共找到 3159 条与 塑料型材 相关的标准,共 211 页
Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 1:Polypropylene double wall corrugated pipes
GB/T 13663的本部分规定了给水用聚乙烯(PE)管道系统的术语和定义、符号、缩略语、材料和卫生要求。 本部分与GB/T 13663的其他部分一起,适用于水温不大于40 ℃,最大工作压力(MOP)不大于2.0 MPa,一般用途的压力输水和饮用水输配的聚乙烯管道系统及其组件。
Polyethylene(PE) piping systems for water supply.Part 1:General
Polyethylene structure-wall piping systems for underground usage—Part2: Polyethylene spirally enwound structure-wall pipes
Plastic equipment for water saving irrigation—Part 1:Drip tape with labyrinth on one side
Plastic equipment for water saving irrigation—Part 2: Pressure compensating emitter and emitting pipe
Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method
Plastic equipment for water saving irrigation—Part 3:Drip pipe and drip tape inlaid with emitters inside
Test method of the oxygen permeability of the multilayer composite plastics pipe
Polypropylene (PP) piping systems for hot and cold water installations—Part 2: Pipes
Polypropylene (PP) piping systems for hot and cold water installations—Part 1: General
Rigid polyvinyl chloride flooring
GB/T18742 的本部分规定了以聚丙烯混配料为原料,经注射成型的聚丙烯管件(以下简称管件)的定义、符号和缩略语、材料、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分与GB/T18742.1 、GB/T18742.2 一起适用于建筑物内冷热水管道系统,包括饮用水和采暖管道系统等。 注:选购方有责任根据其特定应用需求,结合相关法规、标准或规范要求,恰当选用本产品。 本部分不适用于灭火系统。 2
Polypropylene(PP) piping systems for hot and cold water installations—Part 3:Fittings
Test method for the wall thickness of plastic pipes by ultrasonic
Unplasticized poly(vinyl chloride) (PVC-U) structured-wall pipes for soil and waste discharge inside buildings
GB/T 33466的本部分规定了一种测量硬聚氯乙烯(PVC)管材样品加工温度的方法。该方法基于使用差示扫描量热法(DSC)来测量样品的热历史。 本部分适用于各种类型的硬PVC管材。
Rigid PVC pipes.Differential scanning calorimetry (DSC) method.Part 1:Measurement of the processing temperature
本标准规定了门、窗用未增塑聚氯乙烯(PVC-U)型材(以下简称为型材)中重金属、氯乙烯单体、邻苯二甲酸二(2-乙基)己酯限量的要求、试验方法、检验规则。 本标准适用于以聚氯乙烯树脂为主要原料并加入适当助剂和辅助材料制成的门、窗用未增塑聚氯乙烯(PVC-U)型材。
Indoor decorating and refurbshing materials.Limit of harmful substances of unplasticized polyvinyl chloride(PVC-U) profiles for the doors and windows
本标准规定了包装用聚乙烯热收缩薄膜(以下简称薄膜)的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以聚乙烯树脂为主要原料,采用一次吹塑法生产成型的薄膜。
Polyethylene heat-shrinkable film for packaging applications
GB 15558的本部分规定了以聚乙烯(PE)混配料为原料,经挤出成型的燃气用埋地聚乙烯(PE)管材(以下简称“管材”)的术语和定义、材料、要求、试验方法、检验规则、标志和包装、运输、贮存。 本部分规定的管材类型包括: --单层实壁管材; --管材外壁包覆可剥离热塑性防护层的管材。 本部分适用于PE 80和PE 100混配料制造的公称外径为16 mm~630 mm的燃气用埋地聚乙烯(PE)管材,管材的最大工作压力(MOP)基于设计应力确定,并考虑耐快速裂纹扩展(RCP)性能的影响。 在输送人工煤气和液化石油气时,应考虑燃气中存在的其他组分(如:芳香烃、冷凝液)在一定浓度下对管材性能的不利影响。
Buried polyethylene (PE) piping systems for the supply of gaseous fuels.Part 1:Pipes
GB/T 4219的本部分规定了工业用硬聚氯乙烯(PVC-U)管道系统管件的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于以聚氯乙烯(PVC)树脂为主要原料,经注射成型使用温度范围为一5 ℃~+ 45 ℃的工业用硬聚氯乙烯(PVC-U)管件(以下简称“管件”)。
Unplasticizedpoly (vinyl chloride) (PVC-U) piping system for industrial applications.Part 2:Fittings
GB/T 32018的本部分规定了给水用抗冲改性聚氯乙烯(PVC-M)注塑管件的材料、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于建筑物内外给水用管件。与GB/T 32018.1-2015《给水用抗冲改性聚氯乙烯(PVC-M)管道系统第1部分:管材》配套使用。 本部分规定的管件适用于压力下输送饮用水和一般用水,水温不超过45 ℃。
Modified impact resistance poly (vinyl chloride) (PVC-M) pipe system for water supply.Part 2:Fittings
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号