B69 木材加工材 标准查询与下载

CFR 7-1217.41-2013 农业. 第1217部分:软木材研究,推广,消费者教育和行业信息. 第1217.41节:提名和任命.

(a) Initial nominations will be sub-mitted to the Secretary by the Blue Ribbon Commission. Before consid-ering any nominations, the BRC shall publicize the nomination process, using trade press or other means it deems ap-propriate, and shall outreach to all known manufacturers for the U.S. mar-ket who domestically manufacture and/ or import 15 million board feet or more of softwood lumber per fiscal year in order to generate nominees that reflect the different operations within the softwood lumber industry. The BRC may use regional caucuses, mail or other methods to elicit potential nomi-nees. The BRC shall submit the nomi-nations to the Secretary and rec-ommend two nominees for each Board position specified in paragraphs (b)(1), (b)(2)(i) and (b)(2)(ii) of § 1217.40. All nominees solicited pursuant to § 1217.40(b)(2)(iii) shall be submitted to the Secretary through the BRC. From the nominations submitted by the BRC, the Secretary shall select the members of the Board.

Agriculture. Part1217:Softwood lumber research, promotion, consumer education and industry information order. Section1217.41:Nominations and appointments.

KS F 3021-2013 结构用集成材料

이 표준은 구조용 집성재(이하 집성재라 한다.)에 대하여 규정한다.

Structural glued laminated timber

KS F 3020-2013 结构用针叶树木材

이 표준은 설계값이 필요한 구조용으로 사용되는 침엽수 구조용재에 대하여 규정한다.

Softwood structural lumber

KS F 3005-2013 加压式杂酚油防腐处理枕木

이 표준은 목침목(이하 침목이라 한다.)의 썩음을 방지하기 위하여, 가압에 의해 크레오소트유로 방부처리한 침목에 대하여 적용한다.

Crossties treated with creosote oil by pressure processes

NF B53-675:2013 实心木质镶板和贴面层. 特征, 合格评估和标记

Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking

DIN EN 336:2013 结构木材.尺寸和允许偏差.德文版本EN 336-2013

Structural timber - Sizes, permitted deviations; German version EN 336:2013

BS EN 336:2013 结构木材. 尺寸, 允许偏差

Structural timber. Sizes, permitted deviations

LY/T 2228-2013 轻型木结构 结构用指接规格材

本标准规定了轻型木结构-结构用指接规格材的术语、定义和代号、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于轻型木结构中的结构用指接规格材。

Finger jointed structural dimension lumber in light wood frame construction

LY/T 1317-2013 栓皮

本标准规定了栓皮的技术要求、检测方法、检验规则、包装、贮存与标志等。本标准适用于中国栓皮栎。由栓皮栎枝、干采剥下来的初生和次生栓皮是制造软木制品的原料。

Cork

LY/T 2229-2013 木质相框

本标准规定了木质相框的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于室内干燥环境使用的木质相框。

Wooden photo frame

DIN EN 1912:2013 结构木材.强度等级.目测等级评定及分类.德文版本EN 1912-2012+AC-2013

Structural timber - Strength classes - Assignment of visual grades and species; German version EN 1912:2012 + AC:2013

ISO 18776:2008/Amd 1:2013 单板层积材(LVL).规格.修改件1

Laminated veneer lumber (LVL) - Specifications; Amendment 1

EN 14080:2013 木结构 胶合层压木和胶合实木 要求

This European Standard sets the performance requirements of the following glued laminated products: Glued laminated timber (glulam); Glued solid timber; Glulam with large finger joints; Block glued glulam for use in buildings and bridges. It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products. This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive). It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply. This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm. This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm. This European Standard is applicable for block glued glulam having solid rectangular cross sections. This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.

Timber structures - Glued laminated timber and glued solid timber - Requirements

DIN EN 335:2013 木材和木制品的耐久性.使用等级:实心木材及木质产品的应用、定义.德文版本EN 335-2013

Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products; German version EN 335:2013

NF B50-100*NF EN 335:2013 木材和木制品的耐久性.使用等级:实心木材及木制品的应用、定义

Durability of wood and wood-based products - Use classes : definitions, application to solid wood and wood-based products

BS EN 1316-2:2012 硬木圆形木材.定性分类.白杨木

Hardwood round timber. Qualitative classification. Poplar

BS EN 335:2013 木材和木制产品耐久性.使用级别:定义,实木和基于木材产品的应用

Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products

NF B52-001-2/A1:2013 结构物中木材使用的管理规则,结构体所用法国软木和硬木树种的目测分类.第2部分:制造木料胶合板BLC和胶合实心板BMR所用的整体木材的替代方法

Regulations governing the use of timber in structures - Visual classification for the use of french softwood and hardwood species in structure - Part 2: alternative method for massive wood used for manufacturing glued laminated timber BLC and glued solid

NF B52-001-1/A1:2013 结构物中木材使用的管理规则.结构物所用法国软木和硬木树种的目测分类.第1部分:大块木材

Regulations governing the use of timber in structure - Visual classification for the use of french softwood and hardwood species in structures - Part 1: massive wood

DB13/T 1712-2013 脲醛树脂浸渍改性木材

Modified wood impregnated with urea-formaldehyde resin