E91 石油物探测井设备与仪器 标准查询与下载

SY/T 5524-2004 石油地震勘探钻机车

本标准规定了石油地震勘探钻机车的型式、型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于用二类底盘或整车改装的石油地震勘探、工程物探、水文勘探、金属及非金属矿藏勘探、化探用钻机车的生产、制造和验收。

Oil seismic exploration drilling rig

BS EN ISO 10427-2:2004 石油和天然气工业.良好胶结设备.扶正器的放置和限动环的检测

ISO 10427-2:2004 provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results.

Petroleum and natural gas industries - Equipment for well cementing - Centralizer placement and stop-collar testing

SY/T 6579-2003 密度测井仪校准方法

本标准规定了石油工业地层密度测井仪的校准基本要求和校准方法。本标准适用于密度类测井仪的体积密度的校准。

The calibration method for density tool

DIN EN ISO 13631:2003 石油和天然气工业.封装往复式空气压缩机

The document gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of package skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas.#,,#

Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002

DIN EN ISO 10440-2:2003 石油和天然气工业.旋转型容积式压缩机.第2部分:封装空气压缩机(无油)

Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001

ISO 13628-8:2002 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口

This part of ISO 13628 gives functional requirements and guidelines for ROV interfaces on subsea production systems for the petroleum and natural gas industries. It is applicable to both the selection and use of ROV interfaces on subsea production equipment, and provides guidance on design as well as the operational requirements for maximising the potential of standard equipment and design principles. The auditable information for subsea systems it offers will allow interfacing and actuation by ROV-operated systems, while the issues it identifies are those that have to be considered when designing interfaces on subsea production systems. The framework and detailed specifications set out will enable the user to select the correct interface for a specific application.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems

ISO 13679:2002 石油和天然气工业.套管和管连接的测试程序

This International Standard establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer's claimed test load envelope and limit loads. It categorizes test severity into four test classes. It describes a system of identification codes for connections. This International Standard does not provide the statistical basis for risk analysis. This International Standard addresses only three of the five distinct types of primary loads to which casing and tubing strings are subjected in wells: fluid pressure (internal and/or external), axial force (tension or compression), bending (buckling and/or wellbore deviation), as well as make-up torsion. It does not address rotation torsion and non-axisymetric (area, line or point contact) loads. This International Standard specifies tests to be performed to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. The words casing and tubing apply to the service application and not to the diameter of the pipe.

Petroleum and natural gas industries - Procedures for testing casing and tubing connections

ISO 15546:2002 石油和天然气工业.铝合金钻杆

This International Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints for use in drilling and production operations in the petroleum and natural gas industries.

Petroleum and natural gas industries - Aluminium alloy drill pipe

DIN EN ISO 13533:2002 石油工业和天然气工业.钻井和生产设备.钻井设备 (ISO 13533:2001); 德文版本 EN ISO 13533:2001 (德文和英文本)

This International Standard contains specification for drill-through equipment.

Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)

ISO 13625:2002 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器

This International Standard specifies requirements and gives recommendations for the design, rating, manufacturing and testing of marine drilling riser couplings. Coupling capacity ratings are established to enable the grouping of coupling models according to their maximum stresses developed under specific levels of loading, regardless of manufacturer or method of make-up. This International Standard relates directly to API RP 16Q, which provides guidelines for the design, selection, and operation of the marine drilling riser system as a whole.

Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings

ISO 10416:2002 石油和天然气工业.钻用冲洗液.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or "make-up" fluid. It is not intended as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing temperature are presented because the agitation history and temperature have a profound effect on drilling fluid properties.

Petroleum and natural gas industries - Drilling fluids - Laboratory testing

SY/T 6539-2002 BOX地震数据采集系统检验项目及技术指标

本标准规定了BOX地震数据采集系统的年、月、日检验项目及技术指标。 本标准适用于BOX地震数据采集系统的测试、检验和维护。

The checking items and technical specifications for BOX seismic data acquisition system

BS EN ISO 10427-1:2002 石油和天然气工业.套管扶正器.弓形弹簧套管扶正器

Petroleum and natural gas industries. Casing centralizers. Bow-spring casing centralizers

ISO 13533:2001 石油和天然气工业.钻井和生产设备.钻井设备

This International Standard specifies requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing and shipping of drill-through equipment used for drilling for oil and gas. It also defines service conditions in terms of pressure, temperature and wellbore fluids for which the equipment will be designed. This International Standard is applicable to and establishes requirements for the following specific equipment: a) ram blowout preventers; b) ram blocks, packers and top seals; c) annular blowout preventers; d) annular packing units; e) hydraulic connectors; f) drilling spools; g) adapters; h) loose connections; i) clamps. Dimensional interchangeability is limited to end and outlet connections. Typical equipment defined by this International Standard is shown in Figures 1 and 2; recommendations for failure reporting are outlined in annex F. This International Standard does not apply to field use or field testing of drill-through equipment.

Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment

ISO 14310:2001 石油和天然气工业 下井设备 封隔器和桥塞

This International Standard provides requirements for packers and bridge plugs for use in the petroleum and natural gas industry. Application of this International Standard is limited to those products meeting the definition of a packer or bridge plug intended for petroleum and natural gas industry subsurface operations. This International Standard applies only to product applications within a conduit. Installation and maintenance of these products is outside the scope of this International Standard.

Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs

ISO 13691:2001 石油和天然气工业 特殊用途高速传动装置

This International Standard specifies the minimum requirements for enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications. Such applications will typically be required to operate continuously for extended periods, without installed spare equipment and are critical to the continued operation of the installation. By agreement this International Standard may be used for other services. This International Standard also specifies a method of rating gears which meet the following criteria: a) gear accuracy — teeth accuracy: accuracy grade 4 or better as given in ISO 1328-1:1995, for both single pitch deviation, fpt' and total cumulative pitch deviation, Fp' — total helix deviation Fβ between the helices of the pinion and wheel: accuracy grade 4 or better as given in ISO 1328-1:1995; b) range of the transverse contact ratios: 1,2 < εα < 2,0; c) overlap ratio εβ ≥ 1,0; d) helix angle: 5 ≤β≤35°; e) working flanks of the pinion or gear: provided with profile modifications to obtain a good conjugate tooth load distribution along the path of contact; f) working flanks of pinion or gear: modified as necessary to compensate for both torsional and bending deflections and, when necessary for gears with pitch line velocities in excess of 100 m/s, also for thermal distortions; g) gear lubrication: straight mineral oil, viscosity grade VG-32 or VG-46 (see ISO 3448); h) material of the gear teeth: quality MQ or better, in accordance with ISO 6336-5:1996.

Petroleum and natural gas industries - High-speed special-purpose gear units

ISO 16070:2001 石油和天然气工业 下井设备 锁定心轴和定位接头

本标准规定了石油和天然气工业中川于油井生产(注水)管柞中安装流量控制或具他工兄的锁定心 轴与定位接头的功能、技术和制造要求。本标准适用于与流量控制或其他[：具的接IS连接，而不适用于 与油管的连接。

Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples

SY/T 5557-2001 石油固井成套设备型式与基本参数

本标准规定了石油固井成套设备的范围、型式、基本参数及连接尺寸。 本标准适用于陆上石油固井用成套设备的设计、制造和选用，也适用于海上固井设备。

Types and basic parameters of complete sets of oil cementing equipment

DIN EN ISO 13534:2001 石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造

The document gives guidelines and establishes requirements for inspection, maintenance, repair and remanufacture of items of hoisting equipment used in drilling and production operations, in order to maintain the serviceability of this equipment.#,,#

Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000

BS EN ISO 13535:2001 石油和天然气工业.钻井和生产设备.提升设备

This International Standard provides requirements for the design, manufacture and testing of hoisting equipment suitable for use in drilling and production operations. This International Standard is applicable to the following drilling and production hoisting equipment: a) hoisting sheaves; b) travelling blocks and hook blocks; c) block-to-hook adapters; d) connectors and link adapters; e) drilling hooks; f) tubing hooks and sucker-rod hooks; g) elevator links; h) casing elevators, tubing elevators, drill-pipe elevators and drill-collar elevators; i) sucker-rod elevators; j) rotary swivel-bail adapters; k) rotary swivels; I) power swivels; m) power subs; n) spiders, if capable of being used as elevators; o) wire-line anchors; p) drill-string motion compensators; q) kelly spinners, if capable of being used as hoisting equipment; r) pressure vessels and piping mounted onto hoisting equipment; s) safety clamps, if capable of being used as hoisting equipment; t) guide dollies (annex B). This International Standard establishes requirements for two product specification levels (PSLs). These two PSL designations define different levels of technical requirements. All the requirements of clause 4 through clause 11 are applicable to PSL 1 unless specifically identified as PSL 2. PSL 2 includes all the requirements of PSL 1 plus the additional practices as stated herein. Supplementary requirements apply only when specified. Annex A gives a number of standardized supplementary requirements.

Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment - Hoisting equipment