imperial and metric systems of measurement and units is given in Annex A.

Conversion factors for units

ANSI/IEEE 260.1:2004 测量单位用字母符号(国际标准单位SI, 习惯用法单位 英寸-英磅,与某些其他单位)

Covers letter symbols for units of measurement.

Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)

DIN 1301-1:2002 单位.单位名称和符号

Units - Part 1: Unit names, unit symbols

JIS Z 8202-0 ERRATUM 1:2002 量值和单位.第0部分:总则(勘误1)

Quantities and units -- Part 0: General principles (Erratum 1)

ASTM SI10-02 国际单位制使用的IEEE/ASTM SI-10标准:现代米制系统

Guidance for the use of the modern metric system is given. Known as the International System of Units (abbreviated SI), the system is the bases for worldwide standardization of measurement units. Information is included on SI, a list of units recognized for use with SI, and a list of conversion factors, together with general guidance on proper style and usage.

IEEE/ASTM SI 10 American National Standard for Use of the International System of Units (SI): The Modern Metric System

JJG(民航) 0062-2001 AN60-5型飞机称重平台

AN60-5 Portable Aircraft Weighing Platform

JJG(民航) 0063-2001 风挡加温系统测试装置

Windshield Heater System Test Set

AIA/NAS NASM14191-2001 FSC 53一般用途Rev. 2凹槽计量器及驱动器棱纹尺寸十字形偏差计量器

THE SPECIFIC PART STANDARD OR DRAWNG WHICH SPECIFIES THIS RECESS DRIVE BY REFERENCING THIS DOCXMENT SHALL SPEClM VALUES FOR DIMENSIONS J. W. T. AND DEPTH OF GAGE PENETRATION. IF THE VALUES SPECIFIED HEREIN ARE NOT COMPATIBLE WTH THE PART CONFIGURATION OR PERFORMANCE REQUIREMENTS.

Recess - Offset Cruciform, Ribbed Dimensions of Recess, Gage and Driver for Rev 2

JIS Z 8202-6:2000 量值和单位.第6部分:光学和相关电磁辐射

この規格は，光及び関連する電磁放射に関する量並びに単位の名称及び記号について規定する。

Quantities and units -- Part 6: Light and related electromagnetic radiations

JIS Z 8202-7:2000 量值和单位.第7部分:声学

この規格は，音に関する量並びに単位の名称及び記号を規定する。

Quantities and units -- Part 7: Acoustics

JIS Z 8202-8:2000 量值和单位.第8部分:物理化学和分子物理学

この規格は，物理化学及び分子物埋学に関する量並びに単位の名称及び記号について規定する。

Quantities and units -- Part 8: Physical chemistry and molecular physics