H10 金属化学分析方法综合 标准查询与下载

DIN EN 13523-2:2014 涂覆金属卷材.试验方法.第2部分:光泽度;EN 13523-2:2014的德文版本

Coil coated metals - Test methods - Part 2: Gloss; German version EN 13523-2:2014

DIN EN 13523-14:2014 涂覆金属卷材.试验方法.第14部分:粉化(Helmen法);EN 13523-14:2014的德文标准

Coil coated metals - Test methods - Part 14: Chalking (Helmen method); German version EN 13523-14:2014

DIN EN 13523-5:2014 涂覆金属卷材.试验方法.第5部分:耐快速变形(冲击试验);EN 13523-5:2014的德文版本

Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014

DIN EN 13523-3:2014 涂覆金属卷材.试验方法.第3部分:色差.仪器比较;EN 13523-3:2014的德文版本

Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison; German version EN 13523-3:2014

NF A05-215*NF EN ISO 17081:2014 使用电化学技术进行氢渗透的测量和金属中氢吸收和迁移的测定方法

Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique

ISO 17081:2014 氢渗透的测量方法和用电化学法测定金属中的氢吸收和迁移

Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique

JIS T 6002:2014 金属材料的腐蚀试验

Corrosion test methods for dental metallic materials

ASTM E2194-14(2017) 金属薄片染色材料多角度颜色测量的标准试验方法

5.1 Instrumental Measurement Angles—This test method is designed to provide color data at specific measurement angles that can be utilized for quality control, color matching, and formulating in the characterization of metal flake pigmented materials. 5.2 Materials—This test method provides meaningful color information for metal flake pigmented materials. This test method has been tested and verified on paint and coatings, and the same principles should apply to plastics containing metallic flake. For materials containing pearlescent materials refer to Test Method E2539. 5.3 Utilization—This test method is appropriate for measurement and characterization of metal flake pigmented materials. These data may be used for quality control, incoming inspection, or color correction purposes. 5.4 Specimen Requirements—Even though a pair of specimens have the same color values at three angles, if there are differences in gloss, orange peel, texture, or flake orientation, they may not be a visual match. Note 2: Information presented in this test method is based upon data taken on metallic materials coatings. Applicability of this test method to other materials should be confirmed by the user. 1.1 This test method covers the instrumental requirements, standardization procedures, material standards, and parameters needed to make precise instrumental measurements of the colors of gonioapparent materials. This test method is designed to encompass gonioapparent materials; such as, automotive coatings, paints, plastics, and inks. 1.2 This test method addresses measurement of materials containing metal flake and pigments. The measurement of materials containing metal flakes requires three angles of measurement to characterize the colors of the specimen. The optical characteristics of materials containing pearlescent and interference materials are not covered by this test method. Note 1: Data taken by utilizing this test method are for gonio-appearance quality control purposes. This procedure may not necessarily supply appropriate data for spatial-appearance or pigment identification. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This interna......

Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials

DB45/T 939-2013 土壤、肥料、饲料、毛发中汞含量的测定 直接测汞仪法

本标准适用于土壤、肥料、饲料、毛发、等产品中汞含量的测定。

Determination of Mercury Content in Soil, Fertilizer, Feed and Hair Direct Mercury Meter Method

ANSI/ASTM E2564:2013 通过直接显微镜计数(DMC)法进行金属加工流体中分支杆菌计数的试验方法

Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

JC/T 2132-2012 钛酸锶钡中掺杂元素和微量元素含量的测定 电感耦合等离子体原子发射光谱法

本标准规定了采用电感耦合等离子体原子发射光谱(ICP-AES)法测定钛酸锶钡中掺杂元素和微量元素含量的方法。本标准适用于以Ba，SrTiO为基体、掺杂各种元素制备成的材料以及相应的粉体材料。掺杂元素和微量元素包括铝、铋、钙、铁、镧、锂、镁、锰、铌、锑、硅、钐、钇等13种元素。13种元素的检测范围见表1。

Determination of doped and trace elements in barium strontium titanate (BST).Inductively coupled plasma atomic emission spectrometric method

DL/T 1161-2012 超 (超)临界机组金属材料及结构部件检验技术导则

The technical inspection codes for metal and structural components in ultra-supercritical units

KS D ISO 7627-1:2012 硬质合金.火焰原子吸收光谱法的化学分析.第1部分:通用要求

이 표준은 불꽃 원자 흡수 분광법을 이용한 초경합금의 화학 분석을 위한 일반적인 요구 사항

Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 1：General requirements

KS D ISO 7523:2012 镍.银、砷、铋、镉、铅、锑、硒、锡、和铊含量的测定.电热原子吸收光谱测定法

이 표준은 고순도이고, 정련, 가공 또는 주조된 니켈 내의 은, 비소, 비스무트, 카드뮴,

Nickel-Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents-Electrothermal atomic absorption spectrometric method

KS D ISO 6351:2012 镍.银、铋、镉、钴、铜、铁、锰、铅和锌含量的测定.火焰原子吸收光谱测定法

이 표준은 표 1에 나타난 농도 범위에서 정련, 가공 또는 주조된 니켈 중의 은, 비스무트

Nickel－Determination of silver, bismuth, cadmium, cobalt, copper,iron, manganese, lead and zinc contents－Flame atomic absorption spectrometric method

KS D 7042-2012 化学分析用白金坩埚

이 표준은 화학 분석용 백금 도가니(뚜껑을 포함한다.) (이하 도가니라 한다.)에 대하여

Platinum crucibles for chemical analysis

KS D 7041-2012 化学分析用白金杯

이 표준은 화학 분석에 사용하는 백금 접시(이하 접시라 한다.)에 대하여 규정한다.

Platinum dishes for chemical analysis

DIN EN 13523-19:2011 卷材覆层金属.试验方法.第19部分:大气曝露试验的样板设计和方法;德文版本EN 13523-19-2011

This part of EN 13523 specifies the panel design and describes the procedure for determining the resistance to outdoor exposure of an organic coating on a metallic substrate.

Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing; German version EN 13523-19:2011

DIN EN 13523-11:2011 卷材覆层金属.试验方法.第11部分:耐溶剂(摩擦测试);德文版本EN 13523-11:2011

This part of EN 13523 specifies the procedure for evaluating the degree of curing by determining the resistance of an organic coating on a metallic substrate to solvents.

Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test); German version EN 13523-11:2011

ASTM E55-11(2017) 为测定锻造有色金属和合金化学成分而进行取样的标准实施规程

1.1 This practice covers the sampling, for the determination of chemical composition (Note 1), of nonferrous metals and alloys that have been reduced to their final form by mechanical working; that is, by such means as rolling, drawing, and extruding. 1.1.1 Refer to Practice E255 for copper and copper alloys. Note 1: The selection of correct portions of material and the preparation of a representative sample from such portions are necessary prerequisites to every analysis, the analysis being of no value unless the sample actually represents the average composition of the material from which it was selected. 1.2 In special cases, when agreed upon by the purchaser and the manufacturer, the heat analysis may be accepted as representative of the composition of the finished product. In such cases, the identity of each heat of metal should be maintained through each stage of the manufacturing process to the final form. This method of sampling is not intended to apply under these conditions. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition