共找到 1145 条与 胶管、胶带、胶布 相关的标准,共 77 页
Steel cord conveyor belts—Longitudinal traction test—Part 2: Measurement of tensile strength
Light conveyor belts—Determination of the electrostatic field generated by a running light conveyor belt
Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
Light conveyor belts—Determination of the relaxed elastic modulus
Heat resistant conveyor belts of duck construction
本标准规定了各类用途软管的验证压力、最小爆破压力与最大工作压力的比率。
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures
本标准规定了用于自重含3.5 t 以下车辆内燃机(见ISO1176 的规定)中以1,2-乙二醇为冷却剂的增压或泄压冷循环系统的直式或预成型软管或纯胶管的要求。 本标准可用作分类方法,以使原始装备制造商4(OEMD可对不包括所规定的主要型别内的专用试验进行详细标注(参见附录D的示例)。 在这种情况下,软管或纯胶管不带有任何显示本标准编号的标记,而应按OEM的零部件图样详细标注的识别标记。
Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures
本标准规定了测定GB/T 28267.1[1]所述钢丝绳芯输送带中钢丝绳的平均横向位移和相对于绳平均高度的垂直位移的方法。 本标准适用于钢丝绳芯输送带。
Steel cord conveyor belts—Determination of the lateral and vertical displacement of steel cords
本标准规定了测定环形输送带(拼接)净长度的方法。 本标准适用于除含钢丝绳增强层以外所有构造的输送带。 本标准不适用于ISO 21183-1规定的轻型输送带。
Textile conveyor belts—Determination of the net length of an endless (spliced) conveyor belt
本标准规定了汽车辅机传动用PK型环形多楔带和带轮轮槽的主要尺寸。 本标准适用于PK型汽车辅机传动用环形多楔带和带轮。
Belt drives—Pulleys and V-ribbed belts for the automotive industry—PK profile :Dimensions
本标准规定了具有织物或金属带芯的普通用途输送带的覆盖层性能的类别,用来指导对输送带的使用。本标准规定了各类覆盖层的基本性能组合并确定了相应的测定方法。 本标准不适用于HG/T 4601.1规定的轻型输送带。
Conveyor belts—Characteristics of covers—Classification
本标准规定了一般传动用普通V带(以下简称V带)的结构、型号和标记、要求、抽样、试验方法及标志、标签、包装、运输和贮存。 本标准适用于一般机械传动装置用的普通V带。 本标准不适用于汽车、摩托车等机械传动装置。
Classical V-belt for general drive
本标准规定了测定橡胶输送带覆盖层的耐热性相对程度的要求及其试验方法,并规定了覆盖层暴露于热环境之后的硬度、拉断伸长率和拉伸强度的容许变化范围。 本标准适用于覆盖层厚度等于或大于4 mm的情况。 本标准不适用于ISO 21183-1[1]中规定的输送带。
Conveyor belts with heat-resistant rubber covers—Heat resistance of covers—Requirements and test methods
本标准规定了公称直径在150 以上的和型你股坎管组合件的拉伟载荷形变性能试验方法。 本标准适用于两端带法兰的大型橡胶软管组合件的拉伸试验。
Rubber hoses with large diameter—Tensile test
本标准规定了内铠装输泥橡胶软管及软管组合件的结构、尺寸、要求、试验方法、检验规则等。 本标准适用于在环境温度-20 ℃~+60 ℃下输送相对密度介于1.0 g/cm~2.3 g/cm的海水、淡水和淤泥、黏土、砂的混合物,尤其适用于输送珊瑚礁、砾石的橡胶软管。
Inner armoured rubber hoses and hose assemblies for conveying dredging soil
本标准规定了用于汽车涡轮增压器系统中,连接涡轮增压器、中冷器和内燃机的橡胶软管的要求,工作温度为-40 ℃~+ 250 ℃,工作压力为-0.01 MPa~+0.5 MPa。本标准所涉及的软管可以是直型的或异型的。
Rubber hoses for automotive turbochargers.Specification
本标准规定了测定ISO21183-1 所述轻型输送带的动态和静态摩擦系数的试验方法。
Light conveyor belts—Determination of the coefficient of friction
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号