G81 感光材料 标准查询与下载

HG/T 4004-2008 医用感绿X射线胶片

本标准规定了医用感绿X射线胶片的要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于医用感绿X射线胶片。

Medical sensitive-green X-ray film

HG/T 4005-2008 医用感蓝X射线胶片

本标准规定了医用感蓝X射线胶片的要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于医用感蓝X射线胶片。

Medical sensitive-blue X-ray film

JIS K 7641:2008 成像材料.已处理的安全摄影胶片.贮存操作规程

この規格は，大きさには関係なく，ロール状，ストリップ状，シート状又はアパーチュアカードの形態の現像処理済み安全写真フィルム(以下，“写真フィルム”という。)について，その望ましい保存条件，保存設備，取扱方法及び検査方法について規定する。

Imaging materials -- Processed safety photographic films -- Storage practices

ASTM E1815-08 工业放射摄影胶片系统分类用标准试验方法

This test method provides a relative means for classification of film systems used for industrial radiography. The film system consists of the film and associated processing system (the type of processing and processing chemistry). Section 9 describes specific parameters used for this test method. In general, the classification for hard X-rays, as described in Section 9, can be transferred to other radiation energies and metallic screen types, as well as screens without films. The usage of film system parameters outside the energy ranges specified may result in changes to a film/system performance classification. The film performance is described by contrast and noise parameters. The contrast is represented by gradient and the noise by granularity. A film system is assigned a particular class if it meets the minimum performance parameters: for Gradient G at D – D0 = 2.0 and D – D0 = 4.0, and gradient/noise ratio at D – D0 = 2.0, and the maximum performance parameter: granularity σD at D = 2.0, and gradient/noise ratio at D – D0 = 2.0. This test method describes how the parameters shall be measured and demonstrates how a classification table can be constructed. Manufacturers of industrial radiographic film systems and developer chemistry will be the users of this test method. The result is a classification table as shown by the example given in Table 2. Another table also includes speed data for user information. Users of industrial radiographic film systems may also perform the tests and measurements outlined in this test method, provided that the required test equipment is used and the methodology is followed strictly. The publication of classes for industrial radiography film systems will enable specifying bodies and contracting parties to agree to particular system classes, which are capable of providing known image qualities. See 8. ISO 11699–1 and European standard EN 584-1 describe the same method for classification of film systems for industrial radiography, but its class definitions and number of classes do not align exactly with this test method. International users of these standards should be aware of these differences for their particular applications. Note 18212;ASTM research report E07–1005 contains documentation of technical methods used during the development of this test method. 1.1 This test method covers a procedure for determination of the performance of film systems used for industrial radiography. This test method establishes minimum requirements that correspond to system classes. 1.2 This test method is to be used only for direct exposure-type film exposed with lead intensifying screens. The performance of films exposed with fluorescent (light-emitting) intensifying screens cannot be determined accurately by this test method. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associate......

Standard Test Method for Classification of Film Systems for Industrial Radiography

ASTM E1254-08 射线照片和未曝光工业用射线照相胶片储存的标准指南

The provisions of this guide are intended to control the quality of industrial radiographs and unexposed films only and are not intended for controlling the acceptability of the materials or products radiographed. It is further intended that this guide be used as an adjunct to Guide E 94. The necessity for applying specific control procedures such as those described in this guide is dependent to a certain extent, on the degree to which a user adheres to good processing and storage practices as a matter of routine procedure.1.1 This guide may be used for the control and maintenance of industrial radiographs and unexposed films used for industrial radiography. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 18212;For information purposes, refer to Terminology E 1316. The terms stated therein, however, are not specifically referenced in the text of this document. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

ISO 18902:2007 成像材料.已加工的成像材料.相册、框架和存储材料

This International Standard specifies the principal physical and chemical requirements for filing enclosures, containers, albums and frames, particularly designed for storing wet or dry processed films, plates and papers. This International Standard covers requirements for paper and board, plastic, metal, adhesives (except spray adhesives), writing, labelling and printing materials. It is applicable to photographs made with hardcopy materials. Included are photographs made with traditional chromogenic (“silver-halide”) and silver dye bleach photographic materials, dye- and pigment-based inkjet, dye diffusion thermal transfer (“dye sublimation”), liquid- and dry-toner electrophotography, and other analogue and digital print processes. This International Standard applies to storage copies and does not include work copies as defined in Annex A. It applies to visual records for extended-term preservation and to visual records for preservation for moderate periods of time. The requirements are limited to the characteristics that may affect the enclosed item chemically or physically when it is stored under recommended conditions. (For methods of proper storage, see ISO 18911[15], ISO 18918[17] and ISO 18920[19]). This International Standard does not apply to the material used as a support for prints or documents. (For permanence requirements for paper for documents, see ISO 9706[12]).

Imaging materials - Processed imaging materials - Albums, framing and storage materials

KS A ISO 20462-3:2007 摄影.评估图像质量的心理生理试验方法.第3部分:质量尺度法

이 규격은 사진 화질을 주관적으로 평가하는 것에 관한 규격 중 제3부에 해당한다. 이 규격

Photography－Psychophysical experimental methods for estimating image quality－Part 3：Quality ruler method

KS A ISO 20462-1:2007 摄影.评估图像质量的心理生理试验方法.第1部分:心理生理学原理概述

이 규격은 사진 화질의 주관적 평가에 대한 시리즈 규격 중 제1부에 해당한다. 이 규격은

Photography－Psychophysical experimental methods for estimating image quality－Part 1：Overview of psychophysical elements

KS A ISO 18929:2007 成像材料.湿处理银胶式黑白摄影反射光印片.避光储存规范

1.1 이 규격은 모든 종류의 은-젤라틴 반사용 사진 인화물의 암실보관을 위해 제정되었다.

Imaging materials－Wet－processed silver－gelatin type black－and－white photographic reflection prints－ Specifications for dark storage

KS A ISO 5763:2007 摄影.电子闪光装置.曝光自动控制

이 규격은 플래시에서 사용되는 자동 노출 조절에 적용되며, 정확하고 일관된 제어방법을 서술

Photography－Electronic flash equipment－ Automatic control of exposure

KS A ISO 20462-2:2007 摄影.评估图像质量的心理生理试验方法.第2部分:三重对比法

이 규격은 소프트카피와 하드카피 사진의 주관적 화질평가를 위한 표준 정신물리학적 실험 방법

Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method

KS A ISO 7187:2007 摄影.直接彩色照相材料.ISO感光速度的测定

이 규격은 직접 양화방식 컬러 인화 카메라 재료의 ISO 감광도 결정을 위한 방법을 명시하

Photography－Materials for direct-positive color-print cameras－Determination of ISO speed

KS A ISO 18935:2007 成像材料.版样上的彩色图像.室内印制的彩色图像防水性测定.

이 규격은 프린트된 컬러 이미지의 물에 대한 내수성을 결정하기 위한 테스트를 다루고 있다.

Imaging materials－Color images on paper prints－Determination of indoor water resistance of printed color images

KS A ISO 3028:2007 摄影.照相机闪光照明光源.ISO光谱分布指数(ISO/SDI)的测定

이 규격은 주광용 필름을 사용할 때, 주광에 의한 결과와 플래시 벌브나 전자 플래시를 이용

Photography－Camera flash illuminants－Determination of ISO spectral distribution index(ISO/SDI)

KS A ISO 6:2007 摄影.黑色和白色图案相机负片/加工系统的ISO感光度的测定

이 규격은 정지영상 사진을 위해 사용된 흑백 네거티브 카메라의 ISO 감광도를 결정하기 위

Photography－Black－and－white pictorial still camera negative film/process systems－Determination of ISO speed

KS A ISO 18922:2007 成像材料.成像摄影胶片.测定耐划伤性的方法

이 규격은 현상 처리된 사진용 필름의 내구성을 평가하는 방법에 대해 기술하고 있다. 이 규

Imaging materials－Processed photographic films－Methods for determining scratch resistance

KS A ISO 8581:2007 摄影.电子闪光装置.同步软件连接器

이 규격은 사진용 전자 플래시에서 사용되는 전자 접속설비(플러그, 소켓)에 적용되며, 플래

Photography－Electronic flash equipment－Connectors to synchro-cord

KS A ISO 18923:2007 成像材料.聚酯载体磁带.保管规则

이 규격은 롤 형태인 폴리에스테르 지지체 자기 테이프의 보관 상태, 보관 시설, 동봉물,

Imaging materials－Polyester-base magnetic tape－Storage practices

KS A ISO 5800:2007 摄影.静物照相用彩色负片.ISO感光速度的测定

이 규격은 사진용 컬러 네거티브 필름의 ISO 감광도를 결정하는 방법을 명시하고 있다. 이

Photography－Color negative films for still photography－Determination of ISO speed

KS A ISO 18928:2007 成像材料.未显像的摄影胶卷和相纸.保管规定

이 규격은 현상되지 않은 사진 재료의 보관 환경을 규정하고 있다. 그러므로 현상된 필름과

Imaging materials－Unprocessed photographic films and papers－Storage practices