共找到 1597 条与 重金属及其合金分析方法 相关的标准,共 107 页
本方法规定了铜及铜合金中锡含量的测定方法。 方法一 :塞曼效应电热原子吸收光谱法:测定范围:0.0001%~0.0020%。 方法二 :苯基荧光酮-聚乙二醇辛苯基醚分光光度法:测定范围:>0.0010%~0.50%。 方法三: 碘酸钾滴定法:测定范围:>0.50%~10.00%。
Methods for chemical analysis of copper and copper alloys.Part 10: Determination of tin content
1 方法一 高频红外吸收法 本方法规定了铜及铜合金中碳、硫含量的测定方法。 本方法适用于铜及铜合金中碳、硫含量的测定。测定范围:碳0.0010%~0.20%;硫0.0010%~0.030%。 方法二 燃烧-碘量法 本方法规定了铜及铜合金中硫含量的测定方法。 本方法适用于铜及铜合金中硫含量的测定。测定范围:0.00040%~0.0020%。 方法三 燃烧滴定法 本方法规定用燃烧滴定法测定铜及铜合金中硫含量。 本方法适用于在ISO国际标准中所列各种铜及铜合金中硫含量大于0.010%(m/m)的测定。
Methods for chemical analysis of copper and copper alloys.Part 4:Determination of carbon and sulfur content
本方法规定了铜及铜合金中钴含量的测定方法。 本部分适用于铜及铜合金中钴含量的测定。方法一测定范围:0.000 10%~0.002 0%。方法二测定范围:>0.002 0%~3.00%。
Methods for chemical analysis of copper and copper alloys.Part 15:Determination of cobalt content
本部分规定了锑及三氧化二锑中铁量的测定方法。 本部分适用于锑及三氧化二锑中铁量的测定。测定范围:0.00020%~0.30%。
Methods for chemical analysis of antimony and antimony trioxide.Determination of iron content.Orthophenanthroline spectrophotometric method
本部分规定了锑及三氧化二锑中砷量的测定方法。 本部分适用于锑及三氧化二锑中砷量的测定。测定范围:0.0020%~0.60%。
Methods for chemical analysis of antimony and antimony trioxide.Determination of arsenic content.Arsenic molybdenum blue spectrophotometric method
本部分规定了锑及三氧化二锑中铅量的测定方法。 本部分适用于锑及三氧化二锑中铅量的测定。测定范围:0.0020%~0.75%。
Methods for chemical analysis of antimony and antimony trioxide.Determination of lead content.Flame atomic absorption spectrophotometric method
本部分规定了锑及三氧化二锑中硒量的测定方法。 本部分适用于锑及三氧化二锑中硒量的测定。测定范围:0.0003%~0.050%。
Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
本部分规定了锑及三氧化二锑中铜量的测定方法。 本部分适用于锑及三氧化二锑中铜量的测定。测定范围:0.00020%~0.30%。
Methods for chemical analysis of antimony and antimony trioxide.Determination of copper content.Flame atomic absorption spectrophotometric method
本部分规定了镍中铁含量的测定方法。 本部分适用于镍中铁含量的测定。测定范围:0.0008%~0.7%。
The methods for chemical analysis of nickel. Determination of iron content. Sulfosalicy lic acid spectrophotometric method
本部分规定了镍中砷、锑、铋、锡、铅含量的测定方法。 本部分适用于镍中砷、锑、铋、锡、铅含量的测定。测定范围:0.0002%~0.0030%。
The methods for chemical analysis of nickel. Determination of arsenic, antimony, bismuth, tin and lead contents. Electrothermal atomic absorption spectrometric method
本部分规定了镍中砷、镉、铅、锌、锑、铋、锡、钴、铜、锰、镁、硅、铝、铁等杂质元素含量的发射光谱测定方法。 本部分适用于镍中砷、镉、铅、锌、锑、铋、锡、钴、铜、锰、镁、硅、铝、铁等杂质元素含量的测定。 本部分对于镍中上述杂质元素含量的测定范围规定如下:对于测定工作曲线满足本部分要求的,各杂质元素的分析下限为所使用标准样品最低含量的90%,分析上限为所使用标准样品最高含量的110%;对于工作曲线局部满足要求的,选取工作曲线中满足要求的部分确定各杂质元素的分析范围。 本部分规定了评价以电弧型发射光谱仪得到分析值的客观标准。由于现有的光谱仪类型广泛,完全规定所有条件存在困难,因此,本部分不用来规定仪器的型号或将仪器的响应换算为浓度单位的程序。
The methods for chemical analysis of nickel Determination of arsenic cadmium lead zinc antimony bismuth tin cobalt copper manganese magnesium silicon aluminium iron contents Atomic emission spectrometric method
本部分规定了镍中硫含量的测定方法。 本部分适用于镍中硫含量的测定。测定范围:0.0010%~0.050%。
The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
本部分规定了镍中碳含量的测定方法。 本部分适用于镍中碳含量的测定。测定范围:0.0020%~0.20%。
The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
本部分规定了镍中硅含量的测定方法。 本部分适用于镍中硅含量的测定。测定范围:0.0005%~0.0025%。
The methods for chemical analysis of nickel. Determination of silicon content. Molybdenum blue spectrophotometric method
本部分规定了镍中铝量的测定方法。 本部分适用于镍中铝量的测定。测定范围:0.0003%~0.002%。
The methods for chemical analysis of nickel. Determination of aluminium content. Electrothermal atomic absorption spectrometric method
本部分规定了镍中磷含量的测定方法。 本部分适用于镍中磷含量的测定。测定范围:0.0005%~0.03%。
The methods for chemical analysis of nickel. Determination of phosphorous content. Molybdenum blue spectrophotometric method
本部分规定了镍中镁含量的测定方法。 本部分适用于镍中镁含量的测定。测定范围:0.0005%~0.002%。
The methods for chemical analysis of nickel. Determination of magnesium content. Flame atomic absorption spectrometric method
本部分规定了镍中镉、钴、铜、锰、铅、锌含量的测定方法。 本部分适用于镍中镉、钴、铜、锰、铅和锌含量的同时测定,也适用于其中一个元素的独立测定。测定范围见表1。
The methods for chemical analysis of nickel Determination of cadmium cobalt copper manganese lead and zinc contents Flame atomic absorption spectrometric method
本部分规定了锌及锌合金中铅、镉、铁、铜、锡、铝、砷、锑、镁、镧、铈元素含量的测定方法。本部分适用于锌及锌合金中铅、镉、铁、铜、锡、铝、砷、锑、镁、镧、铈元素含量的测定。测定范围见表l:┏━━━━━━┳━━━━━┳━━━━━┳━━━━━┳━━━━━┳━━━━━┳━━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┓┃ 元素 ┃ Pb ┃ Cd ┃ Fe ┃ Cu ┃ Sn ┃ A1 ┃ As ┃ Sb ┃ La ┃ Ce ┃ Mg ┃┣━━━━━━╋━━━━━╋━━━━━╋━━━━━╋━━━━━╋━━━━━╋━━━━━╋━━━━╋━━━━╋━━━━╋━━━━╋━━━━┫┃ ┃0.000 5 ┃ 0.000 5 ┃ 0.000 5 ┃ 0.000 2 ┃ 0.000 5 ┃ 0.000 5 ┃ 0.001 ┃ 0.002 ┃ 0.005 ┃ 0.005 ┃ 0.O05 ┃┃ 含量/% ┃ ┃ ┃ ┃ ┃ ┃ ┃ ┃ ┃ ┃ ┃ ┃┃ ┃~2.0 ┃~O.50 ┃~O.30 ┃~6.OO ┃~O.O3 ┃~12.0 ┃~O.02 ┃~O.5 ┃~0.5 ┃~0.5 ┃~0.5 ┃┗━━━━━━┻━━━━━┻━━━━━┻━━━━━┻━━━━━┻━━━━━┻━━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┛
The methods for chemical analysis of zinc and zinc alloys-The determination of lead,cadmium,iron,copper,tin,aluminium,arsenic,stibium,magnesium lanthanum and cerium contents-The inductively coupled plasma-optical emission spectrometric method
本部分规定了锌及锌合金中镧、铈合量的测定方法。本部分适用于锌及锌合金中镧、铈合量的测定。测定范围:0.005 0%~0.20%。
The methods for chemical analysis of zinc and zinc alloys-The determination of lanthanum and cerium contents-The tri-bromide arsenazo spectrophotometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号