E31 燃料油 标准查询与下载

BS EN 16761-1:2015 汽车燃料. 采用气相色谱法测定乙醇 (E85) 汽车燃料中的甲醇含量. 利用单柱技术的方法

Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography. Method using single column technique

DB14/T 615-2015 乘用车甲醇/汽油两用燃料装置装调技术要求

Technical requirements for installation and adjustment of methanol/gasoline dual-purpose fuel devices for passenger cars

EN 16761-1:2015 汽车燃料.通过气相色谱法测定汽车乙醇（E85）燃料中的甲醇.第1部分:采用单柱技术的方法

This European Standard specifies a method for the determination of methanol in automotive ethanol (E85) fuel (also designated as ethanol (E85) automotive fuel or shortly "E85") by capillary gas chromatography using flame ionization detection. Fuel quality specifications for this product exist, see Bibliography Entry. The measurement range for the methanol is from about 0,5 % (V/V) to about 1,5 % (V/V). Other methanol contents can also be determined, however no precision data for results outside the specified range is available. NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, ɸ. WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique

DIN EN ISO 20844:2015 石油及其相关产品.利用柴油喷射器嘴测定含聚合物油的剪切稳定性(ISO 20844-2015);德文版本EN ISO 20844-2015

Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015); German version EN ISO 20844:2015

EN 16761-2:2015 汽车燃料.通过气相色谱法测定汽车乙醇（E85）燃料中的甲醇.第2部分:用心脏切开术的方法

This European Standard specifies a determination method of methanol in automotive ethanol (E85) fuel (also designated as ethanol (E85) automotive fuel or shortly "E85") by capillary gas chromatography using heart cutting technique. Fuel quality specifications for this product exist, see Bibliography Entry. This standard is applicable to fuels having a methanol content from about 0,5 % (V/V) to about 1,5 % (V/V). Other methanol contents can also be determined, however no precision data for results outside the specified range is available. NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, ɸ. WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique

DIN 51623:2015 菜油兼容性内燃机的燃料.菜籽油的燃料.要求和试验方法

Fuels for vegetable oil compatible combustion engines - Fuel from vegetable oil - Requirements and test methods

NF M07-088:2015 液化石油产品.无铅汽油.气相色谱法(O-FID)测定有机氧含量和完全有机束缚氧含量

Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)

JIS K 2255:2015 石油产品.汽油.铅含量的测定

Petroleum products -- Gasoline -- Determination of lead content

BS EN 16709:2015 汽车燃料. 高FAME柴油燃料 (B20和B30). 要求和试验方法

Automotive fuels. High FAME diesel fuel (B20 and B30). Requirements and test methods

NB/SH/T 0902-2015 含沥青质重质燃料油正庚烷诱导相可分离性值的测定.光学扫描法

本标准规定了在现场或实验室使用光学扫描设备测量溶解在甲苯中的燃料油在加入正庚烷后相分离难易程度即可分离性值的定量测定方法。本标准适用于含沥青质的重质燃料油。

Standard test method for measuring n-heptane induced phase separation of asphaltene-containing heavy fuel oil as separability number by an optical scanning device

NB/SH/T 0903-2015 脂肪酸甲酯中甲醇含量的测定.气相色谱法

本标准规定了用作生物柴油和民用取暖油的脂肪酸甲酯中甲醇含量的测定方法。本标准适用于测定脂肪酸甲酯中质量分数为0.01%~0.5%的甲醇含量。本标准不适用于含有其他低沸点组分的脂肪酸甲酯混合物中甲醇含量的测定。

Standard test method for determination of methanol content in fatty acid methyl esters by gas chromatography

NB/SH/T 0892-2015 中间馏分燃料中痕量元素的测定电感耦合等离子体原子发射光谱法

本标准规定了采用电感耦合等离子体原子发射光谱法(ICP-AES)测定中间馏分燃料中的部分元素(如表1所示)的方法。本标准适用于测定元素含量范围约为质量分数0.1 mg/kg～2.0 mg/kg的试样。对于超出这个含量范围的试样虽然可以参照本标准的试验过程进行测定，但是精密度可能不适用。本标准所指的中间馏分燃料是沸点范围在150℃～ 390℃的所有馏分，该范围包括但并不限于柴油和喷气燃料。本标准并非用于不溶性颗粒物的分析；但是非常细小的颗粒物(小于1μm)会被带入到等离子体中，并被定量分析。如果试样中某待测元素以易挥发的形式存在时，则本标准测定的结果会比真实值偏高。例如，测定含有六甲基二硅氧烷试样时，硅的测定会产生偏差，使结果偏高。

Standard test method for determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry (ICP-AES)

