共找到 5669 条与 合成树脂、塑料基础标准与通用方法 相关的标准,共 378 页
GB/T 36214的本部分规定了在60 ℃~180 ℃下使用有机洗脱剂,通过体积排除色谱法(SEC)测定聚合物平均分子量和分子量分布的方法。依据聚合物标样构建的校正曲线计算得到平均分子量和分子量分布,因此该测试方法属于相对法(参见附录A及GB/T 36214.1—2018的附录A)。
Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 36214的本部分规定了一种用体积排除色谱法(SEC)测定聚合物平均分子量和分子量分布的方法。该方法用普适校正曲线代替传统的校正曲线来计算平均分子量和分子量分布。
Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 3682的本部分规定了在规定的温度和负荷条件下测定热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的方法。方法A是质量测量方法,方法B是位移测量方法。通常,热塑性塑料材料标准参考本部分规定测定熔体流动速率的试验条件。附录A中列出了热塑性塑料常用的试验条件。 熔体体积流动速率特别适用于填充和非填充的热塑性塑料的比较,以及不同填充量的填充材料的比较。如果已知材料在试验温度下的熔体密度,则MFR可以由MVR的测定结果确定,反之亦然。 本部分也可用于流变行为受水解(断链作用)、缩聚和交联影响的热塑性塑料,但仅当这些影响及测试结果的重复性和再现性在可接受的范围内时才适用。 本部分不适用于在测试过程中流变行为受到显著影响的材料。这些情况下,可采用GB/T 3682.2。
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
Characterisation and testing methods of recycled polypropylene (PP)
Standard practice for outdoor exposure testing of photodegradable plastics
Characterisation and testing methods of recycled poly(vinyl chloride)(PVC)
Characterisation and testing methods of recycled poly (ethylene terephthalate)(PET)
Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method
Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist
Polycarbonate film and sheet
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
Biaxially oriented polystyrene heat shrinkable film
Determination of shrinkage character for heat-shrinkable films
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号