E11 石油地质勘探 标准查询与下载

SY/T 5912-2010 牙形石分析鉴定方法

本标准规定了牙形石（全称牙形类化石，又称牙形刺）分析鉴定的方法步骤及质量安全要求。 本标准适用于海相寒武纪至三叠纪地层中牙形石的取样、分析和鉴定等工作。

Analysis and authenticates method for conodonts

SY/T 5782-2010 岩性油(气)藏探明储量计算细则

本标准规定了岩性油（气）藏的石油天然气探明储量计算方法。 本标准适用于岩性油（气）藏（田）的石油、天然气的储量计算与评价。

Instructions for estimation of proved reserves for lithologic oil and gas reservoir

SY/T 5518-2010 石油天然气井位测量规范

本标准规定了石油天然气井位测量的工作内容和要求。 本标准适用于石油天然气井位的测量作业。

Survey specification for oil and gas wells location

SY/T 5486-2010 非常规地层测试技术规程

本标准规定了非常规地层测试的施工准备及技术要求。 本标准适用于压控式地层测试、膨胀式封隔器测试施工作业。

Technical regulation for non-conventional drill stem testing

SY/T 5454-2010 垂直地震剖面法勘探技术规程

本标准规定了垂直地震剖面法勘探数据采集、资料处理、综合解释和资源归档的主要作业内容及技术要求。 本标准适用于陆地和海上VSP的项目设计、数据采集、资料处理、综合解释和资料归档等勘探过程；Walkaround-VSP、逆VSP、随钻VSP和4D-VSP也可参考使用。

Technical specification of vertical seismic profiling

SY/T 5251-2010 油气井录井项目内容及质量基本要求

本标准规定了油气井录井项目的内容及质量基本要求。 本标准适用于油气井的录井资料采集及施工质量控制。

Contents and basic quality requirements of mud logging items of oil & gas wells

SY/T 5386-2010 裂缝性油(气)藏探明储量计算细则

本标准规定了裂缝性油(气)藏探明储量计算的工作要求和方法。 本标准适用于裂缝性油(气)藏探明储量计算与评价。

The regulations of proved reserves estimation for fractured oil and gas reservoir

SY/T 6156-2010 气枪震源使用技术规范

本标准规定了气枪震源系统的选配、检测项目及技术指标和要求、试验工作、气枪震源激发对测量定位系统的要求、质量控制要求、气枪震源系统操作要求和提交验收的资料等内容。 本标准适用于水域地区进行石油地震勘探所使用的气枪震源系统。

Technical specification of airgun source

SY/T 5965-2010 油气探井地质设计规范

本标准规定了油气探井地质设计的编写原则、格式、内容及要求。 本标准适用于区域探井、预探井、评价井地质设计的编制，其他各类井可参照执行。

Geological proposal specification for oil & gas exploration wells

SY/T 5819-2010 陆上重力勘探技术规程

本标准规定了陆上重力勘探的技术设计、仪器准备、资料采集及验收、资料处理、资料解释以及报告编写的基本方法和技术要求，包括陆上的地面重力测量方法、借助高脚架的水上重力测量方法和水下重力测量方法。 本标准适用于陆上石油重力勘探工作。

Technical specification for land gravity survey

SY/T 6583-2010 石油天然气探明储量报告编制规范

本标准规定了石油、天然气探明储量报告编制内容与格式。 本标准适用于石油、天然气容积计算探明储量报告的编制。

Regulation for working out the report of proved petroleum reserves

SY/T 5930-2010 电法仪使用与维护

本标准规定了电法仪使用与维护的技术要求。 本标准适用于石油天然气地球物理勘探作业中V5系统、MT-1系统、V5-2000系统、MT-24系统、V8系统、AGE-xx1系统、USEM-24系统的使用与维护。

Operation and maintenance for electromagnetic instruments

SY/T 5163-2010 沉积岩中黏土矿物和常见非黏土矿物X射线衍射分析方法

本标准规定了应用X射线衍射（XRD）技术测定沉积岩中黏土矿物和常见非黏土矿物含量分析方法及对分析结果的质量要求。 本标准适用于沉积岩中黏土矿物及石英、方解石、白云石、铁白云石、菱铁矿、硬石膏、石膏、无水芒硝、重晶石、黄铁矿、石盐、斜长石、钾长石、钙芒硝、浊沸石、方沸石等常见非黏土矿物的定性与定量分析。