NB/SH/T 0895-2015 中间馏分燃料和液体燃料过滤器阻塞倾向测定法

本标准规定了以采用不同过滤介质的三个方法步骤(A、B、C)测定燃料过滤器阻塞倾向(FBT)和过滤性能的方法。本标准适用于40 ℃运动黏度在1.3 mm/s～6.0 mm/s范围内的燃料，包括中间馏分燃料和液体燃料，如生物柴油、生物柴油调合燃料等。本标准不适用于测定含有游离水(不溶解的水)的燃料(见7.3)。

Determination of filter blocking tendency of middle distillate fuels and liquid fuels

NB/SH/T 0916-2015 柴油燃料中生物柴油(脂肪酸甲酯)含量的测定.红外光谱法

本标准规定了测定柴油燃料中生物柴油(脂肪酸甲酯(FAME))含量的方法。本标准适用于测定柴油燃料中体积分数为1%～ 20%的脂肪酸甲酯含量。本标准只适用于测定脂肪酸甲酯(FAME)含量，含有脂肪酸乙酯(FAEE)的生物柴油将会产生负偏差。

Standard test method for determination of biodiesel (fatty acid methyl esters) content in diesel fuel oil using mid infrared spectroscopy

NB/SH/T 0908-2015 重质燃料油和原油稳定性及相容性的测定.光学检测法

本标准规定了沥青质絮凝的滴定和光学检测自动方法，用于测定石油炼制的渣油物料、残渣燃料油和原油的稳定性和相容性参数。本标准适用于来自常压和减压蒸馏、热加工、催化和加氢裂化过程的渣油，如符合GB 25989-2010产品分类中的F-R1、F-R2、F-R3和F-R4级别的样品，GB/T 29114-2012产品分类中的包含石油炼制中重组分的石油燃料样品，以及原油。本标准不适用于沥青质质量分数小于0.05%的样品，并且对于已经发生沥青质絮凝的不稳定样品得不到滴定终点。

Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection)

JIS K 2537:2015 石油产品.烟点测定

Petroleum products -- Determination of smoke point

DB50/T 635-2015 M15车用甲醇汽油

本标准适用于重庆市内生产和使用的由车用汽油（符合GB 17930）和不大于15 %（体积分数）的燃料甲醇(燃料甲醇指符合GB/T 23510 要求的产品)及改善使用性能的添加剂组成的M15车用甲醇汽油。

M15 methanol gasoline for vehicles

EN 16709:2015 汽车燃料.高脂肪酸甲酯(FAME)柴油(B20 and B30).要求和测试方法

This European Standard specifies requirements and test methods for marketed and delivered high FAME (B20 and B30) diesel fuel for use in diesel engine vehicles designed or subsequently adapted to run on high FAME (B20 and B30) fuel. High FAME (B20 and B30) diesel fuel is a mixture of up to 20 % (V/V) in total and up to 30 % (V/V) in total respectively fatty acid methyl esters (commonly known as FAME) complying to EN 14214 and automotive diesel fuel complying to EN 590. For maintenance and control reasons high FAME (B20 and B30) diesel fuel is to be used in captive fleets that are intended to have an appropriate fuel management (see Clause 3). NOTE 1 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction and the volume fraction. NOTE 2 In this European Standard, A-deviations apply (see Annex A).

Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods

ISO 20844:2015 石油和相关产品.用柴油喷射器喷嘴测定含高聚物油的剪切稳定性

This International Standard specifies a method to assess the resistance to shear stresses applied to mineral oils, synthetic oils, and other fluids containing polymers, when passed through a specified diesel injector nozzle. The shear stability is measured by the change in viscosity of the fluid under test, brought about by the polymer degradation during stress. Under normal circumstances, this International Standard is applied to hydraulic fluids of categories HR and HV as defined in ISO 6743-4[1] and specified in ISO 11158 [2], but it may also be applied to fire-resistant hydraulic fluids within categories HFA, HFB, HFC, and HFD, with modified conditions as specified in ISO 12922[3]. No formal correlation has been established between the viscosity loss, or the absence of viscosity loss, obtained using the procedures described in this International Standard and that of oils and fluids in actual service. However, it provides standardized conditions for the evaluation of polymer stability under minimized thermal and oxidative stresses. It is normally used by manufacturers of fluids and additives, and users, as a means of ranking existing and potential formulations. NOTE Changes to properties other than viscosity are specified in some specifications, but these are not covered by the procedures specified in this International Standard.

Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle

BS EN 16715:2015 液化石油产品. 中间馏分燃料的点火延迟和衍生十六烷值 (DCN) 的测定. 使用通过直接燃油喷射进行的定容燃烧室测定点火延迟和燃烧延迟

Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection