F23 电站、电力系统运行检修 标准查询与下载



共找到 309 条与 电站、电力系统运行检修 相关的标准,共 21

本标准规定了工业用氢氧化钠纯度及杂质含量的测定方法。本方法适用于火电厂用工业氢氧化钠纯度的测定。

Test method for sodium hydroxide for industrial use in fossil-flred power plant

ICS
27.100
CCS
F23
发布
2015-07-01
实施
2015-12-01

本标准规定了采用无人机对架空输电线路进行巡检的巡检系统、巡检作业要求、巡检前准备、巡检方式及方法、巡检模式及内容、巡检资料的整理及移交、异常情况处置等。 本标准适用于采用固定翼无人机、旋翼无人机对架空输电线路进行的巡检作业。

Technical guide of unmanned aerial vehicle inspection for overhead transmission line

ICS
29.240.20
CCS
F23
发布
2015-07-01
实施
2015-12-01

Process diagrams for power plants. Specification for diagrams

ICS
01.080.30;27.100
CCS
F23
发布
2015-06-30
实施
2015-06-30

Process diagrams for power plants. Graphical symbols

ICS
01.080.30;27.100
CCS
F23
发布
2015-04-30
实施
2015-04-30

本标准规定了 35 kV 及以上的六氟化硫(SF6)具有电压互感器功能的高压站用变的术语和定义、使用条件、额定值、设计要求、试验方法、标志、包装和贮运。 本标准适用于额定频率 50 Hz(或 60 Hz)、额定电压 35 kV 及以上电压等级系统中SF6气体绝缘具有电压互感器功能的高压站用变。

SF6 gas insulated transformer with voltage transformer function for high voltage station

ICS
29.240
CCS
F23
发布
2015-04-16
实施
2015-07-16

本标准规定了燃煤电厂SCR烟气脱硝流场模拟技术的数值模拟、物理模型实验等内容。 本标准适用于燃煤电厂SCR烟气脱硝流场模拟,其他SCR脱硝系统可参照执行。

Flow field simulation technical specification for SCR flue gas denitration system of coal-fired power plants

ICS
27.100
CCS
F23
发布
2015-04-02
实施
2015-09-01

本标准规定了火力发电厂技术经济指标的计算方法。本标准适用于火力发电厂技术经济指标的统计计算和评价。

Calculating method of economical and technical index for thermal power plant

ICS
27.100
CCS
F23
发布
2015-04-02
实施
2015-09-01

Power quality measurement in power supply systems - Part 1 : power quality instruments (PQI)

ICS
29.240.01;33.100.99
CCS
F23
发布
2014-11-01
实施
2014-11-01

Power quality measurement in power supply systems - Part 2 : functional tests and uncertainty requirements

ICS
29.240.01;33.100.99
CCS
F23
发布
2014-11-01
实施
2014-11-01

本标准规定了架空输电线路跳线的术语、分类、结构型式、型号命名方法、一般技术要求、材料及工艺、试验方法及验收规则、标志与包装等内容。 本标准适用于110 (66) kV~1000kV交流和±100kV~±800kV直流架空输电线路跳线。

Technical requirements for jumper of overhead transmission lines

ICS
27.100
CCS
F23
发布
2014-10-15
实施
2015-03-01

本导则适用于蒸发量为65t/h及以上、用于发电的循环流化床锅炉内衬砌筑。

Technical guidance of CFB boiler refractory construction

ICS
27.100
CCS
F23
发布
2014-10-15
实施
2015-03-01

本标准给出了交流电力系统金属氧化物避雷器的使用条件、类型、参数选用、试验和检验规则等。 本标准适用于系统标称电压为3kV~1000kV交流系统无间隙金属氧化物避雷器(以下简称无间隙避雷器),以及系统标称电压为110 (66) kV~220kV敞开式变电站用于保护线路入口设备免受多重雷电过电压损坏的有串联间隙金属氧化物避雷器(以下简称有间隙避雷器)。 本标准不适用于线路防雷用金属氧化物避雷器。

Application guide of metal oxide surge arresters for a.c. power system

ICS
27.100
CCS
F23
发布
2014-10-15
实施
2015-03-01

本标准规定了汽轮机电液调节系统用磷酸酯抗燃油的质量标准和运行维护的基本要求。 本标准适用于汽轮机电液调节系统用磷酸酯抗燃油的维护。

Guide for operation and maintenance of phosphate ester fire-resistant fluid used in power plant

ICS
27.100
CCS
F23
发布
2014-10-15
实施
2015-03-01

Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems

ICS
CCS
F23
发布
2014-03-27
实施

本标准规定了碳钢、合金钢和奥氏体不锈钢对焊管件的基本要求。本标准适用于火力发电厂所用钢制对焊管件及核电站内非核级钢制对焊管件。

Steel butt-welding fittings for power plant

ICS
23.040.10
CCS
F23
发布
2014-03-18
实施
2014-08-01

This Standard provides guidelines for operating equipment walkdowns that are designed to ultimately improve the thermal performance and efficiency of the power plant. Following these guidelines may also lead to more proactive maintenance practices, which can also be expected to improve the reliability of the plant. This Standard provides guidelines for walkdowns of power plants using fossil fuels during operating periods. Some portions may be applicable to other types of power plants. This Standard contains a series of sections, each pertaining to specific equipment and/or systems commonly found in power plants. Inspections covered in this Standard are intended to take place during plant operation. Each section of this Standard can be used independently and includes recommendations on what to look for during inspections.

Operating Walkdowns of Power Plants

ICS
CCS
F23
发布
2014
实施
2015-1-21

Photovoltaic power station operating procedures

ICS
27.160
CCS
F23
发布
2013-11-07
实施
2013-11-07

Photovoltaic power station maintenance procedures

ICS
27.160
CCS
F23
发布
2013-11-07
实施
2013-11-07

This International Standard describes a method for calculating the minimum approach distances for live working, at maximum voltages between 72,5 kV and 800 kV. This standard addresses system overvoltages and the working air distances or tool insulation between parts and/or workers at different electric potentials. The required withstand voltage and minimum approach

Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation

ICS
13.260;29.240.20;29.260.99
CCS
F23
发布
2013-04
实施

本标准规定了水电站设备状态检修管理的基本原则、管理体系及职责、技术支持系统和工作程序。本标准适用于大中型常规水电站设备状态检修管理,其他类型水电站可参照本标准执行。

Guide of condition based maintenance management for hydropower station equipments

ICS
27.100
CCS
F23
发布
2013-03-07
实施
2013-08-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号