A94 警用装备与器械 标准查询与下载

GA 1052.3-2013 警用帐篷 第3部分:24 m2单帐篷

GA 1052的本部分规定了警用24 m单帐篷的代号、要求、试验方法、检验规则及标志、包装、运输与贮存。本部分适用于以深蓝色涤纶涂层牛津布为面料缝制的篷体,与以焊接钢管为框架组合而成的警用24 m单帐篷的生产、检验与订购。

Police tents.Part 3: 24 m² unlined tent

GA 1052.1-2013 警用帐篷 第1部分:12m2单帐篷

GA 1052的本部分规定了警用12 m单帐篷的代号、要求、试验方法、检验规则及标志、包装、运输与贮存。本部分适用于以深蓝色涤纶涂层牛津布为面料缝制的篷体,与以焊接钢管为框架组合而成的警用12 m单帐篷的生产、检验与订购。

Police tents.Part 1: 12 m² unlined tent

GA 1052.7-2013 警用帐篷 第7部分:厕所帐篷

GA 1052的本部分规定了警用厕所帐篷的代号、要求、试验方法、检验规则及标志、包装、运输与贮存。本部分适用于以深蓝色涤纶涂层牛津布为面料缝制的篷体,与以焊接钢管为框架组合而成的警用厕所帐篷的生产、检验与订购。

Police tents.Part 7: Toilet tent

GA 1052.4-2013 警用帐篷 第4部分:24m2棉帐篷

GA 1052的本部分规定了警用24 m棉帐篷的代号、要求、试验方法、检验规则及标志、包装、运输与贮存。本部分适用于以深蓝色涤纶涂层牛津布为面料、中空纤维针刺毡为保温材料、涤纶阻燃牛津布为里布缝制的篷体，与以焊接钢管为框架组合而成的警用24m棉帐篷的生产、检验与订购。

Police tents.Part 4: 24m² thick tent

GA 1052.2-2013 警用帐篷 第2部分:12m2棉帐篷

GA 1052的本部分规定了警用12 m棉帐篷的代号、要求、试验方法、检验规则及标志、包装、运输与贮存。本部分适用于以深蓝色涤纶涂层牛津布为面料、中空纤维针刺毡为保温材料、涤纶阻燃牛津布为里布缝制的篷体,与以焊接钢管为框架组合而成的警用12 m棉帐篷的生产、检验与订购。

Police tents.Part 2: 12 m² thick tent

GA 1042-2013 警用电源车

本标准规定了警用电源车的术语和定义、分类和代号、技术要求、试验方法、检验规则、标志、运输与贮存。本标准适用于汽车整车或二类底盘改装的输出工频(50 Hz)三相交流电的警用电源车。

Police power generating vehicle

GA 1033-2013 公安监管场所装备建设和保障规范

本标准规定了公安监管场所装备建设和保障工作的基本要求。本标准适用于公安监管场所装备的规划、建设、使用、维护、保障和管理工作。

Specifications for the construction and provision of penitentiary facilities

GA 293-2012 警用防弹头盔及面罩

本标准规定了警用防弹头盔及面罩产品的术语和定义、分类和代号、技术要求、试验方法、检验规则、质量保证规定及包装、运输和贮存。 本标准适用于警用放弹头盔及面罩。

Police ballistic helmets and face shields

GA 294-2012 警用防暴头盔

本标准规定了警用防暴头盔产品的术语和定义、分类和代号、技术要求、试验方法、检验规则、质量保证规定、包装、运输和贮存。 本标准适用于警用防暴头盔。

Police anti-riot helmets

GA 996-2012 警力输送车

本标准规定了警力输送车的术语和定义、分类与代号、技术要求、试验方法、检验规则、标志、运输和 贮存。 本标准适用于客车整车或客车底盘改装的警力输送车。

Police carrier vehicle

GA 997-2012 警用宿营车

本标准规定了警用宿营车的术语和定义、分类与代号、技术要求、试验方法、检验规则、标志、运输和贮存。 本标准适用于汽车整车或二类底盘改装的警用宿营车。

Police camping vehicle

GA 975-2012 特种警用装备名词术语

本标准规定了特种警用装备术语及其定义。 本标准适用于特种警用装备的科研、生产、检验、管理、使用、维护和教学等工作。

Nomenclature and terminology of special police equipment

ASTM F2322-12 拘留和教养设施用垂直固定障碍身体攻击的标准试验方法

A major concern for administrative officials is the security of barriers used in detention/correctional facilities. These test methods are designed to aid in identifying levels of physical security for walls which enclose or separate secure areas. This does not apply to the passage of contraband. These test methods are not intended to provide a measure of resistance for a wall subjected to attack by corrosive agents, by high-powered rifles, explosives, sawing, or other such methods. These test methods are intended to evaluate the resistance of a wall to violent attacks by sustained manpower using battering devices, such as benches, bunks, or tables, and by handguns up to and including .44 magnum. Attacks from the outside and fire resistance ratings are not addressed in this standard. The primary purpose or result of these test methods is to approximate the levels of abuse to which walls will potentially be subjected in the field. The desired result of its use is to help provide assurance of protection to the public, to facility administrative personnel, and to the inmates themselves. It is recommended that detention/correctional facility administration provide adequate training, supervision, and preventative maintenance programs to enable walls to function as intended throughout the expected service life.1.1 These test methods cover requirements for simulated service tests and testing equipment for determining the performance characteristics of walls designed to incarcerate inmates in detention and correctional institutions. The testing equipment provides for the setup and testing of two sample fixed barriers side-by-side, one with no openings and one equipped with a representative penetration in accordance with the American Correctional Association (ACA) standard for clear view area of 3 ft2 (0.279 m2), 12 in. (305 mm) wide by 36 in. (914 mm) high. 1.2 It is the intent of these test methods to help ensure that detention security walls perform at or above minimum acceptable levels to control passage of unauthorized or secure areas, to confine inmates, to delay and frustrate escape attempts, and to resist vandalism. It is recognized that in order to meet the intent of these test methods, opening assemblies within these walls must be compatible with the level of performance required by: Test Methods F1450, F1592, and F1643. 1.3 These test methods apply to walls enclosing or separating secure areas of detention/correctional facilities. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are approximate and for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

ASTM F1450-12a 拘留和教养设施用空心金属转动门组合件的标准试验方法

A major concern for prison administrative officials is security barriers used in detention/correctional facilities. These test methods are designed to aid in identifying levels of physical security for swinging detention hollow metal door assemblies. The construction and size of test doors and all hardware components are representative of the application under investigation, and are the same construction and size throughout all of the tests. These test methods are not intended to provide a measure of resistance for a door assembly subjected to attack by corrosive agents, by high-powered rifles, explosives, sawing, or other such methods. These test methods are intended to evaluate the resistance of a door assembly to violent attacks using battering devices, such as benches, bunks, or tables; by handguns up to and including .44 magnum, UL-752 Level 3; by prying devices; by devices used to deform the door and render it inoperable; and by fires started by using mattresses, books, and other flammable materials. The primary purpose or result of these test methods is to approximate the levels of abuse to which door assemblies are potentially subjected in the field. The desired result of its use is to help provide insurance of protection to the public, to facility administrative personnel, and to the inmates themselves. It is recommended that detention/correctional facility administration provide adequate training, supervision, and preventative maintenance programs to enable door assemblies to function as intended throughout the expected service life.1.1 These test methods cover requirements for mechanical tests, simulated service test, and testing equipment for determining the performance characteristics of swinging detention hollow metal door assemblies of various styles and types of construction for use in wall openings designed to incarcerate inmates in detention/correctional institutions. 1.2 These test methods test the capability of a swinging door assembly to prevent, delay, and frustrate escape, to limit or control access to unauthorized or secure areas, and to resist common types of vandalism. 1.3 These test methods apply primarily to detention door assemblies to and from secure areas generally found inside detention/correctional facilities, such as: day rooms, control rooms, cells, and sally ports. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

