B96 木材采运机械与设备 标准查询与下载
共找到 203 条与 木材采运机械与设备 相关的标准，共 14 页
This document specifies the methodology for determining the kickback potential of gasoline-powered and electric-powered (including battery powered) chain-saws, complete with guide bar and saw-chain. This document has been demonstrated to be an accurate method of measurement for evaluating computed kickback angles and energy associated with chain-saw kickback for electric-powered chain- saws (including battery powered) and gasoline-powered chain-saws with engine capacity up to 80 cm3. It is not intended to evaluate chain-saws with an engine capacity of above 80 cm3. Furthermore, because of physical size limitations of the kickback machine, it is not intended for testing of units with guide bar cutting length in excess of 63 cm. Modifications to the methodology for determining the kickback potential introduced in this edition are aimed to have a better reproducibility of the results; test results obtained according to the previous methodology still maintain their validity.
Forestry machinery - Portable chain-saws - Kickback test
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2018-07-01
- 实施
本标准规定了当使用导板和锯链时对锯链润滑油的润滑能力分类的测试方法。 本标准设计了一个在锯切过程中可复制再现的锯链和导板的应力条件。试验演示了润滑油减少各摩擦部件之间磨损的能力。 本标准使油锯生产企业能够在使用说明书中给出推荐的锯链润滑油的规格型号。 试验装置是以瑞典试验委员会(SMP)的设计为基础研制的，试验程序也考虑到了德国林业技术委员会(KWF)有关可生物降解的锯链润滑油的长期实践经验。
Forestry machinery.Portable chain-saws.Test method for evaluating saw chain oil lubricity
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2017-06-05
- 实施
- 2017-09-01
Forestry machinery portable chainsaw saw chain lubricant performance evaluation test method
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2017-06-05
- 实施
- 2017-09-01
This Technical Specification specifies a method for determining the leaching of active ingredients or other compounds from treated wood by a semi-field method for use class 3 (outdoor above ground). The preservative treated wood can be tested with or without subsequently surface coating or other water-repellent treatment. The method is applicable to the testing of commercial or experimental preservatives or paint systems applied to timber by methods appropriate to commercial practice.
Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground). Semi-field method
- ICS
- 13.020.30;71.100.50
- CCS
- B96
- 发布
- 2016-11
- 实施
本标准规定了林业机械便携式油锯用机油泵(以下简称“机油泵”)的术语、定义、型号编制方法、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于安装在便携式油锯(包括以汽油机为动力的高枝锯，以下简称“油锯”)上自动润滑锯链和导板的机油泵。
Forestry machinery.Portable chain-saw.Oil pumps
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2016-07-27
- 实施
- 2016-12-01
本标准规定了林业机械电动鼓式枝丫切碎机（以下简称切碎机）的术语、定义、型号编制、系列型谱、基本参数、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准仅适用于以电动机为动力的刀辊直径不小于500 mm的鼓式枝丫切碎机。
Forestry machinery.Electric branch chippers with drum
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2016-07-27
- 实施
- 2016-12-01
本标准规定了测定带有导板和锯链的便携式油锯（以下简称油锯）反弹角的方法。 本标准已被证明是一种用于评估发动机排量不超过80 cm的油锯发生反弹时计算反弹角和反弹能量的精确测量方法。本标准不适用于评估发动机排量超过80 cm的油锯。此外，因受反弹机结构尺寸限制，要求测试油锯的导板有效锯切长度不超过63 cm。
Forestry machinery.Portable chain-saws.Kickback test
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2016-07-27
- 实施
- 2016-12-01
本标准规定了锯链的术语、定义、型号、规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于油锯及手持式电链锯的锯链。
Forestry machinery.Chain saw.Saw chains
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2016-07-27
- 实施
- 2016-12-01
本标准规定了导板的术语、定义、型号编制方法、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于油锯及手持式电链锯的导板。
Forestry machinery.Chain saw.Guide bars
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2016-07-27
- 实施
- 2016-12-01
Machinery for forestry - Forwarders - Terms, definitions and commercial specifications
- ICS
- 01.040.65;65.060.80
- CCS
- B96
- 发布
- 2016-03
- 实施
This International Standard specifies methods for measuring the braking time and release force of manually operated chain brakes on portable hand-held chain-saws.
Portable chain-saws - Chain brake performance
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2015-08
- 实施
本标准规定了自行式林业机械和按作业要求装配成林业机械的安全要求。本标准包括林业机械在正常使用或误用时,生产厂家可合理预见的一般的严重危害、危险情况和事件,如ISO 6814中规定的伐木机、归堆机、打枝机、集运机、木材装载机、集材机、联合作业机、联合伐木机和粉碎抛撒机,以及上述机型组合在一起的多功能联合作业机。本标准不涉及针对个别机器的危害,如有关具体附件的危害。因此,单独使用本标准不能足以覆盖本标准涵盖的大多数机器的所有严重危害。本标准不涉及与导板上端锯链断损及甩射、货物起卸、遥控操作、工作灯需求以及道路安全相关的危害。本标准不涉及振动测量试验装置以及工作周期,也不涉及噪声测量的检验方法。本标准不适用于专业维修人员维护和修理机器的相关危害。本标准的附录A给出了严重危害一览表。本标准不适用于该标准实施以前生产的机器。
Machinery for forestry.General safety requirements
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2014-08-21
- 实施
- 2014-12-01
Forestry machinery - Portable chain-saw front hand-guard - Dimensions and clearances
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2012-09
- 实施
This Japanese Industrial Standard specifies the rotary saws of bush cutters (hereafter referred to as “cutting saws”) used for the work of cutting down trees of small diameters or weeds mainly in agriculture and forestry with the exception of cutting saws for special use such as those for rush grass.
Bush cutter saws
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2012-07-20
- 实施
Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for forest service
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for tree service
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2011-12-08
- 实施
This part of ISO 11681 gives safety requirements and measures for their verification for the design and construction of portable, combustion-engine, hand-held chain-saws, intended to be used for forest work by only one operator, by persons with the right hand on the rear handle and left hand on the front handle having read and understood the safety requirements provided in the instruction handbook and using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This part of ISO 11681 deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE See Annex A for a list of significant hazards. This part of ISO 11681 is applicable to chain-saws manufactured after its date of publication.
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2011-12-01
- 实施
Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 2: Machines having a rotating platform with a cab and boom on the platform
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2011-12
- 实施
Machinery for forestry. Saw chain shot guarding systems. Test method and performance criteria
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2011-07-31
- 实施
- 2011-07-31
