D93 提升、贮运设备 标准查询与下载
共找到 469 条与 提升、贮运设备 相关的标准，共 32 页
Specifications for safety inspection and inspection of main ventilator system in use in metal and nonmetal underground mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-11-16
- 实施
- 2011-01-01
Specifications for safety inspection and inspection of in-service air compressors in metal and nonmetal underground mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-11-16
- 实施
- 2011-01-01
Specifications for safety inspection and inspection of winch hoisting system in construction of hydropower and water conservancy projects
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-11-16
- 实施
- 2011-01-01
Specification for safety inspection and inspection of main drainage system in use in metal and nonmetal underground mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-11-16
- 实施
- 2011-01-01
本规范规定了金属非金属地下矿山在用排水泵及主排水系统安全性能检验的项目、技术要求、检验方法、判断规则和检验周期。 本规范适用于金属非金属地下矿山在用排水泵和主排水系统的现场安全检验,也可作为安全生产监管部门安全监督管理的依据。
Safety testing specification of in-service main dewatering system for metal and nonmetal underground mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-09-06
- 实施
- 2011-05-01
本标准规定了金属非金属露天矿山在用矿用自卸汽车安全检验的项目、技术要求、检验方法、判定规则和检验周期。 本标准适用于金属非金属露天矿山在用矿用自卸汽车现场检验。
Safety testing specification of in-service mining dump trucks for metal and nonmetal opencast mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-09-06
- 实施
- 2011-05-01
本规范规定了矿山在用斜井人车安全性能检验的项目、技术要求、检验方法、判定规则和检验周期。 本规范适用于矿山在用抱轨式和插爪式斜井人车现场安全性能检验、安全生产监督管理部门的监督管理和企业对斜井人车维护、保养后的检验。
Safety testing specification of in-service slope manriding car for mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-09-06
- 实施
- 2011-05-01
Pulley for clothes hoists in pithead baths
- ICS
- 21.220.30
- CCS
- D93
- 发布
- 2010-06
- 实施
Double loop chain for hoisting clothes in pithead baths - Not tested, non-calibrated
- ICS
- 21.220.30
- CCS
- D93
- 发布
- 2010-06
- 实施
Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining; German version EN 14658:2005+A1:2010
- ICS
- 53.040.10
- CCS
- D93
- 发布
- 2010-06
- 实施
- 2010-06-01
本标准规定了启闭风门绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿或其它矿山通风机风流换向时启闭风门和闸门的绞车。
Changing ventilation winch
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了缠绕式矿井提升设备用塑料衬板的型号和规格、技术要求、实验方法、检验规则、出厂附带文件。 本标准适用于缠绕式矿井提升设备用塑料衬板，塑料衬板主要应用于煤炭、冶金等矿山用单绳缠绕式矿井提升机主轴装置卷筒，提升绞车主轴装置卷筒，以及类似的、利用卷筒装置缠绕钢丝绳的机械上。
Lining for entwine hoist
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了矿井提升机天轮和导向轮用衬块的型号、规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于矿井提升机天轮和导向轮用衬块。天轮、导向轮衬垫主要应用于煤炭、冶金等矿山用单绳绕式提升机天轮、多绳磨擦式提升机导向轮，及类似的、利用天轮、导向轮改变钢丝绳方向的提升设备上。
Lining block for sheave wheel of mine hoist
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了JTK型矿用提升绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于JTK型矿用提升绞车,主要用于煤矿、金属矿、非金属矿的倾斜巷道和小型竖井来升降物料等。
JTK Type mine winder
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了JTP型矿用提升绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿、金属矿、非金属矿的倾斜巷道和小型竖井来升降物料和人员的绞车。
JTP Type mine winder
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2010-02-11
- 实施
- 2010-07-01
Covers the track systems currently in general use underground in mines and specifies the requirements for the maintenance and safe use of underground and associated shaft head track systems.
Underground rail trackwork in mines
- ICS
- 93.100
- CCS
- D93
- 发布
- 2009-10-23
- 实施
Articles and materials from synthetics for use in underground mines - Part 1: Conveyor belts - Hygienic requirements, testing, marking
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2009-07
- 实施
- 2009-07-01
This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains. This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls, to compressed air powered machines, or to the interfaces between the elements of the conveyor and other machine installations. Armoured face conveyors are designed for the transport of minerals and rock only. NOTE Armoured face conveyors can be used as a base for guiding the extraction machine and as a link between the face roof support and the extraction machine if required. This European Standard deals with all hazards, hazardous situations and events for the use in mines, when they are used as intended and for the conditions foreseen by the manufacturer. See clause 4 for the hazards dealt with. This European Standard does not cover any hazards resulting from the electrical equipment associated with the machine. It does not contain any requirements relating to dust suppression or firedamp hazards. Hazards due to noise are also excluded from this European Standard, but a separate European Standard is in preparation where hazards due to noise will be addressed. It is intended for manufacturers producing and marketing complete machines, and for manufacturers assembling new parts from different origins or assembling new machines even for their own use. These are called "manufacturers" in this European Standard. This European Standard applies to armoured face conveyors which are manufactured after the date of issue of this European Standard.
Underground mining machinery - Specification for the safety requirements of armoured face conveyors
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2009-04
- 实施
本标准规定了金属非金属矿山在用摩擦式提升机安全检测检验的项目、技术要求、判定规则和检验周期。 本标准适用于金属非金属矿山在用摩擦式提升机安全检测检验。
Safety inspecting-testing specification of in-service friction mine hoist for metal and nonmetal mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2008-11-19
- 实施
- 2009-01-01
本规范规定了金属非金属矿山在用缠绕式提升机安全检测检验的项目、技术要求、判定规则和检验周期。 本规范适用于金属非金属矿山卷筒直径≥2.0m的在用缠绕式提升机现场检测检验。
Safety inspecting-testing specification of in-service mine drum hoist for metal and nonmetal mines
- ICS
- 73.100.40
- CCS
- D93
- 发布
- 2008-11-19
- 实施
- 2009-01-01
