D91 建井设备 标准查询与下载

MT/T 974-2006 煤矿用单体液压锚杆钻机

本标准规定了煤矿用单体液压锚杆钻机（以下简称钻机）的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于煤矿用单体液压锚杆钻机。

Single hydraulic bolting machine in coal mine

MT/T 547-2006 转子式混凝土喷射机

本标准规定了转子式混凝土喷射机（以下简称“喷射机”）的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于转子式混凝土喷射机。

Rotor concrete spraying machine

MT 159-2005 矿用除尘器通用技术条件

本标准规定了矿用除尘器的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于矿用除尘器。

Universal technical specification for dust collection enginery for mine

DIN EN 14591-1:2004 地下矿的爆炸防护和保护.保护系统.第1部分:抗2巴爆炸通风结构

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure; German version EN 14591-1:2004

DIN 21164:2003 打竖井.提升吊桶导向架.安全性要求和试验

The riders for winding kibbles are chiefly used for shaft sinking; they serve for the guiding of shaft conveyances and other loads during shaft hoisting.

Shaft sinking - Riders for winding kibbles - Safety requirements and testing

DIN 21530-5:2003 矿井支护.第5部分:矿井支护零部件标记

Mine support - Part 5: Marking of parts of mine support

DIN 21530-3:2003 矿井支护.第3部分:要求

The document specifies the requirements of the tolerance and the material of high quality for systems of mine supports and sections of mine supports.

Mine support - Part 3: Requirements

DIN 21530-1:2003 矿井支护.第1部分:总则

Mine support - Part 1: General

DIN 21530-2:2003 矿井支护.第2部分:尺寸、名称与符号及静力值

Mine support - Part 2: Dimensions, designation and statical values

DIN 21530-4:2003 矿井支护.第4部分:试验

The document describes all testings, being required for proving the quality of systems of mine supports and sections of mine supports.#,,#

Mine support - Part 4: Testing

DIN 21636:2003 采矿空气调节系统.带式输送机气阀.尺寸、标识、要求和试验

This standard applies to air locks for conveyors in mine excavation. They regulate the air within the region of conveyors. They are part of the air locks and are assembled in the air lock frame.

Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing

MT/T 188.5-2000 煤矿用乳化液泵站

本标准规定了煤矿用乳化液泵站安全阀的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿用乳化液泵站(以下简称泵站)配套的安全阀(以下简称阀).煤矿井下以清水为工作介质的喷雾灭尘泵站的阀也可参照采用。

Coal mine emulsion pump station

NF E65-404:2000 立式岩心钻机.安全性

Core drilling machines on stand - Safety.

DIN 21194:1999 打竖井.导向钢丝绳用支座.安全要求和试验

The document defines abutments for guide ropes capable of accepting tensioning forces up to 125 kN. Abutments are used in shaft-sinking for the attachment of guide ropes and are essentially comprised of attaching devices for rope ends, transverse/longitudinal beams and interlocking devices.#,,#

Shaft sinking - Abutment for guide ropes - Safety requirements and testing

JB/T 3153-1999 HZ-4、HZ-6抓岩机

　　本标准规定了HZ-4和HZ-6抓岩机产品的型式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 　　本标准适用于HZ-4和HZ-6抓岩机。

HZ-4、HZ-6 Grab loader

JB/T 3903-1999 TQ-16×16天井爬罐

　　本标准规定了TQ-16×16天井爬罐的型式、基本参数、技术要求、试验方法、检验规则，标志、包装、运输和贮存。 本标准适用于TQ-16×16天井爬罐。该产品主要用于地下矿山和地下水电工程掘进垂直、急倾斜、弯曲的高天井和盲井，也可用于建筑部门提运物料。

TQ-16×16 Raise climber

JB/T 53530-1999 ST/SD系列梭式矿车 产品质量分等

ST/SD series shuttle mine car product quality classification

JB/T 53517-1999 TQ-16×16天井爬罐 产品质量分等

TQ-16×16 patio climbing tank product quality grading

JB/T 53528-1999 JZA-5/1000安全梯凿井绞车 产品质量分等

Product quality classification of JZA-5/1000 safety ladder sinking winch

JB/T 53529-1999 JZ型凿井绞车 产品质量分等

Product quality classification of JZ type drilling winch