Analysis method for clay minerals and ordinary non-clay minerals in sedimentary rocks by the X-ray diffraction

ASTM D6274-10 地球物理γ记录传导钻孔标准指南

An appropriately developed, documented, and executed guide is essential for the proper collection and application of gamma logs. This guide is to be used in conjunction with Guide D5753. The benefits of its use include improving selection of gamma logging methods and equipment, gamma log quality and reliability, and usefulness of the gamma log data for subsequent display and interpretation. This guide applies to commonly used gamma logging methods for geotechnical applications. It is essential that personnel (see the Personnel section of Guide D5753) consult up-to-date textbooks and reports on the gamma technique, application, and interpretation methods.1.1 This guide covers the general procedures necessary to conduct gamma, natural gamma, total count gamma, or gamma ray (hereafter referred to as gamma) logging of boreholes, wells, access tubes, caissons, or shafts (hereafter referred to as boreholes) as commonly applied to geologic, engineering, ground-water, and environmental (hereafter referred to as geotechnical) investigations. Spectral gamma and logging where gamma measurements are made in conjunction with a nuclear source are excluded (for example, neutron activation and gamma-gamma density logs). Gamma logging for minerals or petroleum applications are excluded. 1.2 This guide defines a gamma log as a record of gamma activity of the formation adjacent to a borehole with depth (See Fig. 1). 1.2.1 Gamma logs are commonly used to delineate lithology, correlate measurements made on different logging runs, and define stratigraphic correlation between boreholes (See Fig. 2). 1.3 This guide is restricted to gamma logging with nuclear counters consisting of scintillation detectors (crystals coupled with photomultiplier tubes), which are the most common gamma measurement devices used in geotechnical applications. 1.4 This guide provides an overview of gamma logging including general procedures, specific documentation, calibration and standardization, and log quality and interpretation. 1.5 To obtain additional information on gamma logs, see Section 13. 1.6 This guide is to be used in conjunction with Guide D5753. 1.7 Gamma logs should be collected by an operator that is trained in geophysical logging procedures. Gamma logs should be interpreted by a professional experienced in log analysis. 1.8 The geotechnical industry uses English or SI units. The gamma log is typically recorded in units of counts per second (cps) or American Petroleum Institute (API) units. 1.9 This guide does not purport to address all of the safety and liability problems (for example, lost or lodged probes and equipment decontamination) associated with its use. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.11 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a g......

Standard Guide for Conducting Borehole Geophysical Logging - Gamma

SY/T 5980-2009 探井试油设计规范

本标准规定了探井试油(气)地质设计、工程设计、施工设计的基本内容及格式。 本标准适用于探井试油(气)地质设计、工程设计、施工设计的编制工作。 海上油田可参照执行本标准。

Specification for design of well test of exlporation well

SY/T 5434-2009 碎屑岩粒度分析方法

本标准规定了采用激光法、筛分法、光透法和图像法测定碎屑岩粒度的方法。 本标准适用于碎屑岩样品的粒度分析。

Analysis method for particle size of clastic rocks

SY/T 5481-2009 地震勘探资料解释技术规程

本标准规定了二维、三维地震勘探资料解释技术和质量要求。 本标准适用于二维、三维地震勘探资料解释。

Technical specification of seismic date interpretion

SY/T 5601-2009 天然气藏地质评价方法

本标准规定了天然气藏地质评价方法。 本标准适用于勘探阶段天然气藏的地质评价，未知区天然气藏形成的可能性及其规模大小的预测也可参考本标准执行。

Geological estimation method for natural gas reservoir

SY/T 5928-2009 石油地震勘探资料归档保管规范

本标准规定了石油地震勘探采集、处理和解释成果等各项原始资料的归档保管要求和方法。 本标准适用于石油地震勘探资料的归档和保管。

Specifications for seismic exploration data delivering filing and keeping

SY/T 5939-2009 重力仪使用与维护

本标准规定了重力仪使用与维护。 本标准适用于LCR-D型、LCR-G型、LCR-EG型、LCR-UGS型、LCR-S型和CG-3型、CG-5型重力仪器。

Operation and maintenance for gravimeter