共找到 310 条与 其他橡胶制品 相关的标准,共 21 页
Polyurethane rubber sound insulation and shock absorption pad
Dip aramid cord for V-belts and V-belts
Rubberized wide-angle polycotton canvas
本标准规定了聚乙烯丙纶复合防水卷材的术语和定义、产品标记、要求、试验方法、检验规则以及标志、包装、运输与贮存
Polyethylene with polypropylene fiber composite sheets for waterproofing
3 术语和定义 4产品规格 5要求 6试验方法 7 检验规则 8 标志、包装、运输和贮存 附录A 附录B 附录C
Cone Rubber Fender
本标准规定了橡胶输送带用锦纶浸胶帆布、涤锦浸胶帆布、涤锦耐高温浸胶帆布的产品分类、技术要求、试验方法、检验规则以及包装、标志、贮存和运输。 本标准适用于橡胶输送带用锦纶浸胶帆布、涤锦浸胶帆布、涤锦耐高温浸胶帆布的品质鉴定和验收,其他橡胶制品用锦纶浸胶帆布、涤锦浸胶帆布、涤锦耐高温浸胶帆布也可以参照执行。
Dipped polyamide and polyester-polyamide canvas for rubber conveyors
Dip vinylon thread for rubber hose
Cots Part 2: Polyurethane Cots
本标准规定了油浸式变压器用阻尼橡胶材料的技术要求、检验分类及项目、检验方法、包装、运输和贮存等。 本标准适用于油浸式变压器油箱内、外隔振用阻尼橡胶材料的选用与检验。
Specifications for damping rubber materials for oil-immersed transformers
1.1 This specification covers unfilled, unpigmented FEP resin sheet and film less than 3.175 mm (0.125 in.) thick. Recycled materials are allowed in accordance with 6.2. 1.2 The values stated in SI units as detailed in IEEE/ASTM SI 10 are to be regarded as standard and the practices of IEEE/ASTM SI 10 incorporated herein. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 14, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for FEP Sheet and Film
本标准规定了客车用阻燃橡胶地板的技术要求、试验方法、检验规则,以及标志、包装、运输和储存。 本标准适用于以橡胶为主要原材料生产的客车用阻燃橡胶地板卷材(以下简称地板)。其他机动车辆用阻燃橡胶地板可参照使用。
Fire-retardant rubber floor coverings for passenger car
本标准规定了橡胶护舷(以下简称护舷)的分类,标记,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于以橡胶护舷本体形状变化为主吸收船舶冲击能量的中空式压缩橡胶护舷。π型橡胶护舷的要求可参考附录B。
Rubber fender
本标准规定了橡胶植草砖的术语和定义,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于以聚氨酯胶黏剂黏合橡胶颗粒经高温模压成型的具有双层结构的植草砖。
Rubber block for grassing terrace
本标准规定了带式输送机用聚氨酯防尘带的产品标记,产品结构,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于所有带式输送机的聚氨酯防尘带(以下简称防尘带)。
Polyurethane dust-proof tape for belt conveyor
本标准规定了层压机用氟硅复合橡胶压板的分类与标记,结构,要求,试验方法,检验规则以及标志、包装、运输与贮存。 本标准适用于光伏太阳能电池多晶硅生产设备的层压机用橡胶压板。
FKM and silicone rubber laminated plates for laminator
本标准规定了普通输送带用整体织物带芯的产品分类,技术要求,试验方法,检验规则以及标志、包装、贮存和运输。 本标准适用于普通输送带用整体织物带芯(以下简称带芯)的品质鉴定和验收。
Solid woven carcass of textile conveyor belts for general use
本部分规定了造纸胶辊(以下简称胶辊)的分类与标记,产品结构,要求,试验方法,检验规则以及标志、包装、运输和贮存等。 本部分适用于造纸机械中的伏辊类、导辊类、压榨辊类、施胶辊类、压光辊类,其他类似胶辊可参考使用。
Rubber roller.Part 5: rubber roller for paper making
Rubber or plastics covered rollers - Specifications - Part 2: Surface characteristics
This part of ISO 6123 specifies requirements for the measured hardness of rubber or plastics covered rollers.
Rubber or plastics covered rollers - Specifications - Part 1: Requirements for hardness
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号