C72 生产环境安全卫生设施 标准查询与下载

DL/T 669-1999 室外高温作业分级

Classified standard of working in the outdoor hot environment

BS ISO 11041:1997 颗粒砷、砷化合物和三氧化砷蒸气的测定.采用氢化物生成法和原子吸收光谱测定法

Gives a method by hydrid generation for the atomic absorption spectrometric determination of the mass concentration of particulate arsenic, arsenic compounds and arsenic trioxide vapour in workplace air. Applicable to the determination of mass concentrations of approximately 100 ng to 125 g of arsenic per sample. Not suitable for the determination of arsenic in the form of metal arsenides.

Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry

DD ENV 1631-1996 净化间技术.净化间和空气净化设备的设计、制造和操作

Cleanroom technology. Design, construction and operation of cleanrooms and clean air devices

ISO 11041:1996 车间空气 砷、砷化合物悬浮粒子和三氧化二砷蒸气的测定 氢化法和原子吸收光谱法

Gives a method by hydrid generation for the atomic absorption spectrometric determination of the mass concentration of particulate arsenic, arsenic compounds and arsenic trioxide vapour in workplace air. Applicable to the determination of mass concentrations of approximately 100 ng to 125 g of arsenic per sample. Not suitable for the determination of arsenic in the form of metal arsenides.

Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry

ISO 11174:1996 车间空气和镉化合物悬浮粒子的测定 燃烧和电热原子吸收光谱法

Specifies methods for the determination of the mass concentration of particulate cadmium and cadmium compounds in workplace air by electrothermal atomic absorption spectrometric method (ETAAS) applicable to the determination of mass concentrations of 10 ng to 600 ng Cadmium per sample or flame atomic absorption spectrometric method (FAAS), applicable to the determination of mass concentrations of 0,15 g to 96 g Cadmium per sample.

Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method

DIN EN 689:1995 工作环境.用极限值和测量策略作对比通过吸入法对化学试剂辐照的评估指南; 德文版本 EN 689:1995

Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy; German version EN 689:1995

ASTM E1718-95(2004) 碳化硅金属须工作区域的管理与技术控制标准规范

1.1 This guide applies to workplaces where unbound silicon carbide whiskers are manufactured, processed into products, or otherwise used.1.2 This guide offers guidance for controlling workplace exposures to airborne silicon carbide whiskers.1.3 All applicable federal, state, county, and local regulations must be complied with when this guide is used.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas

ASTM E1718-95 碳化硅金属须工作区域的管理与技术控制标准规范

1.1 This guide applies to workplaces where unbound silicon carbide whiskers are manufactured, processed into products, or otherwise used. 1.2 This guide offers guidance for controlling workplace exposures to airborne silicon carbide whiskers. 1.3 All applicable federal, state, county, and local regulations must be complied with when this guide is used. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas

AS 1319:1994 职业环境的安全标志

Specifies requirements for the design and use of safety signs intended for use in the occupational environment to regulate and control safety related behaviour, to warn of hazards and to provide emergency information including fire protection information

Safety signs for the occupational environment

NBN-EN 60969-1993 通用照明设备性能要求的自镇流灯具规范

Self-ballasted lamps for general lighting. Performance requirements

NBN-EN 60662-1993 高压钠蒸汽灯

High pressure sodium vapour lamps

NBN-HD 494 S3-1993 用在道路运输工具上的照明灯．量纲指示，用电指示，照明指示

Lamps for road vehicles Dimentional, electrical and luminous requirements

prEN 689-1992 工作场所的气氛.为与极限值比较和测量对策用评定化学试剂影响的导则

Workplace atmospheres; guidance for the assessment of exposure to chemical agents for comparison with limit values and measurement strategy

ASTM E1429-91(2004) 洒药机及类似设施喷洒农药时对人体暴露部分健康的潜在危害评定的标准指南

Concern over the toxic effects observed in tests on animals has demonstrated the need to assess hazards of many new, and some presently used, materials. The process described herein will help producers, regulatory agencies, and others to compare alternative materials efficiently and adequately, completely assess a final candidate material, or reassess the health hazard of a material already in use. The process is not intended for pesticide registration; this guide provides techniques for health hazard assessment. Sequential assessment and feedback allow appropriate judgments concerning the efficient use of resources, thereby minimizing unnecessary testing and focusing effort on the information most pertinent to each material. For different materials and situations, hazard assessment will appropriately be based on substantially different amounts and kinds of biological, chemical, physical, and toxicological data. Assessment of the health hazard of a material should never be considered complete for all time. Reassessment should be considered if new uses are discovered, the nature of the exposure changes, or new information on biological, chemical, physical, or toxicological properties becomes available. Periodic review will help ensure that new information receives prompt and appropriate attention. If a pesticide is transformed substantially into another chemical entity in the environment, the hazard of the transformed material(s) may need to be assessed.1.1 This guide covers a stepwise process for using information concerning biological, chemical, physical, and toxicological properties of a pesticide or other chemical(s), or of a formulation to identify adverse effects that may occur to pesticide applicators or others with potential exposure. 1.2 The health hazard assessment process is complex and requires decisions at a number of points; thus, the validity of the assessment depends on the soundness of those decisions, as well as the soundness of the information used. All decisions should be based on carefully documented analyses so that an appropriate assessment can be completed, at the least cost, which is consistent with scientific validity.1.3 This guide assumes that the reader is knowledgeable in animal toxicology and related pertinent areas, and relies heavily on the judgment of the evaluator, particularly in the area of chronic hazards.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure

BS 5295-0:1989 封闭空间环境清洁度.第0部分:净室和净化空气装置总则、术语和定义

This part of BS 5295 gives a general introduction to BS 5295 and BS EN ISO 14644 defines terms used in the design, construction, installation, testing, use and monitoring of controlled environment clean rooms and clean air devices. NOTE The title of the publication referred to in this standard is given on Inside back cover.

Environmental cleanliness in enclosed spaces - General introduction, terms and definitions for clean rooms and clean air devices

DB32/T 4443-2023 罐区内在役危险化学品（常低压）储罐管理规范

Regulations for the management of storage tanks for hazardous chemicals (atmospheric and low pressure) in service in tank farms