G16 基本有机化工原料 标准查询与下载



共找到 1038 条与 基本有机化工原料 相关的标准,共 70

本标准规定了α-甲基吡啶的技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和安全注意事项。本标准适用于从炼焦生产中回收的粗轻吡啶,经分馏制得的α-甲基吡啶。

α-methyl pyridine

ICS
71.080.99
CCS
G16
发布
2014-10-14
实施
2015-04-01

本标准规定了粗轻吡啶中吡啶及其同系物含量的测定方法的原理、试剂、仪器、试样的采取和制备、试验步骤、结果计算和允许差。本标准适用于从炼焦生产中回收的粗轻吡啶中的吡啶及其同系物含量的测定。

Determination of pyridine and homologues contents of curde light pyridine

ICS
71.080.01
CCS
G16
发布
2014-10-14
实施
2015-04-01

This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V). NOTE For the purposes of this document, the term "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, respectively.

Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

ICS
71.080.60;75.160.20
CCS
G16
发布
2014-10
实施

本标准规定了制冷剂用丙烷的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。本标准适用于制冷剂用丙烷。该产品主要以单工质或混合工质替代二氟一氯甲烷(HCFC-22)。分子式:CH。相对分子质量:44.09(按2007年国际相对原子质量)。

Propane (HC-290) for refrigerant use

ICS
71.080.20
CCS
G16
发布
2014-05-12
实施
2014-10-01

本标准规定了化学级丙烯的要求、检验规则、包装、标志、运输、贮存及安全要求。本标准适用于由炼厂气经脱硫、分离,或以加氢尾油、石脑油或煤、柴油为原料,经管式裂解炉裂解,深冷分离而制得的丙烯产品。该产品用作有机合成的原料。分子式:CH。相对分子质量:42. 081 (按2007年国际相对原子质量)。

Chemical grade propylene

ICS
71.080.10
CCS
G16
发布
2014-05-06
实施
2014-10-01

本标准规定了联苯的技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书。本标准适用于从煤焦油馏分中分离制得的联苯和由苯经热脱氢制得的联苯。

Biphenyl

ICS
77.080.99
CCS
G16
发布
2014-05-06
实施
2014-10-01

本标准规定了化学级丙烯纯度和甲烷、乙烷、乙烯、丙烷、环丙烷、异丁烷、正丁烷、丙二烯、乙炔、反-2-丁炼、1-丁烯、异丁烯、顺-2-丁烯、1, 3-丁二烯、甲基乙炔等烃类杂质测定的气相色谱法。本标准适用于纯度不低于90% (体积分数)、杂质含量不低于0.001% (体积分数)的丙烯样品的测定。由于本标准不能测定所有可能存在的杂质,如氢气、氧气、一氧化碳、二氧化碳、水、齐聚物、硫及含氧化合物等,所以要全面表征丙烯样品还需要应用其他的试验方法。

Chemical grade propylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method

ICS
71.080.10
CCS
G16
发布
2014-05-06
实施
2014-10-01

本标准规定了工业用乙烯、丙烯中微量氯测定的微库仑法。本标准适用于氯含量不低于1. 0 mg/kg的工业用乙烯、丙烯的测定。本标准并不是旨在说明与其使用有关的所有安全问题。使用者有责任采取适当的安全与健康措施,保证符合国家有关法规的规定。

Ethylene and propylene for industrial use.Determination of trace chlorine.Microcoulometric method

ICS
71.080.10
CCS
G16
发布
2014-05-06
实施
2014-10-01

本部分规定了用容量法和紫外分光光度法测定工业用乙酸乙烯酯中对苯二酚含量的方法。本部分适用于测定对苯二酚的含量为(1~20) mg/kg的工业用乙酸乙烯酯。由于试样中存在的醛、酮类化合物在295 nm也会有紫外吸收,当采用紫外分光光度法测定时,将使测定结果偏高。

Vinyl acetate for industrial use.Part 6: Determination of hydroquinone

ICS
71.080.70
CCS
G16
发布
2014-05-06
实施
2014-10-01

This specification covers a denatured ethyl alcohol in the form of a liquid.

Alcohol, Denatured Ethyl

ICS
49.025.99
CCS
G16
发布
2014-03-24
实施

This specification covers methyl alcohol in the form of a liquid.

Alcohol, Methyl

ICS
49.025.99
CCS
G16
发布
2014-03-24
实施

Aniline (Reagent)

ICS
71.040.30
CCS
G16
发布
2014-03-20
实施

Mid-level ethanol fuels for flexible-fuel automotive spark-ignition engines. Blending practice

ICS
75.160.20
CCS
G16
发布
2014
实施
2016-07-01

Unused hydrocarbon-based insulating liquids. Methods for evaluating the oxidation stability

ICS
29.040.10
CCS
G16
发布
2014
实施
2016-07-01

Ethanol as a petrol component. Determination of inorganic chlorides by potentiometric titration

ICS
71.080.60;75.160.20
CCS
G16
发布
2014
实施
2016-07-01

이 표준은 고정 오염원의 메탄 배출 농도 측정을 위한 수동 측정방법에 대해 적용한다.이 표준은 질량 농도 최대 1 500 mg/m3까지 유효한 측정방법에 대해 적용한다.

Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography

ICS
13.040.40
CCS
G16
发布
2013-12-30
实施
2013/12/30

本标准规定了M15车用甲醇汽油的术语和定义、分类和标识、要求、试验方法、检验规则以及标志、包装、运输、贮存和安全。 本标准适用于山东省内点燃式内燃机的M15车用甲醇汽油的生产和检验。

M15 methanol gasoline for vehicles

ICS
74.080.60
CCS
G16
发布
2013-06-13
实施
2013-07-10

本标准规定了调合M15车用甲醇汽油所需变性甲醇的术语和定义、要求、试验方法、检验规则以及标志、包装、运输、贮存和安全。 本标准适用于山东省内变性甲醇的生产和检验。

denatured methanol

ICS
74.080.60
CCS
G16
发布
2013-06-13
实施
2013-07-10

Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

ICS
71.080.01
CCS
G16
发布
2013-01-01
实施

1.1 This specification covers nitration grade toluene. 1.2 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 Consult OSHA regulations, supplier's Material Safety Data Sheets, and local regulations for all materials used in this specification.

Standard Specification for Nitration Grade Toluene

ICS
71.080.15 (Aromatic hydrocarbons); 87.060.30 (Solv
CCS
G16
发布
2013
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号