E98 油、气集输设备 标准查询与下载

SY/T 6793-2018 油气输送管道线路工程水工保护设计规范

为了在油气输送管道线路工程水工保护设计中贯彻执行国家现行的有关方针政策，统一设计技术标准，使油气输送管道线路工程水工保护设计符合安全适用、技术先进、经济合理的要求，制成本规范。 本规范适用于陆上新建、扩建或改建的油气管道线路工程以及在役油气管道线路维修工程的水工保护设计。 水工保护设计除应符合本规范外，尚应符合国家现行有关标准的规定。

Code for design of oil and gas transportation pipeline hydraulic protection

BS EN 12819:2019 液化石油气设备及配件 大于 13m$u3 的液化石油气压力容器的检验和重新鉴定

This European Standard specifies requirements for: a) routine inspection periodic inspection and requalification of fixed overground LPG storage tanks of sizes greater than 13 m, and associated fittings; b) marking tanks and/or keeping records, as appropriate, as a result of routine inspection, periodic inspection and requalification. This European Standard excludes refrigerated storage.

LPG equipment and accessories. Inspection and requalification of LPG pressure vessels greater than 13 m$u3

SY/T 7403-2018 油气输送管道应变设计规范

Specification for strain design of oil and gas transmission pipelines

SY/T 6896.4-2018 石油天然气工业特种管材技术规范 第4部分：钛合金套管

Technical specifications for special pipes for the oil and gas industry Part 4: Titanium alloy casing

DIN EN 1440:2018 液化石油气设备和附件. 液化石油气 (LPG) 用可运输可再充装传统焊接和钎焊钢瓶. 定期检查; 德文版本EN 1440-2016+A1-2018

This European Standard specifies procedures for the periodic inspection and testing, of transportable refillable LPG cylinders with a water capacity from 0,5 l up to and including 150 l. This European Standard is applicable to welded and brazed steel LPG cylinders with a specified minimum wall thickness designed according to EN 1442, EN 12807, EN 13322-1, or equivalent standard (e. g. national codes). This European Standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders) and also to existing non RID/ADR cylinder populations. NOTE The requirements of RID/ADR take precedence over those of this standard in the case of cylinders complying with that regulation, including pi marked cylinders. This European Standard does not apply to cylinders permanently installed in vehicles.

LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection; German version EN 1440:2016+A1:2018

DIN EN 12493:2018 液化石油气(LPG)设备和附件. 液化石油气(LPG)用焊接钢罐. 油槽车的设计和生产; 德文版本EN 12493-2013+A2-2018

This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.There is no upper size limit as this is determined by the gross vehicle weight limitation.This European Standard does not cover pressure vessels for pressure vessel containers. NOTE 1 In the context of this standard the term "road tanker" is understood to mean ?fixed tanks? and ?demountable tanks? as defined in ADR. NOTE 2 The equipment for the pressure vessels and the inspection and testing after assembly is covered by EN 12252, and EN 14334, respectively. NOTE 3 The design type of the road tanker is subject to approval by the competent authority, as required by ADR. NOTE 4 This European Standard is intended for LPG only, however for other liquefied gases see EN 14025.

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture; German version EN 12493:2013+A2:2018

DIN EN ISO 16923:2018 天然气燃料供应站.燃料车辆的CNG站(ISO 16923-2016); 德文版本EN ISO 16923-2018

The standard covers design, construction, operation, inspection and maintenance of stations for fuelling compressed natural gas (CNG) to vehicles; including equipment, safety and control devices.The standard also applies to portions of a fuelling station where natural gas is in a gaseous state and dispensing CNG derived from liquefied natural gas (LCNG) according to ISO 16924. The document applies to fuelling stations supplied with natural gas as defined in local applicable gas composition regulations or ISO 13686. It also applies to other gases meeting these requirements including biomethane, upgraded coal-bed methane (CBM) and gas supplies coming from LNG vaporization (on-site or off-site). The standard includes all equipment downstream of the gas supply connection (i.e. point of separation between the CNG fuelling station piping and the pipeline network). Fuelling station nozzles are not defined in this standard.

Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016); German version EN ISO 16923:2018

DIN EN ISO 24817:2018 石油, 石化和天然气工业.用于管道工程的复合材料修理.质量鉴定和设计,安装,测试和检查(ISO 24817-2017);英文版本EN ISO 24817-2017

This document gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repair systems to corroded or damaged pipework, pipelines, tanks and vessels used in the petroleum, petrochemical and natural gas industries.

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017

DIN EN ISO 14692-1:2018 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料(ISO 14692-1-2017);英文版本N ISO 14692-1-2017

This document defines the applications, pressure rating methodology, the classification of the products according to application, type of joint and resin matrix and the limitations to both the materials of construction and the dimensions. It also lists the terms, definitions and symbols used and provides guidance in the use and interpretation of ISO 14692-2, ISO 14692-3 and ISO 14692-4. ISO 14692 (all parts) is applicable to GRP piping systems that 1) utilize joints that are capable of restraining axial thrust from internal pressure, temperature change and fluid hydrodynamic forces and 2) have a trapezoidal shape for its design envelope. It is primarily intended for offshore applications on both fixed and floating topsides facilities, but it can also be used for the specification, manufacture, testing and installation of GRP piping systems in other similar applications found onshore, e. g. produced-water, firewater systems and general industrial use. For floating installations, reference is made to the design, construction and certification standards for the hull or vessel, since these can allow alternative codes and standards for GRP piping associated with marine and/or ballast systems. However, it is recommended that ISO 14692 (all parts) be used for such applications to the maximum degree attainable. ISO 14692 (all parts) can also be used as the general basis for specification of pipe used for pump caissons, stilling tubes, I-tubes, seawater lift risers and other similar items.

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017

DIN EN ISO 14692-3:2018 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计(ISO 14692-3-2017);英文版本EN ISO 14692-3-2017

This document gives guidelines for the design of GRP piping systems. The requirements and recommendations apply to layout dimensions, hydraulic design, structural design, detailing, fire endurance, spread of fire and emissions and control of electrostatic discharge. This document is intended to be read in conjunction with ISO 14692-1.

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017); English version EN ISO 14692-3:2017

DIN EN ISO 14692-4:2018 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作(ISO 14692-4-2017);英文版本EN ISO 14692-4-2017

This document gives requirements and recommendations for the fabrication, installation, inspection and maintenance of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing, maintenance and repair. It is intended to be read in conjunction with ISO 14692-1.

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017

BS EN ISO 14692-4:2017 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.制造、安装和运行

Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation

BS EN ISO 14692-3:2017 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.系统设计

Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design

BS EN ISO 14692-1:2017 石油和天然气工业 玻璃增强塑料(GRP)管道 词汇、符号、应用和材料

Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials

BS EN ISO 14692-2:2017 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.合格评定和生产

Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Qualification and manufacture

DIN EN ISO 16923:2017 天然气加油站. CNG汽车加油站(ISO 16923:2016)；德文和英文版本prEN ISO 16923:2017

The standard covers design, construction, operation, inspection and maintenance of stations for fuelling compressed natural gas (CNG) to vehicles; including equipment, safety and control devices.The standard also applies to portions of a fuelling station where natural gas is in a gaseous state and dispensing CNG derived from liquefied natural gas (LCNG) according to ISO 16924.The standard applies to fuelling stations supplied with natural gas as defined in local applicable gas composition regulations or ISO 13686. It also applies to other gases meeting these requirements including biomethane, upgraded coal-bed methane (CBM) and gas supplies coming from LNG vaporization (on-site or off-site).The standard includes all equipment downstream of the gas supply connection (i.e. point of separation between the CNG fuelling station piping and the pipeline network). Fuelling station nozzles are not defined in this standard.The scope of this standard includes fuelling stations of the following characteristics: slow fill; fast fill; private access; public access (self-service or assisted); fuelling stations with fixed storage; fuelling stations with mobile storage (daughter station); multi-fuel stations.

Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016); German and English version prEN ISO 16923:2017

BS EN ISO 24817:2017 石油,石化和天然气工业.管道综合修理.资格认定,设计,安装,测试和检验

Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection

BS EN ISO 21809-5:2017 石油和天然气工业 管道运输系统中使用的埋地或水下管道的外部涂层 外部混凝土涂料

Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. External concrete coatings

ISO 13623:2017 石油和天然气工业.管道输送系统

This document specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries. It applies to pipeline systems on-land and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered by this document is illustrated in Figure 1. This document applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics. This document is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it applies retroactively to existing pipeline systems. It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment.  1  Key 1 wellsite 2 gathering station, treatment plant or process plant 3 liquid 4 gas 5 pump station 6 valve station 789101112 pipeline elements covered by this document tankage refinery depot distribution compressor station pressure-reduction station connections with other facilities (the pipeline system should include an isolation valve at connections with other facilities and at branches) pipeline elements not covered by this document station/plant area covered by this document Figure 1 — Extent of pipeline systems covered by this document 2  

Petroleum and natural gas industries - Pipeline transportation systems

BS EN 1439:2017 液化石油气(LPG)设备和附件.LPG瓶灌装前、灌装中和灌装后的可运输、可再填充检测用程序

LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling