E90 石油勘探、开发、集输设备综合 标准查询与下载

ISO 10426-2:2003 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验

This part of ISO 10426 specifies requirements and gives recommendations for the testing of cement slurries and related materials under simulated well conditions.

Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements

DIN EN ISO 13691:2003 石油和天然气工业.高速专用齿轮机构

This International Standard contains requirements for high-speed special-purpose gear units in the petroleum and natural gas industries.

Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002

BS EN ISO 10437:2003 石油、石油化学和天然气工业.专用汽轮机设备

ISO 10437:2003 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of special-purpose steam turbines. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment. It is not applicable to general-purpose steam turbines, which are covered in ISO 10436.

Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications

ISO 13503-1:2003 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量

This part of ISO 13503 provides consistent methodology for determining the viscosity of completion fluids used in the petroleum and natural gas industries. For certain cases, methods are also provided to determine the rheological properties of a fluid.

Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids

SY/T 10048-2003 腐蚀管道评估的推荐作法

Recommended practice for evaluation of corroded pipelines

ANSI/NACE MR0175-2003 油田设备用的硫化耐应力断裂的金属材料

This standard presents metallic material requirements to provide resistance to sulfide stress cracking (SSC) and/or stress corrosion cracking (SCC) for petroleum production, drilling, gathering and flow line equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and/or SCC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower-strength steels used for pipelines and vessels may be subjected to failure by hydrogen-induced cracking (blistering and stepwise cracking) as a result of hydrogen damage associated with general corrosion in the presence of H2S.

Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment

ISO 10442:2002 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机

This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers. NOTE In this International Standard, where practical, US customary units have been included in brackets for information.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors

BS EN ISO 13631:2002 石油和天然气工业.整装往复式气体压缩机

ISO 13631:2002 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas. It is also applicable to all necessary auxiliary equipment, such as water and gas coolers, silencers, emission control equipment, filters, separators, control panel, piping, etc., required to install an operable unit in compliance with the purchase specifications and with the intent of minimizing field construction and field-purchased equipment. ISO 13631:2002 is not applicable to the following: reciprocating compressors for petroleum and natural gas industries covered by ISO 13707; column-mounted compressors; non-lubricated compressors; compressors having trunk-type (automotive-type) pistons that also serve as crossheads; utility or instrument air compressors with a discharge gauge pressure of 0,9 MPa (9 bar) or less; compressors driven by diesel engine, gas turbine and steam turbine prime movers.

Petroleum and natural gas industries. Packaged reciprocating gas compressors

ISO 10426-1:2000/Amd 1:2002 石油和天然气工业.油井固井用水泥和材料.第1部分:规范.修改1

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification; Amendment 1

ISO 16812:2002 石油和天然气工业.壳管式热交换器

This International Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum and natural gas industries. This International Standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. This International Standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters.

Petroleum and natural gas industries - Shell-and-tube heat exchangers

SY/T 10043-2002 泄压和减压系统指南

本标准适用于压力泄放和蒸汽减压系统。提供的资料是用来帮助选择最适用于各种装置在出现危险情况时的泄压和减压系统。本标准的目的是补充API RP 520 I 炼油厂压力泄放装置的尺寸确定、选择和安装第一部分尺寸确定和选择(第五版)所规定的作法，以便确立一个设计依据。 本标准为分析超压的主要原因、确定单项释放量以及选择和设计诸如容器、火炬和放空塔在内的处理系统提供了指南。 在本标准5.4.1中提出了与泄压系统有关的管线资料。但是，实际管线应按照ASME(美国机械工程师学会)B31.3或其他适用的规范进行设计。 健康危险与压力泄放设备的操作可能有关。特殊风险的讨论超出了本标准的范围。

Pressure Relief and Pressure Relief Systems Guide

BS EN 12979:2002 汽车液化石油气设备.安装要求

Automotive LPG systems - Installation requirements

BS EN ISO 13691:2002 石油和天然气工业.专用高速齿轮组件

Petroleum and natural gas industries. High-speed special-purpose gear units

ISO 15156-1:2001 石油和天然气工业 石油制品和天然气生产中含硫化氢（H2S）环境下使用的材料 第1部分：耐破裂材料的一般选择指南

This part of ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural gas sweetening plants in H2S-containing environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This part of ISO 15156 addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking and galvanically induced hydrogen stress cracking. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. This part of ISO 15156 is not necessarily applicable to equipment used in refining or downstream processes and equipment. CAUTION — Metallic materials selected or qualified using ISO 15156 are resistant to cracking in defined H2S-containing environments in oil and gas production, but are not necessarily immune under all service conditions.

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

BS ISO 4269:2001 石油和液化石油产品.通过液体测量进行油箱校准.使用容积测量仪的递增法

This International Standard specifies a method for the calibration of tanks by addition of batches of liquid. The liquid is used as a volume-transfer medium, measured accurately by means of a meter. This International Standard is not applicable to the calibration of reference measuring instruments, proving tanks, or meter provers. NOTE Applicable standards are given in the bibliography.

Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters

BS EN ISO 17776:2002 石油和天然气工业.海上开采装置.危险识别和风险评定用工具和技术导则

Petroleum and natural gas industries. Offshore production installations. Guidance on tools and techniques for hazard identification and risk assessment

ASTM G170-01a 在实验室评价和合格鉴定油田和炼厂的腐蚀抑制剂的标准指南

1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions.1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation.1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide.1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

ASTM G170-01 在实验室评价和合格鉴定油田和炼厂的腐蚀抑制剂的标准指南

1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions.1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation.1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide.1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

SY/T 0048-2000 石油天然气工程总图设计规范

本规范适用于陆上油气田（区块）及油气输送管道工程总体布置和各类站场新建、扩建和改建工程的总图设计。

Specifications for General Drawing Design of Petroleum and Natural Gas Engineering

SY/T 5276-2000 化学防砂人工岩心抗折强度、抗压强度及气体渗透率的测定

Determination of flexural strength, compressive strength and gas permeability of chemical sand control artificial core