D97 矿山支护设备 标准查询与下载

MT/T 188.1-2006 煤矿用乳化液泵站.第1部分:泵站

MT/T 188的本部分规定了煤矿用乳化液泵站（以下简称泵站）的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装和贮存。 本部分适用于煤矿井下以高含水液压液（含乳化液）为工作介质的乳化液泵站，也适用于煤矿井下以清水为工作介质的喷雾灭尘泵站和注水泵站。

Emulsion pump station for coal mine.Part 1:Pump station

MT/T 98-2006 液压支架用软管及软管总成检验规范

本标准规定了液压支架用软管及软管总成的术语和定义、试验系统要求、试验方法、检验规则。 本标准适用于液压支架用软管及软管总成的检验，也适用于煤矿中输送石油基、水基流体的软管及软管总成的检验。 本标准不适用于蓖麻油基和酯基液体的软管及软管总成的检验。

Inspection specifications of hose and hose kit for powered support

MT/T 112.1-2006 矿用单体液压支柱 第1部分 通用要求

Single hydraulic prop for mining - Part 1 General requirements

MT/T 986-2006 矿用U形销式快速接头及附件

本标准规定了矿用U形销式快速接头（以下简称接头）及附件的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 　　本标准适用于以普通矿物油及高含水液压液为工作液的管路系统中接头及附件。

Quick adapter with U pin and accessories for mine

MT 112.1-2006 矿用单体液压支柱.第1部分.通用要求

MT 112的本部分规定了矿用单体液压支柱（含注液枪）的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于矿用单体液压支柱（以下简称支柱）的制造、检验和评定。

Hydraulic signle prop for coal mine.Part 1:General requirements

MT/T 972-2006 矿用锚索张拉机具

本标准规定了矿用锚索张拉机具（以下简称为机具）的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于煤矿用锚索张拉机具，也适用于非煤矿用锚索张拉机具。

Pulling device for prestressing anchorage in coal mine

MT/T 979-2006 煤矿用锚杆拉力计

本标准规定了煤矿用锚杆拉力计（以下简称拉力计）的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿用锚杆拉力计，也适用于非煤矿用锚杆拉力计。

Anchor shank tension apparatus in coal mine

MT/T 942-2005 矿用锚索

本标准规定了矿用锚索的分类与型号、技术要求、试验方法、检验规则以及标志、包装、运输与贮存。 本标准适用于煤矿井巷工程支护用预应力锚索。

Prestressed anchorage in coal mine

BS EN 1804-2:2001+A1:2010 地下采矿机械.液压矿顶支撑物的安全要求.动力装置支脚和柱塞

This standard specifies the safety requirements for legs and rams when used as specified by the manufacturer or his authorised representative. Examples covered by the standard include legs, support rams and rams with their mechanical extensions, internal valves and safety devices, seals, hydraulic connections (up to the first hose or Type B valve, see Part 3) and their lifting points but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control systems. This standard applies to legs, support rams and rams used at ambient temperatures from –10 °C to 60 °C. This standard identifies and takes account of: ? Possible hazards which may be caused by the operation of legs, support rams and rams; ? Areas and operating conditions which may create such hazards; ? Hazardous situations which may cause injury or may be damaging to health. This standard describes methods for the reduction of these hazards. A list of hazards covered appears in clause 4. This standard is applicable to all legs, support rams and rams placed on the market for the first time and which are manufactured after the date on which this standard was published. This European standard does not establish the additional requirements for: ? Specially corrosive environments; ? Hazards occurring during construction, transportation, decommissioning; ? Earthquake.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams

MT 219-2002 水泥锚杆 卷式锚固剂

本标准规定了水泥锚杆用卷式锚固剂(简称锚固卷)的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于矿山及其他工程用水泥锚杆卷式锚固剂。

Cement anchor bolts-Cementitious anchoring capsule

MT 146.2-2002 树脂锚杆 金属杆体及其附件

本标准规定了树脂锚杆金属杆体及其附件的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿及其他工程支护用的树脂锚杆金属杆体及其附件。

Resin anchor bolts - Steel bars and accessories

MT/T 904-2002 焊接结构软岩钻杆与钻头

本标准规定了焊接结构软岩钻杆与钻头的产品分类、技术要求、试验方法、检验规则及标志、标签、包装。 本标准适用于焊接结构软岩钻杆与钻头(以下简称产品)。

Welded drill rod and bit for low-compressive strength rock

MT/T 905-2002 煤矿锚杆钻机用回转钻杆

本标准规定了煤矿锚杆钻机用回转钻杆(以下简称钻杆)的技术要求、试验方法、检验规则及标志、标签、包装。 本标准适用于煤矿锚杆钻机配套使用的六方或圆形回转钻杆。

Rotary drill rod used for coal mining roofbolter

MT 146.1-2002 树脂锚杆 锚固剂

本标准规定了树脂锚杆锚固剂的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿及其他工程支护用的树脂锚杆锚固剂，有关井筒装备的安装、基础锚固等工程所需的树脂锚固剂也可参照执行。

Resin anchor bolts - Capsules

MT 218-2002 水泥锚杆 杆体

本标准规定了水泥锚杆用杆体的产品分类、技术要求、试验方法、检验规则和产品标志、包装、运输、贮存。 本标准适用于矿山及其他工程用水泥锚杆杆体。

Cement anchor bolts-Bars

MT 76-2002 液压支架（柱）用乳化油、浓缩物及其高含水液压液

本标准规定了乳化型(HFAE)和溶液型(HFAS)高含水液压液及配制该液压液的乳化油和浓缩物的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于液压支架与外注式单体液压支柱用高含水液压液及配制这些液压液的乳化油和浓缩物，浓缩物包括液态浓缩物和固态粉剂浓缩物。

Emulsifying oil,concentrate and high-water content hydraulic fluid used for powered support and prop

BS EN 1804-1:2001+A1:2010 地下采矿机械.液压矿顶支撑物的安全性要求.支撑装置及一般要求

This standard specifies the safety requirements for support units when used as specified by the manufacturer or his authorised representative. Examples of support units are frame supports, chock supports, shield supports, paired frames and push-pull support systems including the components of advancing and anchoring devices which provide support functions. This part of the standard excludes fixing elements on the conveyor, coal-winning equipment, power set legs and rams, valves, hydraulic and electro-hydraulic control units, lighting and signalling facilities and other ancillary equipment. This standard applies to support units used at temperatures from -10° C to 60° C. This standard also applies to support components and support accessories which are provided if the support unit is fitted with stowing equipment. This standard identifies and takes account of: ? Possible hazards which may be caused by the operation of support units; ? Areas and operating conditions which may create such hazards; ? Hazardous situations which may cause injury or may be damaging to health; This standard describes methods for the reduction of these hazards. A list of hazards covered appears in clause 4. This European standard does not establish the additional requirements for: ? Specially corrosive environments; ? Hazards occurring during construction, transportation, decommissioning; ? Earthquake. This standard is applicable to all support units placed on the market for the first time, which are manufactured after the date on which this standard was published.

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements

MT 312-2000 液压支架通用技术条件

本标准规定了矿用液压支架（以下简称支架）的通用技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿综采工作面用液压支架。

General specification for powered support

MT/T 882-2000 U型钢拱形可缩性支架技术条件和试验方法

本标准规定了U 型钢拱形可缩性支架的技术要求、试验方法和检验规则。 本标准适用于U 型钢拱形可缩性支架(以下简称U型钥支架)。

Specification and experimental method for yielding U.section steel support in arch-shaped

MT/T 879-2000 煤矿预应力锚固施工技术规范

本标准规定了煤矿预应力锚固施工的有关定义、锚索材料、设计和施工的技术要求以及试验监测、工程验收等基本要求。 本标准适用于煤矿巷道、硐室、井筒的预应力锚固施工。

Technical specification of coal prestressed anchoring construction