B94 渔业机械与设备 标准查询与下载

SC/T 6006.3-2001 渔业码头用皮带输送机.改向滚筒基本参数、尺寸与技术要求

Band conveyers used in fishery docks.Essential parameters,dimensions and technical requirements of tail pulley

SC/T 6006.2-2001 渔业码头用皮带输送机.传动滚筒基本参数、尺寸与技术要求

Band conveyers used in fishery docks.Essential parameters,dimensions and technical requirements fo drive pulley

SC/T 6001.2-2001 渔业机械基本术语.养殖机械

Fundamental terms of fishery machinery.Aquacultural machinery

SC/T 6007-2001 理鱼用带式输送机型式、基本参数与技术要求

Model, fundamental parameters and technical requirements of band conveyer for fish sorting

SC/T 6010-2001 叶轮增氧机技术条件

Specification for impeller aerator

SC/T 6006.7-2001 渔业码头用皮带输送机.辅助装置锥形托辊基本参数、尺寸与技术要求

Auxiliaries of band conveyers used in fishery docks.Essential parameters,dimensions and technical requirements of cone idler

SC/T 6006.8-2001 渔业码头用皮带输送机.辅助装置连接板基本参数、尺寸

Auxiliaries of band conveyers used in fishery docks.Essential parameters,dimensions of connecting plate

SC/T 6014-2001 立式泥浆泵

Vertical mud pump

SC/T 6006.1-2001 渔业码头用皮带输送机.型式、基本参数与技术要求

Band conveyer used in fishery docks.Models,essential parameters and technical requirements

SC/T 6001.1-2001 渔业机械基本术语.捕捞机械

Fundamental terms of fishery machinery.Fishing machinery

UL 1018-2001 电气养鱼设备

1.1 These requirements cover commercial and household electric equipment for use on or in aquariums in indoor locations at 300 volts or less, in accordance with the National Electrical Code, NFPA 70, such as heaters, pumps, filters, aerators, reflectors, hoods, electrically wired stands, and similar equipment. 1.2 These requirements do not cover: a) Illuminators or stands not specifically intended for use with aquariums or b) Aquarium tanks except when part of the tank acts as enclosure or water barrier for fittings, such as, but not limited to, filter, heating, or UV units that are integrated into the base or wall of the aquarium tank. Revised 1.2 effective January 31, 2010 1.3 Deleted April 29, 2003 1.4 Aquarium equipment involving tungsten-halogen or high intensity discharge lamps shall comply with the additional applicable requirements specified in the Standard for Portable Electric Luminaires, UL 153. Added 1.4 effective January 31, 2010

Electric Aquarium Equipment

SC/T 9010-2000 渔港总体设计规范

Master design code of fishery port

SC/T 8112-2000 玻璃钢渔船建造检验要求

本标准规定了以玻璃纤维增强材料和不饱和聚酷树脂为主要构造材料，以手糊成型玻璃钢渔船的材料检验、模具检验、船体建造检验、船体密性试验、实船完工检验等检验要求。 本标准适用于船长12～30m 的具有连续甲板结构的玻璃钢渔船的建造及验收。

Test requirements of FRP fishing vessel

SC/T 8058-2000 机动渔船灯桅

Lamp mast of fisheries motor vessel

SC/T 8062-2000 玻璃钢渔船总纵弯曲试验方法

本标准规定了玻璃纤维增强塑料(FRP)渔船在额定载荷下的总纵弯曲性能的测量方法。 本标准适用于FRP渔船总纵弯曲应力和挠度的测定及建造验收。

Test method for overall longitudinal bending of glass fiber reinforced plastics fishing vessel

SC/T 8070-2000 渔船燃油电加热装置安装技术要求

本标准规定了渔船燃油电加热装置的一般规定，电加热器及控制装置和安装技术要求。 本标准适用于渔业船舶采用燃油电加热时燃油加热装置(以下简称本装置)的选用和安装。

Installation technical standard for fisheries vessel fuel oil heater device

SC/T 8115-2000 渔船气胎离合器

本标准规定了渔船气胎离合器的产品规格、技术要求、静态试验及甜试装置、运行试验、检查规则、产品供应范围和产品的标志、包装、运翰及贮存。 本标准适用于渔船气胎离合器的设计、制造、试验与验收。

Fishing vessel pneumatic clutch

SC/T 8116-2000 渔船气胎离合器修理技术要求

本标准规定了渔船气胎离合器的修理及安装技术要求。 本标准适用于渔船CQL系列气胎离合器的修理、测试。

Technical requirements for repairing of fishing vessel pneumatic clutch

SC 8118-2000 海洋渔船稳定性报告书

本标准规定了海洋渔船稳性计算方法及稗性报告书的编制要求。 本标准适用于海洋捕捞渔船的设计和报检，其他海洋渔业船舶亦可参照执行。

Stability report of seagoing fishing vessel

SC/T 8053-2000 海洋渔船系泊、航行及捕捞试验通则

本标准规定了渔船系泊、航行和捕捞试验的基本方法和要求。 本标准适用于新建造的船长为24～90m的柴油机动力海洋捕捞作业渔船的常规项目的试验。其他渔业船舶可参照执行。

general provisions for programming mooring,sea trials and fishing of sea going fishing vessel