F14 海洋能 标准查询与下载

GB/T 33543.3-2017 海洋能术语 第3部分：电站

GB/T 33543的本部分界定了海洋能在发电技术、电站设备的相关术语及其定义。 本部分适用于海洋能电站及其相关领域。

Ocean energy terminology—Part 3: Power station

GB/T 33543.2-2017 海洋能术语 第2部分：调查和评价

Ocean energy terminology—Part 2：Survey and assessment

GB/T 33543.1-2017 海洋能术语 第1部分：通用

GB/T 33543的本部分界定了有关海洋能的通用术语及其定义。 本部分适用于海洋能及其相关领域。

Ocean energy terminology—Part 1：General

GB/T 33441-2016 海洋能调查质量控制要求

本标准规定了海洋能调查中外业调查、数据处理、图件绘制和资料交换等方面的质量控制要求。 本标准适用于潮汐能、潮流能、波浪能、温差能、盐差能、海洋风能等海洋能资源调查与评估。

Quality control requirment of ocean energy investigation

GB/T 33442-2016 海洋能调查仪器设备通用技术条件

本标准规定了海洋能调查仪器设备的分类与型号命名、基本参数要求、通用要求、试验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于潮汐能、潮流能、波浪能、温差能、盐差能和海洋风能相关调查仪器设备的研制、设计、生产、使用及相关产品标准的编制。

General technical specification of the instruments and equipments for ocean energy survey

GB 6492-1986 航天用标准太阳电池

Standard Solar Cells for Aerospace

GB 6493-1986 地面用标准太阳电池

Terrestrial standard solar cell

GB/T 6494-1986 航天用太阳电池电性能测试方法

本标准适用于无聚光器的航天用单体太阳电池、太阳电池组件、太阳电池组合板和太阳电池方阵，以及工作标准太阳电池电性能的测试。 本标准不适用于一级和二级标准太阳电池的测试。

Measurement procedures for electrical characteristics of astronautic solar cells

GB 6495-1986 地面用太阳电池电性能测试方法

Measurement procedures for electrical characteristics of terrestrial solar cells

GB/T 6496-1986 航天用太阳电池标定的一般规定

本标准规定了航天用单晶硅太阳电池标定的一般技术要求以及产生一级标准太阳电池的程序。

The general rules of astronautic solar cell calibration

GB/T 6497-1986 地面用太阳电池标定的一般规定

本标准规定了地面用单晶或多晶硅太阳电池标定的一般技术要求以及产生一级标准太阳电池的程序。

The general rules of terrestrial solar cell calibration

GB 6497-1986 地面用太阳电池标定的一般规定

General provisions for calibration of solar cells for terrestrial use

GB/T 6492-1986 航天用标准太阳电池

本标准适用于单晶硅太阳电池。供测试航天用硅太阳电池的单体、组件、组合板、方阵时，校准或确定测试光源在被测太阳电池表面所建立的总辐照度用。

Astronautic standard solar cell

NB/T 10442-2021 波浪能和潮流能转换装置研发基本程序

Basic procedures for the development of wave energy and tidal energy conversion devices

NB/T 10442-2020 波浪能和潮流能转换装置研发基本程序

Basic procedures for research and development of wave energy and tidal current energy conversion devices

IEC TS 62600-100:2012/COR1:2017 海洋能源. 波浪, 潮汐能和其他水流转换器. 第100部分: 发电波浪能转换器的动力性能评定; 技术勘误表1

Marine energy - Wave, tidal and other water current converters - Part 100: Power performance assessment of electricity producing wave energy converters; Technical Corrigendum 1

DIN IEC/TS 62600-101:2017 海洋能源.波浪,潮汐能和其他水流转换器.第101部分:波能源评价及特性描述(IEC/TS 62600-101-2015)

Marine energy - Wave, tidal and other water current converters - Part 101: Wave energy resource assessment and characterization (IEC/TS 62600-101:2015)

IEC TS 62600-102:2016 海洋能源. 波浪, 潮汐能和其他水流转换器. 第102部分: 使用测量的评定数据在辅助位置的波浪能转换器动力性能评定

Wave Energy Converters (WEC) need to be designed to operate efficiently at different locations. Systematic methods should be used to evaluate the power performance of a WEC at a second location (hereinafter Location 2) based on power performance assessment at a first location (hereinafter Location 1). The degree of similarity of the measured WEC (WEC 1) and the metocean conditions at Location 1 to the secondary WEC (WEC 2) at Location 2 determine the methodology and the applicability of this technical specification. This part of IEC 62600, which is a Technical Specification, describes the required methods and the required conditions to determine the power performance of the WEC 2 in Location 2, possibly at a different scale and with configuration changes to accommodate the new site conditions, in all cases based on measured power performance of WEC 1 in Location 1. This technical specification allows for assessment at Location 1 or Location 2 based on limited/incomplete data material, as long as this is accompanied by a validated numerical model or physical model and assessment of the uncertainty involved. Another key element is transparency in the assessment. This technical specification includes: a) Specification of data requirements needed from the original measurements at Location 1 including an assessment of the uncertainty involved (if based on limited/incomplete data material) in addition to those specified in IEC TS 62600-100 and IEC TS 62600-101. b) Limitation on the changes that are allowed to the WEC and the specification of the location. c) Wave data required at Location 2, as a minimum the requirements found in IEC TS 62600-101. d) Development of the power matrix at Location 2. e) Validation of the power matrix at Location 2. f) Assessment of uncertainties in the derived performance parameters at Location 2. g) Requirements for the allowable power performance transfer by geometric, kinematic and dynamic similarity. h) Requirements for the allowable incorporation of additional empirical model data. i) Requirements for the allowable incorporation of additional numerical model data. The technical specification does not cover the following items: j) The original data measurement at Location 1 (see IEC TS 62600-100). k) Environmental concerns. l) Operation and maintenance.

Marine energy - Wave, tidal and other water current converters - Part 102: Wave energy converter power performance assessment at a second location using measured assessment data

HY/T 182-2015 海洋能计算和统计编报方法

本标准规定了潮汐能、潮流能、波浪能、海洋温差能、海洋盐差能和海洋风能的计算、统计及编报方法。 本标准适用于潮汐能、潮流能、波浪能、海洋温差能、海洋盐差能和海洋风能普查中对能量的计算及统计。

Methodology of ocean energy calculation and statistical compilation

IEC TS 62600-101:2015 海洋能源. 波浪, 潮汐能和其他水流转换器. 第101部分: 波浪能源评定和特性描述

This part of IEC 62600, which is a Technical Specification, establishes a system for estimating, analysing and reporting the wave energy resource at sites potentially suitable for the installation of Wave Energy Converters (WECs). This Technical Specification is to be applied at all stages of site assessment (from initial investigations to detailed project design) and in conjunction with the IEC Technical Specification on WEC performance (IEC TS 62600- 100) enables an estimate of the annual energy production of a WEC or WEC array to be calculated. This Technical Specification is not intended for estimation of extreme wave conditions. The wave energy resource is primarily defined using hydrodynamic models that are successfully validated against measurements. The framework and methodologies prescribed in this Technical Specification are intended to ensure that only adequate models are used, and that they are applied in an appropriate manner to ensure confidence and consistency in the reported results. Moreover, the document prescribes methods for analysing metocean data (including the data generated by modelling) in order to properly quantify and characterize the temporal and spatial attributes of the wave energy resource, and for reporting the results of a resource assessment in a comprehensive and consistent manner.

Marine energy - Wave, tidal and other water current converters - Part 101: Wave energy resource assessment and characterization