A78 精密工程与地籍测绘 标准查询与下载

CH/T 6001-2014 城市建设工程竣工测量成果规范

Specifications for completion survey results of urban construction projects

CH/T 5004-2014 地籍图质量检验技术规程

本标准规定了地籍图质量检验的基本要求、检验内容及方法、工作流程、检验前准备、抽样、质量检验、质量评定、报告编制和资料整理等内容。 本标准适用于数字、模拟地籍图质量的检验。

Technical specifications for quality inspection and acceptance of cadastral map

CFR 48-52.236-2014 联邦采购法规体系. 第52部分:招标规定和合同条款. 第52.2子部分:合同文本及条款要求. 第52.236节:1-28.

The Contractor shall perform on the site, and with its own organization, work equivalent to at least lll [insert the appropriate number in words followed by numerals in parentheses] percent of the total amount of work to be performed under the contract. This percentage may be reduced by a supplemental agreement to this contract if, during performing the work, the Contractor requests a reduction and the Contracting Officer determines that the reduction would be to the advantage of the Government. The Contractor shall promptly, and before the conditions are disturbed, give a written notice to the Contracting Officer of (1) subsurface or latent physical conditions at the site which differ materially from those indicated in this contract, or (2) unknown physical conditions at the site, of an unusual nature, which differ materially from those ordinarily encountered and generally recognized as inhering in work of the character provided for in the contract.

Federal acquisition regulations system. Part52:Solicitation provisions and contract clauses. Subpart52.2:Text of provisions and clauses. Section52.236 1-28.

CH/T 1031-2012 新农村建设测量与制图规范

Specifications for surveying and drawing of new rural construction

DLA A-A-52001 VALID NOTICE 3-2007 带三脚架和携带盒测量用平板仪测量

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASE

ANSI/INCITS/ISO 19106:2004 地理信息.第6部分:轮廓

This International Standard is intended to define the concept of a profile of the ISO geographic information standards developed by ISO/TC 211 and to provide guidance for the creation of such profiles.

Geographic information - Part 6: Profiles

DLA A-A-52001 VALID NOTICE 2-2001 带三脚架和携带盒测量用平板仪测量

A-A-52001, dated 25 June 1993, has been reviewed and determined to be valid for use in acquistion.

PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASE

BS ISO 11928-2:2000 缩微摄影技术.图形COM记录器的质量控制.质量标准和控制

Methods for measuring frame size, resolution, radial recording and curved lines, with advice on checking line density and character display and rotation

Micrographics - Quality control of graphic COM recorders - Quality criteria and control

BS ISO 12645:1998 制图技术.过程控制.透射密度计在不透明区校准用的检定参照样

This International Standard defines requirements for a half-tone certified reference material which may be used for the opaque area percentage calibration of transmission densitometers or colorimeters for use in the graphic arts. This International Standard is not applicable to the calibration of transmission densitometers in terms of ISO standard diffuse density. NOTE Test methods for determining the opaque area percentage are given in the informative annex A.

Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers

BS ISO 12645:2000 制图技术.过程控制.透射密度计在不透明区校准用的检定参照样

This International Standard defines requirements for a half-tone certified reference material which may be used for the opaque area percentage calibration of transmission densitometers or colorimeters for use in the graphic arts. This International Standard is not applicable to the calibration of transmission densitometers in terms of ISO standard diffuse density. NOTE Test methods for determining the opaque area percentage are given in the informative annex A.

Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers

CH 5002-1994（说明） 地籍测绘规范

Cadastral Surveying and Mapping Specifications

CH 5002-1994 地籍测绘规范

本标准规定了不动产地籍测绘的基本内容与要求。 本标准适用于全国城镇地区和独立工矿区的地籍测绘。农村居民区的地籍测绘亦可参照执行。

Specifications for cadastral Surveying and Mapping

DLA A-A-52001 VALID NOTICE 1-1993 带三脚架和携带盒测量用平板仪测量

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASE

DLA A-A-52001-1987 带三脚架和携带盒测量用平板仪测量

The General Services Administration has authorized the use of this commercial item description in preference to Military Specification XIL-P-10813E.

PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASE

DIN 18709-2:1986 测量概念、缩写和符号.第2部分:工程测量

Concepts, abbreviations and symbols in surveying; surveying by the engineer

CH/T 2006-1999 水准测量电子记录规定

本标准规定了使用可编程序的记录器〔含电子计算器、电子计算机)进行水准测量记录时必须记录的信息项目、数据处理方法以及成果输出格式。适用于国家一、二、三、四等水准测量电子记录。

Regulations on Electronic Records of Level Surveying

CH/T 2005-1999 三角测量电子记录规定

本标准规定了使用可编程序的电子记录器(含电子计算器和电子计算机)进行三角侧量观测记录时测量信息的编码，数据处理的方法，输人、输出信息的内容和格式等。 本标准适用于国家一、二、三、四等三角测量以及其他水平角和垂直角观测的电子记录。 本标准同有关测量标准和ZBA 76003-87(测量外业电子记录基本规定》(本标准中简称《基本规定》)同时执行。

Triangulation Electronic Record Regulations

CH/T 2004-1999 测量外业电子记录基本规定

本标准规定了使用可编程序的电子记录器(含电子计算器、电子计算机)进行测量外业记录的基本原则和方法。 本标准适用于大地测量、各种控制测量以及其他有关测量的外业电子记录。 本标准应与各有关测量标准一起使用。

Basic Regulations on Electronic Records in the Field of Surveying