ASTM F1450-12 拘留装置用空心金属转动门组合件的标准试验方法

A major concern for prison administrative officials is security barriers used in detention/correctional facilities. These test methods are designed to aid in identifying levels of physical security for swinging detention hollow metal door assemblies. The construction and size of test doors and all hardware components are representative of the application under investigation, and are the same construction and size throughout all of the tests. These test methods are not intended to provide a measure of resistance for a door assembly subjected to attack by corrosive agents, by high-powered rifles, explosives, sawing, or other such methods. These test methods are intended to evaluate the resistance of a door assembly to violent attacks using battering devices, such as benches, bunks, or tables; by handguns up to and including .44 magnum, UL-752 Level 3; by prying devices; by devices used to deform the door and render it inoperable; and by fires started by using mattresses, books, and other flammable materials. The primary purpose or result of these test methods is to approximate the levels of abuse to which door assemblies are potentially subjected in the field. The desired result of its use is to help provide insurance of protection to the public, to facility administrative personnel, and to the inmates themselves. It is recommended that detention/correctional facility administration provide adequate training, supervision, and preventative maintenance programs to enable door assemblies to function as intended throughout the expected service life.1.1 These test methods cover requirements for mechanical tests, simulated service test, and testing equipment for determining the performance characteristics of swinging detention hollow metal door assemblies of various styles and types of construction for use in wall openings designed to incarcerate inmates in detention/correctional institutions. 1.2 These test methods test the capability of a swinging door assembly to prevent, delay, and frustrate escape, to limit or control access to unauthorized or secure areas, and to resist common types of vandalism. 1.3 These test methods apply primarily to detention door assemblies to and from secure areas generally found inside detention/correctional facilities, such as: day rooms, control rooms, cells, and sally ports. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

GA 950-2011 防弹材料及产品V50试验方法

本标准规定了对防弹材料及产品的弹道极限V50进行评价的技术要求、试验方法、V50值计算与修正、实验报告的编写等。 本标准适用于各种防弹材料及产品弹道极限V50的测试与评定。

V50 test method for ballistic materials and products

GA 949-2011 警用液压自动路障车

本标准规定了警用液压自动路障车的术语和定义、分类和代号、要求、试验方法、检验规则及标志、运输和贮存。 本标准适用于汽车整车或二类底盘改装的警用液压自动路障车。

Police hydraulic automatic road-block vehicle

GA 948-2011 警用攀登突击车

本标准规定了警用攀登突击车的术语和定义、分类和代号、要求、试验方法、检验规则及标志、运输和贮存。 本标准适用于汽车整车或二类底盘改装的警用攀登突击车。

Police climbing assault vehicle

BS EN 15964:2011 除一次性使用装置外的呼吸中酒精检测系统.要求和试验方法.

This European Standard applies to breath alcohol test devices which measure the concentration of alcohol contained in an exhaled breath sample intended to be used for screening or preliminary testing. This standard specifies requirements for basic safety and performance, test methods and requirements for marking, labelling and operating instructions. This standard gives guidelines for type approval procedure consisting of a number of technical performance tests, but excluding in vivo tests, that are carried out on devices supplied by the manufacturers. In vivo tests, which are designed to test the ability of the device to work with real subjects, may be arranged in compliance with national requirements. This standard is not applicable to devices covered by OIML R 126:1998 (Evidential breath analyzers) or single use testers. Devices are designed for law enforcement.

Breath alcohol test devices other than single use devices. Requirements and test methods

GA 923-2011 公安特警专用车辆外观制式涂装规范

本标准规定了公安特警专用车辆外观制式的涂装式样、涂装要素、涂装要求、试验方法、检验规则。 本标准适用于公安特警专用车辆外观制式的涂装和检验。

Specification of special police vehicle unified appearance coating