共找到 158 条与 医用和食品工业用橡胶制品 相关的标准,共 11 页
Medical informatics - Messages concerning blood transfusion - Communication and data model.
Medical informatics - Messages concerning blood transfusion - Nominative delivery message and report on nominative delivery message.
1.1 This specification covers the minimum requirements for individually packaged male condoms made from natural rubber latex and intended for single use. This specification does not cover the specifications for lubricants or other dressing materials that may be applied to condoms except as noted in 3.2.1.2 This specification is intended to assist buyers in obtaining condoms of consistent quality. The safe and proper use of condoms is excluded from the scope of this specification.1.3 The applicability of this specification is as a design guideline and a reference test specification. It is not intended to be a routine quality control specification for condom manufacturing operations.1.4 The annexes in this specification include important information, such as that on apparatus or materials, that is a mandatory part of the specification but too detailed for inclusion in the main text.1.5 The appendixes in this specification contain information intended to provide guidance only and are not a mandatory part of the specification.1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Standard Specification for Rubber Contraceptives (Male Condoms)
Medical gloves for single use - Part 1 : requirements and testing for freedom from holes.
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
この規格はラテックス製コンドーム(以下,コンドームという。)の破裂容量及び破裂圧力の測定方法を規定する。
Rubber condoms -- Part 6: Determination of bursting volume and pressure
Single-use sterile surgical rubber gloves
1.1 This specification provides certain requirements for poly(vinyl chloride) gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers poly(vinyl chloride) gloves used in handling contaminated medical material. 1.2 This specification provides for poly(vinyl chloride) gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile or nonsterile or bulk nonsterile poly(vinyl chloride) gloves. 1.3 This specification does not cover two-dimensional heat sealed poly(vinyl chloride) gloves. 1.4 This specification is similar to that of Specification D3578 for rubber examination gloves.
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
1.1 This specification provides certain requirements for poly(vinyl chloride) gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers poly(vinyl chloride) gloves used in handling contaminated medical material. 1.2 This specification provides for poly(vinyl chloride) gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile or nonsterile or bulk nonsterile poly(vinyl chloride) gloves. 1.3 This specification does not cover two-dimensional heat sealed poly(vinyl chloride) gloves. 1.4 This specification is similar to that of Specification D3578 for rubber examination gloves.
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
1.1 This specification describes certain requirements for packaged sterile rubber surgical gloves used in conducting surgical procedures. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Rubber Surgical Gloves
1.1 This specification provides certain requirements for poly(vinyl chloride) gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers poly(vinyl chloride) gloves used in handling contaminated medical material. 1.2 This specification provides for poly(vinyl chloride) gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile or nonsterile or bulk nonsterile poly(vinyl chloride) gloves. 1.3 This specification does not cover two-dimensional heat sealed poly(vinyl chloride) gloves. 1.4 This specification is similar to that of Specification D3578 for rubber examination gloves.
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
1.1 This test method covers the detection of holes in medical gloves. 1.2 This test method is limited to the detection of holes that allow water leakage under the conditions of the test. 1.3 The smallest hole size that will allow water leakage in a medical glove has not been determined and is beyond the scope of this test method. 1.4 The safe and proper use of medical gloves is beyond the scope of this test method. 1.5 The values stated in SI units are to be regarded as standard. 1.6 This standard does not purport to address the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Detection of Holes in Medical Gloves
Additional lubricants and medicinal or non-medicinal preparations intended or likely to be placed in contact with male condoms. Compatibility. Specifications and test methods.
Non-Sterile Nitrile Gloves for Dentistry
Reusable rubber contraceptive diaphragms - Part 1: Classification, sampling and requirements
Reusable rubber contraceptive diaphragms - Part 4: Freedom from visible defects
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号